| A)For Non-Magnetic Coatings On Magnetic Base :1) Digital Meter For Coatings On MS2) Coatmeasure- M2s , Range: 2000 Microns 3) Coatmeasure - M6s, Range : 6MM 4)Coatmeasure - M12s , Range : 12MM | | Digital Coating Thickness Gauge B) For Non-Conductive Coatings On Conductive BaseDigital Meter For Anodising and Coatings On AI & Brass :1) Coatmeasure-C2s , Range : 2000 Microns, 0 To 20 (0.1) & 20 To 2, 000 (1) Micron2) Coatmeasure-C4s, Range : 4000 Microns | | C) For both Ferrous & Non-Ferrous bases :Coatmeasure - ( M & C )2s, Range : 0-2000 Microns | | |
- COATMETER : Dial Type Fixed Probe Gauge Spot Calibrationon nearest Testfoil for better accuracy Range :a) 100, 200, 300, 600 Micron ( Any One )b) 1, 3, 6, 0.5-9 MM ( Any One )
| |
- Coating Thickness Gauge - COATGAUGE : Pen Type Pull-Off Gauge, Also reads in Thou and on equally divided scale, 0-600 Microns
| |
- Coatest AA Make Made In India Pull-Off Type (For Vertical Use Only) 0 To 250 Micron Or 50 To 800 Micron (Any) 1815 Picture code
| |
- Thickness Gauge (Throat Depth 40 mm)a) Dial Type Resolution : 0.01 - Range : 0-10 mm, Resolution : 0.01 - Range : 0-25 mm, Resolution : 0.001 - Range : 0-1 mmb) Digimatic (Digital Type) Acc : 0.01 - Range : 0-12 mm, Acc : 0.01 - Range : 0-25 mm, Acc : 0.001 - Range : 0-1 mm
| |
- Digital Coating Thickness Meter, Model : CM-8821 (Micro Computer Based)Range : 0 to 2, 000um ( F Type= Non Magnetic Coatong on Magnetic Material )For Measuring The Thickness Of Any Non Magnetic Material (Paint Plastic Porcelain Enamel Copper Zinc Aluminium Chrome Etc) On Magnetic Bases (Iron Nickel Etc) Like Plating Layer Lacqure Layer Porcelain Enamel Layer Phosphide layer CopperAluminium & Paper
| |
- Model CM - 8823, ( NF Type = Non Magnetic Coating On Mon Magnetic Material ) Range: 0-1000 Microns/0-40mil
| |
- Model CM-8825 Fnf (Micro Computer Based) Ferrous & Non Ferrous Combined ( 2 in 1, F & NF type )Range : 0 To 200um/500um/1000um/2000um Data Output Rs-232 Interface
| |
- Model TM-8810 (Micro Computer Based)Range : 0 to 200um Thickness Meter, Microcomputer based, Ultrasonic, For Measuring The Thickness Of Steel Cast Iorn Aluminium Red Copper Brass Zinc Quartz Glass Polyethylene Pvc Gray Cast Iron
| |
- Model TM - 8811 , Same as above but with sound velocity 2000-8000 m/s Model : TM - 8812 (micro Computer Based)Range : 1.2 to 225 mm / 0.05 to 9 inch RS-232 Interface, with sound Velocity : 2000 - 8000 m/s
| |
- SHORE A HARDNESS TESTERa) Indian b) Japan
| |
- DIGITAL SHORE A HARDNESS TESTER, Model No.6510 A, 4 Digit-10mm LCD Display, ImportedRange : 1090H, Resolution : 0.1, Test Specimen Min 6 mm Thick, Auto Off, Power Supply : 4 x 1.5V AA (UM-3) BatteryTo Measure the Hardness of : Rubber, Elastomers, Silicon Substances, Soft Plastic, Felt, Leather
| |
- DIGITAL SHORE D HARDNESS TESTER, Model No.6510 D, 4 Digit-10mm LCD Display, ImportedRange : 1090H, Resolution : 0.1, Test Specimen Min 3 mm Thick, Auto Off, Power Supply : 4 x 1.5V AA (UM-3) BatteryTo Measure the Hardness of : Plastics, Formica, Plexiglass, etc
| |
- SHORE D HARDNESS TESTER INDIAN
| |
- Surface Roughness Tester, Model No.SRT-6210, . 4 Digit-10mm LCD Display, with blue / Black Light ImportedSensor : Inducutance Type, Radus of Probe Pin : 5, Material of Probe Pin : DiamondParameters : Ra, Rq, Rz, Rt. Measuring Range : Ra, Rq : 0.005 16.00um / 0.020 629.9uinch, Rz, Rt : 0.020 160.0um / 0.078 6299uinch
| |
- Digital VACCUM GAUGE, Range : 25-0 Microns Model TPI-605
| |
- Digital VACCUM GAUGE, Range : 25-0 Microns Model TPI-606
| |
- Digital Electronic Thickness Guage Mitu-Toyo JapanModel : 700-110sue Range : 0-12mm/0.01mm, 700-122sue Range : 0-25mm/0.01mm
| |
- Wet Film Thickness Gauge (upto 0.004") Circular Type
| |
- Dry Film Thickness Gauge (Dial Indicator Type)
|
Write a Review
SWASTIK SCIENTIFIC COMPANY (SWASTIK SCIENTIFIC COMPANY)
133, Gopal Niwas, 2nd Floor, Room No.2,
Princess Street, -400 002. () , Kalbadevi, Mumbai, Maharashtra
Share us via
