Swastik Enterprises

Kasba, Pune, Maharashtra

• 20, 000/2, 000 Counts Dual Display

• Test Frequency : 100/120Hz/1/10/100kHz

• Auto LCR Mode for DUT Measuring

• 0.2% Basic Accuracy

• Measurement Parameter : L, C, R, D, Q, ESR, , DCR

• Parallel/Series Testing Mode

• Sorting Mode for Quality Control

• 2Wire or 5Wire Measurement Available

• Main Display: 20, 000/2, 000 counts selectable

• Sub Display: 2, 000 counts

• Range: 20uH 20kH depends on the selected test frequency

• Best Accuracy: +(0.2% rdg + 2 digits)

• Resolution: 0.001uH 0.001kH depends on selected range

• Range: 20pF 20mF depends on the selected test frequency

• Best Accuracy: +(0.2% rdg + 2 digits)

• Knife edge pointer

• Glass filled polycarbonate housing

• Easily replaceable glass and bezel

• Easy installation with swivel screws

• Pointer: Knife - edge pointer

• Pointer Deflection: 0 to 90)

• Case details: Moulded square case suitable for mounting in Control/Switchgear panels, Machinery consoles.

• 7 segment LED Display

• Site Programmable CT & PT Ratio

• True RMS Measurement

• Password protection

• Maximum Demand with relay contact

• Harmonic measurement (total and individual)

• Autoranging

• Universal auxiliary supply

Quickly take accurate humidity and temperature readings in the air. Temperature and humidity are two important factors in maintaining optional levels and good indoor air quality. The Fluke 971 is invaluable for facility maintenance and utility techniques.

• Measures dew point and wet bulb

• 99 record storage capacity

• Min/Max /Avg Data Hold

• Twist- open protective cap

• Low Battery indicator

The Amprobe LM-100 light meter measures the visible light from fluorescent, metal halide, high-pressure sodium or incandescent sources. It is a portable, easy-to-use digital light meter designed for simple one-hand operation reading in Lumen (lux) or footcandle (fc) units. The LM-100 measures a wide range of light up to 20, 000 fc or lux with an accurate, high resolution of 0.01 fc/lux.

• Measure in Lux or Footcandles, front panel switchable

• Measuring Range to 200000 Lux or 20000 Foot candles

• Silicon photodiode sensor and filter

• MAX ability to show high readings

• Includes protective sensor cap

• Large, 3-1/2 digit display

• Available in 96x96 and 96x48 sizes

• 1 Line of 4 digits LED Display

• Site Programmable CT & PT Ratio

• True RMS Measurement

• Password Protection:

• Harmonic Measurement (Total & Individual) for Voltage

• RS485 Computer Interface

• Auto ranging

• Universal Auxiliary

• Display: 4 digits 7 segment LED display of 1 row

• Digit: 4

• Digit Height: 0.56

• Display Scrolling: Automatic/ Manual

• Electrical Connection: 1-2 wire

• Input Voltage Range: 0-500 V AC (L-L)

• Auxiliary supply: 90-270 V AC/DC

• P.T. Ratio: Up to 132 kV

• Temperature(Operating): 10 deg to 55 deg C

The ultimate component checker measures inductance, capacitance, resistance, transistors, diodes and microwave diodes

• State of Art Micro controller Based Design

• 1 Line 4 Digit ultra bright LED display

• Site Programmable CT & PT Ratio

• True RMS measurement

• Total harmonic measurement for voltage

• Auto ranging

• Universal Auxiliary supply

• Aux. Supply: 90-27V AC/DC (15%)

• Frequency: 50/60 Hz

• Display: 4 digit 7 segment LED display of 1 raw

• Digit Height:0.56" (14.3mm)

• Display ScrollingFixed : Voltage Variable : Current, THDI & Frequency

• Dimension: 96 x 96mmDepth ( behind bezzel ) : 55 mmPanel Cut out : 92 X 92 mm

The Amprobe SM-10 Sound Level Meter is designed to meet the measurement requirements of Safety Engineers, Health, Industrial safety offices and Quality Control in various environments. It offers two types of measurements: A and C weighting.The A weighting is for general noise sound level and the C weighting is for measuring sound level of acoustic material control in various environments (ie 94dB 1 kHz etc.). The SM-10 conforms to the IEC651 Type 2, ANSI S1.4 Type 2, and JISC1502 requirements for Sound Level Meters. Which means the SM-10 uses two different weighting filters required by the IEC 651 and ANSI S1.4 Type 2: the A-Weighting and the C-Weighting audio filtering.

• Designed to meet the measurement requirements of Safety Engineers, Health, Industrial safety offices and quality control in various environments.

• A and C weightings for checking compliance with safety regulations as well as acoustic analysis

• Measuring ranges:A Weighting 30 130dBC Weighting 35130dB

• Display with 0.1dB steps on a 4 digits LCD

• Slow (1 sec) and fast (125ms) response settings to check peak and average noise levels

• Accessories supplied: Carrying case, windscreen, user manual and 9V Battery

• High-accuracy, Digital reading

• Large LCD for easy reading

• Instant continuity buzzer

• Overload protection on all ranges

• Recessed safety designed input jacks

• Data Hold switch freezes reading

• Low battery indication

• Tough ABS plastic housing

• Diode check

• 3 digits Display.

• Resolution 0.1 dB.

• MAX/MIN Hold Function.

• AC/DC Signal output.

• Time Weighting : Fast, Slow

• RS-232 interface, 14000 Records Data logger

• Low battery indication.

• Applicable standards : IEC 651 Type II.

• Model No.:KM 928 MK-1

• Brand: Kusam Meco

• Warranty:1 Year

• In the box:1 x Kusam Meco KM 928 MK-1 Digital Sound Level Meter

• Critical thickness of metallic base: 1mm.

• Sound Meter Type: Digital Sound Meter