Other Products / Services #4073256

SWA Order No: SWA-1080-A1-R0

Features:

• Used for signal checking


• Servicing of 3U rack cards with Harting connector

SWA Order No: SWA-1022-A1-R0

Technical Data:

• Based on SIEMENS PLC S7 214


• Provision for 2 analog input and 2 analog output modules


• 10 digital output 24V DC


• 14 digital input 24V DC


• Power Supply 230V.


• Works on SIEMENS MICROWIN software.


• Digital outputs are displayed by indication lamp on the panel


• Inputs can be given through push buttons selector switch, emergency stock push buttons.


• Analog inputs can be given through potentiometer

Ready to install 2/4 Option Coffee vending M/C control Board

SWA Order No. :
SWA-1034-A1-R0
SWA-1034A-A1-R0

Characteristics:

• 12V DC power supply


• Microcontroller based control unit with 2x20 character LCD display , multifunction push buttons with Led indication


• RS 232 communication


• RFID Card reader for e-billing facility

SWA Order No. :SWA-1076-A1-R0

Application:

The logic controller for bakery mixer which is designed for preparing dough for all types of bread and confectionery products in the mixer.

Technical Data:

• 8 input optically isolated 0-24V.


• 10 relay output @ 6A

SWA Order No. : SWA-1075-A1-R0
Application: For Drive Control

Technical Data

SWA Order No : SWA-1093-A1-R0

Features

• A/D and D/A functions are achieved using IC AD3964RJD, AD390JD


• This card can be interfaced with CPU PE-2080


• This card can replace PE-2029

SWA Order No. :SWA-1035-A1-R0

POWER SUPPLY FOR SIWAREX , 5V AND 15V WITH RELAY LOGIC

Technical Data:

• SIEMENS SIWAREX weighing system


• Power supply for control card


• Inbuilt in SIWAREX-P


• 7MH4205-1AC01 module.

SWA Order No : SWA-1094-A1-R0

Features

• 2 Channel proportional amplifier


• Maximum current 800mA


• Operating frequency 200Hz


• This card can replace PE-2025


• This card can be interfaced with CPU PE-2080

SWA Order No : SWA-1092-A1-R0

Features

• Z80 CPU based Computer.


• Used to control the Hydraulic Control of Wheel and Axle Plant Press


• Supports analog and digital signals in expanded rack


• This card can replace PE-2080

SWA Order No : SWA-1109-A1-R0

Features

• Magnetization & Demagnetization circuit for Conveyer System

SWA Order No : SWA-1095-A1-R0

Features

• This card is used for running hydraulic pumps


• This card can be interfaced with CPU PE-2080


• This card can replace PE-2008

SWA Order No : SWA-1105-A1-R00

Features

• Used with SIEMENS 6RA22 DC drive


• Equivalent to C98043-A1604-L1


• Used for thyristor gate firing circuit.


• Snubber Circuit is built into it.

SWA Order No : SWA-1038A-A1-R0

Features

• Separate cards mounted in 6U rack facilitating easy maintenance and test


• 200W Programmable DC power supplies with built in RS-232 & RS-485 interface with GPIB optional.


• Easy availability of voltages and resistances on facia


• Flashing through BDM connector on Facia


• Used in automobile industry for testing ECU


• Application: Test ZIG using in Automobile Industry

SWA Order No. : SWA-1021-A1-R0

Technical Data:

• On delay and Off delay timer with preset value 0- 99 secs / minutes / Hrs


• Timer with relay output , 12V and 5V outputs

SWA Order No : SWA-1006-A1-R1

Technical Data

• Built with 66 keys both function & numerical keys


• Communicate with R series computer on 3964R Protocol


• Ruggedly built for industrial application

SWA Order No : SWA-1006-A2-R1

Technical Data

• Built with 128 keys both function & numerical keys


• Communicate with R series computer on 3964R Protocol


• Ruggedly built for industrial application

Technical Data

SWA Order No. :SWA-1100-A1-R0

Applications:

• Micro Controller Based Level Controller


• Three Relays can be programmed to make it on at different levels


• Can be used for pump controller


• Can be used with any sensor to control different control system activities


• Can be programmed without any devices.

