Our Products
Specifications
Lenth of Bed | 1675(5'6") | 2135(7') | 2745(9') | 3048(10') | 3660(12') |
---|---|---|---|---|---|
Width of Bed | 324 | 324 | 324 | 324 | 324 |
Height of Center | 254 | 254 | 254 | 254 | 254 |
Swing over Bed | 455 | 455 | 455 | 455 | 455 |
Swing over Cross Slide | 255 | 255 | 255 | 255 | 255 |
Swing in Gap | 725 | 725 | 725 | 725 | 725 |
Admit Between Center | 555 | 965 | 1575 | 1880 | 2490 |
Spindle Bore | 52 | 52 | 52 | 52 | 52 |
Aprox Weight | 1200Kg. | 1325Kg. | 1450Kg. | 1600Kg. | 1800Kg. |
Tail Stock Taper | MT-4 | ||||
Tail Stock Ram Travel | 175 | ||||
Morse Tapper of Ram | 38 | ||||
Leading Screw Dia. / Threads | 4 TPL | ||||
No. of Spindle Speed | 8/30 To 495 RPM | ||||
Range of Threads | 1 To 6mm / 2 To 24 TPI | ||||
Electric Motors / Speed | 3H.P. / 1440 RPM 2H.P. / 1140 RPM / 75 mm Motor Pulley 3H.P. / 1440 RPM 3H.P. / 1440 RPM | ||||
Note : We supply Light duty Lathe Machines as well |
Specifications
Model No | Motor HP | No.of pistion | Pressure PSIG | pistn displacment cfm | Receiver liters |
GC-05 | 0.5 | 1 | 125 | 2 | 45 |
GC-101 | 1 | 1 | 125 | 3.2 | 70 |
GC-102 | 1 | 2 | 125 | 4 | 70 |
GC-151 | 1.5 | 1 | 125 | 4.5 | 70 |
GC-201 | 2 | 1 | 125 | 6 | 135 |
GC-202 | 2 | 2 | 125 | 6.2 | 135 |
GC-202 | 2 | 2 | 125 | 9 | 135 |
GC-184SS | 3 | 2 | 100 | 13.2 | 180 |
GC-294 | 5.0/7.5 | 2 | 8 | 24.0/31.0 | 200 |
GC-305 | 7.5/10.0 | 2 | 60 | 47.6/52.0 | 240 |
GC-57s2 | 12.5/15.0 | 2 | 40 | 65.8/88.0 | 300 |
GC-65ss | 15.0/20.0 | 3 | 40 | 99.0/132.0 | 600 |
GC-65S.0 | 30.0/40.0 | 3+3 | 40 | 198.0/264.0 | 450 |
Specifications
H.P. | Frame | A | B | C | D | E | F | G | H | J | K | L | M | X |
0.25 | 80 | 80 | 140 | 158 | 155 | 165 | 80 | 95 | 70 | 45 | 19 | 22 | 6 | 266 |
0.5 | 80 | 80 | 140 | 158 | 155 | 165 | 87 | 120 | 85 | 45 | 19 | 22 | 6 | 295 |
1 | 80 | 80 | 140 | 158 | 155 | 165 | 122 | 170 | 85 | 45 | 19 | 22 | 6 | 345 |
1 | 112 | 112 | 160 | 213 | 201 | 200 | 80 | 110 | 90 | 60 | 19 | 22 | 6 | 330 |
2 | 112 | 112 | 200 | 213 | 201 | 240 | 110 | 150 | 100 | 60 | 22 | 25 | 6 | 380 |
3 | 112 | 112 | 200 | 213 | 201 | 240 | 152 | 190 | 95 | 60 | 22 | 25 | 6 | 413 |
3 | 132 | 132 | 254 | 264 | 255 | 305 | 126 | 175 | 100 | 70 | 28 | 32 | 8 | 441 |
5 | 132 | 132 | 254 | 264 | 255 | 305 | 174 | 215 | 100 | 70 | 28 | 32 | 8 | 480 |
5 | 160 | 160 | 254 | 316 | 309 | 320 | 124 | 160 | 138 | 96 | 38 | 43 | 10 | 510 |
7.5/10 | 160 | 160 | 254 | 316 | 309 | 320 | 134 | 170 | 147 | 96 | 38 | 43 | 10 | 525 |
15 | 160 | 160 | 254 | 316 | 309 | 320 | 173 | 220 | 142 | 96 | 38 | 43 | 10 | 610 |
25 | 160 | 160 | 254 | 316 | 309 | 320 | 235 | 280 | 165 | 96 | 38 | 43 | 10 | 660 |
Technical Specifications
Voltage | 415 V +- 6% |
---|---|
Frequency | 50 Hz +- 3% |
Duty | S1 , S2 ,.. Upto S8 |
Class of Insulation | B,F, class avail of request |
Enclose | T.E.F.C. |
Ambient Temp. | 40oC |
Technical Specifications
Size of burner | Lap - 00 | Lap - 0 | Lap -1 | Lap - 2 | Lap - 4 |
---|---|---|---|---|---|
Oil Consumption in Liter / hrs | 2-6.5 | 4-11 | 6-28 | 21-57 | 32-110 |
Oil connection | ¾ BsP | ¾ Bsp | ¾ Bsp | 1¼ Bsp | 1¼ Bsp |
Air connection | 1 Bsp | ½ Bsp | 2 Bsp | 3 Bsp | 4 Bsp |
Hp of Blowers (min) | 1 | 2 | 3 | 5 | 7.5 |
Blower capacity M(min) | 5 | 12 | 15 | 17 | 26 |
Total Pressure in mm WG (min) | 450 | 450 | 500 | 600 | 600 |
oil presheater | 1 kw | 2kw | 3kw | 4.5kw | 6kw |
Specifications
Capacity | 750 M3/Hr |
---|---|
Temp | 25oC |
TDH | 140 MLC |
Working Pres. | 40 Bars |
Specifications
Capacity in Tonnes | Tested load in Tonnes | Standard Lift in Mtr. | Dia of load chain in MM | Number of ladd chain falts | Effort of full load kgs. | Chain ratio hand chain to load Chain (mm) | Net Wt. With 3 mtr.lift kgs. | Extra wt.per additional mtr. Lift |
---|---|---|---|---|---|---|---|---|
1 | 1.5 | 3 | 8 | 1 | 26 | 52 | 22 | 3 |
2 | 3 | 3 | 8 | 2 | 28 | 104 | 35 | 4.4 |
3 | 4.5 | 3 | 8/9 | 2 | 30 | 144 | 58 | 4.8 |
5 | 7.5 | 3 | 9/10 | 2 | 49 | 144 | 75 | 5.6 |
7.5 | 11.25 | 3 | 10/12 | 3 | 53 | 216 | 120 | 10.6 |
10 | 15 | 3 | 10/12 | 4 | 57 | 288 | 160 | 13.6 |