Swiss Superfinishing Technologies Gurugram, Haryana

We are offering rod polishing machines. Polishing machine can achieve matt satin hair line high gloss finish with emery flap wheels, jute wheels & buffing wheels on stainless steel brass ms tubes rods etc. it is also possible to polish solid rods of ferrous and non ferrous material.the machine is fabricated structure, robust and sturdy design. Main spindle is designed for high rpm with special bearings and has facility to adjust according to diameter. The control wheel is mounted on a reduction gear box and has helix angle setting arrangement for controlling the speed of component. special flap wheels and non -woven wheels can facilitate satin finish on brass and copper. Manual conveyor with jack system is suitable to polish tube of 6 meter length. technical specifications range :10mm to 150mm or 60mm to 300 main motor :5 h.p gear box motor :1 h.p flap wheel :350mm*50mm*181mm floor space :1300(l)*1575(w)*1575(h)

We are offering lancer type tube polishing machine (welding joint remover). technical breif :machine available in width – 100mm 150mm finishes : hairline, no.4, scrotch brite, matt. minimum diameter – 10mm, max diameter – 100mm polishing belt size: 100mm x 2000 mm, 150 x 2000mm this machine is available in two three stations. with special modification in machine – the machine can be used in dual mode i.e. With abrasive belt and also with emery flap wheel. In fact lancer machine is very useful to remove welding joint of pipe (sim). Pipes, which have lot of scratches of deep dents, can be aggressively polished by lancer belt. In case of 3 stations or 6-station machine it is recommended to install lancer head on first station.

We are offering oscillation type square pipe polishing machine, oscillation type flat polishing machine etc. Finish achieved :mirror, matt, super matt, hair line finish flap emery wheels, scrotch brite wheels, buffing wheels can be mounted on this machine. This is universal machine and can do polishing on flats, square pipes and sheets as well. this machine can be used to polish and buff aluminium sections (used for anodizing), ferrous and non - ferrous material. Since the table is 10” wide, you can mount many square rectangular pipes at a time for polishing purpose. technical specifications: electricals : main motor -7.5 hp with ac frequency drive conveyor motor -2 hp with ac frequency drive + gear box oscillation motor -1 hp + gear box traverse motor - 0.5 hp + gear box with inching facility control panel - in auto mode + manual mod conveyor table : • table width : 250mm ( 10”) • table length : 5100mm (5meters) • machine length : 10200mm ( 10meters) • maximum component height : 100mm (4”) • maximum component length : 5000mm • minimum component length : 100mm the conveyor table is reciprocating type and the reciprocation length can be set by adjusting limit switches. Reciprocation speed can be varied by ac frequency controller. Excellent clamping fixtures are provided to clamp squarerectangular pipe sections in rapid mode.

We are offering six station tube polishing machine. Six station pipe polishing machine is an appropriate machine for mass production based industries.

We are offering flat surface polishing machine. Flat polishing machine can perform any polishing operation on any flat surface like square rectangular tube, solid flat, sheet metal component. It also dibbers all the component having burrs on the surface. two station & three station flat polishing machines are also available for achieving fine finish in one pass. technical details:- component size – 150mm(w) * 50mm(h) conveyor speed – max 6 mtrsmin main motor – 7.5h.p gear motor – 0.5h.p overall dimensions – 1950mm(l)*1200mm(w)*1860mm(h) approx weight – 2100 kgs.

We are offering three in one polishing machine. 3 in 1 polishing machine (notching, flat and round pipe polishing) earlier day’s fabricator needed 3 machines for round, flat and for notching and it’s expensive to buy 3 machines. Looking to today economical recession we have developed 3 in 1 machine with a very competitive price to suit fabricator. it’s possible to do polish flat parts like square rectangular square pipes to matt and no.4 finish also possible to polish grind round pipes as well do notching on round pipes. Apart from this we propose to impart complete training to your operator for maintenance; operating and servicing of machine at our works. You may view our machine videos on you tube under “ swiss superfinishing polishing machines” 3 in 1- notching, flat, round pipe polishing machine notching parameters s.no technical parameters model sw 120 1 abrasive belt dimension (mm) 150 x 2000 2 max dia for notching (mm) 12 - 120 2 notching rollers (standard) 1" 3 belt speed (mtrs sec) 30 4 belt motor power 3 hp 5 conveyor motor power 0.5 hp 6 coolant motor power 0.25 hp round pipe polishing parameters 1 control wheel motor power 0.5 hp 2 control wheel diameter (mm) 200 flat polishing parameters 1 working width (mm) 150 2 working height (mm) 75 3 machine dimension 500 x 1700 4 weight (kg) 1200