Sirsa, Haryana, India
Verified
Add Review
Our Products
BNC RF connectors are the most popular coaxial connector. The special bayonet design allows easy mating and unmating. BNC 50 ohm connectors provide repeatable electronic performances from DC to 4 GHz. BNC 75 ohm connectors are suitable for applications up to 1 GHz. All 50 and 75 ohm connectors are intermatable. BNC type connectors are designed to accommodate a large variety of RG and industry standard cables.
They are available in crimp, clamp, and twist on cable styles. A full line of printed circuit board receptacles, bulkhead receptacles, and other accessories complement the product offering. The BNC series coaxial connector works well in lower microwave frequency applications including monitors, LAN, telecommunication devices and test equipment.
| BNC Electrical Ratings :- | ||
|---|---|---|
| Impedance | 50 ohm | 75 ohm |
| Frequency Range | DC to 4 GHz | DC to 1 GHz |
| VSWR | Straight | Right Angle |
| Voltage Rating (at sea level, in R rms,50Hz) | 500 max | |
| Dielectric Withstanding Voltage(at sea level, in R rms,50Hz) | 1500 | |
| Insulation Resistance | 5000 M min | |
| Insertion Loss | 0.2 dB max @ 3.0 GHz | |
| Contact Resistance | Center Contact | Outer Contact |
| 2.0 m max | 2.0 m max | |
| Materials :- | Material | Plating | |
|---|---|---|---|
| Connector Body | Brass per QQ-B-626 | Nickel | |
| Center Contact | Male | Brass per QQ-B-626 | Gold |
| Female | Beryllium Copper per QQ-C-530 | Gold | |
| Insulator | Teflon, Delrin, Polypropylene | None | |
| Gasket | Silicone Rubber | None | |
| Crimp Ferrule | Annealed Copper per WW-T-799 | Same as body | |
SMA connectors, short for Subminiature Version A, are semi-precision, subminiature devices that provide repeatable electrical performance from DC to 12.4 GHz with flexible cable. SMA connectors feature screw-type coupling. Semi-Rigid cabling extends the frequency range of the device to 18GHz.
SMA connectors offer broadband performance with low reflections and constant 50 ohm impedance. These properties, along with minimum attenuation and low VSWR have made the SMA connector extremely popular in the microwave community.
| SMA Electrical Ratings :- | Straight Connectors | Right Angle Connectors |
|---|---|---|
| Impedance | 50 ohm | |
| RF Leakage | -90 dB @ 2-3 GHz | |
| Insulation Resistance | 5000 Mmin | |
| Contact Resistance | Center Contact | Outer Contact |
| 3.0 m max | 2.0 m max | |
| Straight Connectors | Right Angle Connectors | |
| Insertion Loss | .04 dB max x w f GHz | .06 dB max x w f GHz |
| Materials :- | Material | Plating | |
|---|---|---|---|
| Connector Body | Brass per QQ-B-626 | Gold/Nickel | |
| Center Contact | Male | Brass per QQ-B-626 | Gold |
| Female | Beryllium Copper per QQ-C-530 | Gold | |
| Insulator | Teflon | None | |
| Gasket | Silicone Rubber | None | |
| Crimp Ferrule | Annealed Copper per WW-T-799 | Same as body | |
We are one of the highly accepted business unit engaged in industrialized and supplying high excellence Brass Inserts.
The range is known for durability and high strength. We have many kinds of molding insert developed and always keenly look for new development to add in our product range.
Special Features
Additional Information:
Packaging Details : As per customers specification or standard export packaging.
As per Specifications or custom designs
Finish and CoatingNatural, Nickel Plated, Tin Plated, Gold plated, silver plated, chrome plated or any coating as per customer specification.
Additional Information:
Packaging Details : As per customers specification or standard export packaging.
TNC RF connectors are basically BNC connectors with threaded coupling and improved electrical performance at higher frequencies. TNC 50 ohm connectors provide repeatable electronic performance from DC to 11 GHz. TNC 75 ohm connectors are suitable for applications upto 1 GHz. All 50 and 75 ohm connectors are intermatable. TNC connectors are designed to accomodate cables from .150" to .250 OD.