SWA Order No : SWA-1099-A1-R0

Technical data

• 0-40A to 0-10V


• 24V power supply


• Microcontroller based.


• Can be programmed for any signals for 3 levels to operate 3 relays


• Signal is 0-10V

SWA Order No. : SWA-1007-A1-R1

Features:

• Pulse amplifier assembly equivalent to 6QN1013-3AD

Microcontroller Based Proportional Amplifier with LCD Display for Valve control. This module is suitable for control of proportional directional valves and pressure valves without position feedback.

Technical Data:

• Four command values adjustable with potentiometers


• Differential input


• Step function generator


• Ramp generator with five ramp times


• Two pulsed current output stages


• LCD display of parameters namely command value(W) and solenoid current (IA & IB) using PIC-Microcontroller


• Polarity protection for the voltage supply


• Din-Rail mountable


• Equivalent to VT 3006 Rexroth


• DIN RAIL mountable


• No addition card holder required

SWA Order No : SWA-1107-A1-R0

Technical Data

• Electro Static Precipitator (ESP)controller board


• Used for condensation of the dust in power plants or from any chimney where the gas is allowed to go out.


• BAPCON control board

SWA Order No: SWA-1011-A1-R1

Technical Data:

• It Converts TTY signal to RS232 signal


• 15 Pin D Sub connection at PLC side


• 9 Pin D sub connection at PC side


• Requires RS232 port on PC as Com1 or Com2

SWA Order No: SWA-1087-A1-R0

Technical Data:

• Communication cable between OP7 and PC


• 15 Pin D Sub connection at PLC side


• 9 Pin D sub connection at PC side

SWA Order No : SWA-1038-A1-R1

Technical Data

• Based on Microcontroller MC9S12DP512


• Designed to have following communication ports


• 2 numbers of RS232 ports


• 4 numbers of CAN bus


• 8 number of Analog Inputs


• Digital data bus for interfacing to Digital input output, PWM modules, MOSFET modules, Resistance modules, LCD board & Power Supply board


• Facility for can short or can open is available.

SWA Order No : SWA-1042-A1-R0

Technical Data

• Consists of 5V , +/-15V and also Programmable TDK Lambda Dual power supplies


• Voltage Selectable through programming terminal

SWA Order No. :
Triggering Thyristors: SWA-1005-A1-R2

Features:

• Pulse Transformer assembly for Triggering Thyristors used in DC drives e


• Specially suitable SIMDYNE C Drive BHEL / SIEMENS make


• Pulse transformer assembly equivalent to 6QN1010-4AD

SWA Order No : SWA-1041-A1-R0

Technical Data

• 8 Digital Output discreet board


• Output 0.02% accuracy

SWA Order No :
Electronic control board for Bakery Oven system : SWA-1089-A1-R0
Oven Controller keyboard : SWA-1090-A1-R0
Logic embedded system : SWA-1071-A1-R0
MAX 6675 Interface Card: SWA-1073-A1-R0

Features

• The major components used in oven are Blower motor, Burner, Turn table motor, Hood motor, Solenoid Valve


• The Burner is source of heat and runs on diesel or LPG. The burner is located in the Burner chamber.


• The Blower blows the hot air from burning chamber to the baking chamber of the oven.


• The baking chamber is the area where the job is loaded on a stand, which is mounted on a turn table.


• The turn table rotates at a constant pace, which exposes the job evenly to hot air and bakes the food.


• The solenoid valve controls the water inlet and used for steaming purpose during the baking process.


• The hood motor is located on top of the baking chamber and used to exhaust the excess steam from the baking chamber after the baking process, with the door closed.