The TNC type connector is a weatherproof unit and with its threaded coupling ensures low noise and withstands shock and vibration. Typical TNC series coaxial connector applications include airframe, missile, radar, cellular mobile phones, and precision electronic equipment industries.
| Electrical Ratings :- | ||
|---|---|---|
| Impedance | 50 ohm | 75 ohm |
| Frequency Range | DC-11 GHz | DC-1 GHz |
| VSWR | 1.3 max | |
| Voltage Rating (in VRMS at sea level) | 500 max | |
| Dielectric Withstanding Voltage (in VRMS at sea level) | 1500 min | |
| Insertion Loss | 0.2 dB max @ 3.0 GHz | |
| Insulation Resistance | 5000 M min | |
| Contact Resistance | Center Contact | Outer Contact |
| 2.0 m max | 1.0 m max | |
| Materials :- | Material | Plating | |
|---|---|---|---|
| Connector Body | Brass per QQ-B-626 | Nickel | |
| Center Contact | Male | Brass per QQ-B-626 | Gold |
| Female | Beryllium Copper per QQ-C-530 | Gold | |
| Insulator | Teflon, Delrin, Polypropylene | None | |
| Gasket | Silicone Rubber | None | |
| CrimpFerrule | Annealed Copper per WW-T-799 | Same as body | |
Mini-UHF series connectors are designed for use in applications from DC to 2.5 GHz where size, weight and cost elements are crucial. This miniature 3/8"-24 thread size connectors provide excellent RF performance and are impedance matched to 50 ohm cable. Crimp type cable plugs and jacks are available as well as panel and printed circuit board receptacles.
Mini-UHF connectors combine excellent electrical characteristics, small size and light weight at a relatively inexpensive cost for many coaxial connector applications. Some of these include cellular mobile telephones, low cost local area networks, and telecommunications.
| MINI-UHF Electrical Ratings :- | 50 ohm | 75ohm |
|---|---|---|
| Impedance | 50 ohm | |
| Frequency Range | 0-2.5 GHz | |
| VSWR | 1.25 max | |
| Voltage Rating (in VRMS at sea level) | 335 max | |
| Dielectric Withstanding Voltage (in VRMS at sea level) | 1000 min | |
| RF Leakage | -55 dB min @ 2.5 GHz | |
| Insertion Loss | .2 dB max @ 2.5 GHz | |
| Insulation Resistance | 5000 MW min | |
| Contact Resistance | Center Contact | Outer Contact |
| 1.5 mW max | 1.0 mW max |
| Materials :- | Material | Plating | |
|---|---|---|---|
| Connector Body | Brass per QQ-B-626 | Nickel | |
| Center Contact | Male | Brass per QQ-B-626 | Gold |
| Female | Beryllium Copper per QQ-C-530, or Phosphor Bronze per QQ-C-750 |
Gold | |
| Insulator | Teflon, Delrin, Polypropylene | None | |
| Crimp Ferrule | Annealed Copper per WW-T-799 | Same as body | |
N series RF connectors are 50 ohm constant impedance connectors with a consistently low VSWR across its frequency range of 0 to 11GHz. They are high quality medium size connector standard used with coaxial cables from .350" to .450" OD, but designs can also accommodate .078" to .875" cables.
N type connectors are threaded and gasketed for weatherproof operation. The threaded coupling incurs low noise and withstands shock and vibration. They are not matable with the 50 ohm connectors. The N series connector is the most popular medium sized connector. Applications include test and measurement, antennae, base stations, transmitters, etc.
| Type-N Electrical Ratings :- | ||
|---|---|---|
| Impedance | 50 ohm | 75 ohm |
| Frequency Range | 0-11 GHz | 0-1.5 GHz |
| VSWR | 1.3 max @ 11 GHz | |
| Voltage Rating (in VRMS at sea level) | 1000 max | |
| Dielectric Withstanding Voltage (in VRMS at sea level) | 2500 min | |
| Insertion Loss | .15 dB max @ 10 GHz | |
| Insulation Resistance | 5000 M min | |
| Contact Resistance | Center Contact | Outer Contact |
| 1.0 m max | 1.0 m max |
| Materials :- | Material | Plating | |
|---|---|---|---|
| Connector Body | Brass per QQ-B-626 | Nickel | |
| Center Contact | Male | Brass per QQ-B-626 | Gold |
| Female | Beryllium Copper per QQ-C-530 | Gold | |
| Insulator | Teflon, Delrin, Polypropylene | None | |
| Gasket | Silicone Rubber | None | |
| Crimp Ferrule | Annealed Copper per WW-T-799 | Same as body | |
