Post Buy Requirement

Process Control Systems & Equipment #105931

Automatic Power Factor Controller

We are offering automatic power factor controller.
Certain elctricals loads such as motors found in heavy machinneries , can cause the electrical system to be highly inductive. This result in poor power factor . Poor power factor means higher energy losses which ultimately get converted into large electricity chrges.

A simple solution to this problem is to balance this inductive load with equivalent capacitive load . Tis is achieved by connecting or disconnecting the capacitors to or from the system. Manual switching of these capacitors is not possible in case of rapidly fluctuating loads . So even in an environment of rapidly fluctuating loads to achieve the required power factor one may need an automatic power factor control device, called automatic power factor controller, to connect and disconnect these capacitors.

Sycon 66 xx e3 controller is an automatic power factor controller used to control the power factor of the system . It can sense the powre factor of each individual phase in the three phase system and can switch the capacitors according to the requirement.
View Complete Details

Sycon-66 Xx - Automatic Power Factor Controller

This version of 66 XX series displays all parameters such as power factor, shortfall KVAR Excess KVAR , voltage, current and THD all at a time. By selection, it displays % harmonic from 3rd to 13th and capacitor values. It has built in facility to cut-off the capacitors in case of harmonic overload. It has password protected settings. Its built-in TEST mode enables to test the panel without CT current. Auto as well as Manual mode of operation are available in this relay.
View Complete Details

Sycon-66 Xx Ss - Automatic Power Factor Controller

We offer Sycon-66 Xx Ss - Automatic Power Factor Controller.
This advance version in 66 series with small volume and light weight, displays all parameters like system power factor voltage, current, system KVA, system KVAr, system KW, shortfall KVAr, THD. It works on smart switching algorithm where a number of capacitors can be turned ON or OFF instantaneously used on the capacitive KVAr requirement. It also displays harmonics from 3rd to 13th. It has capability to auto-identify the capacitor values. All the settings are password protected. It has in-built capacitor protection system in case of harmonic overload and over-voltage. With in-built TEST mode, the panel can be tested without CT curre
View Complete Details

SYCON-55 XX - Automatic Power Factor Controller

We offer SYCON-55 XX - Automatic Power Factor Controller.
This 55 series version uses microcontroller technology but with necessary and sufficient features. The main feature is two point setting to avoid hunting at site by user convenience which eliminates calculations and setting of CK. The switching sequence is in "First In First Out" i.e. FIFO manner. It is very easy to install and its bright 4-digit 7-segment display makes it readable from dis
View Complete Details

Sycon-55 Xx-2d - Automatic Power Factor Controller

We are offering sycon-55 xx-2d - automatic power factor controller.
This 55 series version is similar to sycon 55 series model of apfc in all respects except the display, the price and the size of the controller. It uses 2-digit 7-segment bright display for power factor indication. Two separate leds are used to give leadlag indication. It is smaller and lighter in weight than the regular sycon 55 series model. This low cost version is very popular for smaller automatic power factor correction systems.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Mr G S Patwardhan,Mr Vinayak Patwardhan Mr G S P (Systems and Controls (sangli ) Pvt. Ltd.)
  • C-24, Midc Miraj, Sangli, MH - 416410, India
  • Share us via
  • Call 08069247317 Ext. 970
Retailer of Process Control Systems & Equipment from Sangli, MH by Systems and Controls (sangli ) Pvt. Ltd.
Post Buy Requirement

Process Control Systems & Equipment #105931

Automatic Power Factor Controller

We are offering automatic power factor controller.Certain elctricals loads such as motors found in heavy machinneries , can cause the electrical system to be highly inductive. This result in poor power factor . Poor power factor means higher energy losses which ultimately get converted into large electricity chrges. A simple solution to this problem is to balance this inductive load with equivalent capacitive load . Tis is achieved by connecting or disconnecting the capacitors to or from the system. Manual switching of these capacitors is not possible in case of rapidly fluctuating loads . So even in an environment of rapidly fluctuating loads to achieve the required power factor one may need an automatic power factor control device, called automatic power factor controller, to connect and disconnect these capacitors. Sycon 66 xx e3 controller is an automatic power factor controller used to control the power factor of the system . It can sense the powre factor of each individual phase in the three phase system and can switch the capacitors according to the requirement.
View Complete Details

Sycon-66 Xx - Automatic Power Factor Controller

This version of 66 XX series displays all parameters such as power factor, shortfall KVAR Excess KVAR , voltage, current and THD all at a time. By selection, it displays % harmonic from 3rd to 13th and capacitor values. It has built in facility to cut-off the capacitors in case of harmonic overload. It has password protected settings. Its built-in TEST mode enables to test the panel without CT current. Auto as well as Manual mode of operation are available in this relay.
View Complete Details

Sycon-66 Xx Ss - Automatic Power Factor Controller

We offer Sycon-66 Xx Ss - Automatic Power Factor Controller.This advance version in 66 series with small volume and light weight, displays all parameters like system power factor voltage, current, system KVA, system KVAr, system KW, shortfall KVAr, THD. It works on smart switching algorithm where a number of capacitors can be turned ON or OFF instantaneously used on the capacitive KVAr requirement. It also displays harmonics from 3rd to 13th. It has capability to auto-identify the capacitor values. All the settings are password protected. It has in-built capacitor protection system in case of harmonic overload and over-voltage. With in-built TEST mode, the panel can be tested without CT curre
View Complete Details

SYCON-55 XX - Automatic Power Factor Controller

We offer SYCON-55 XX - Automatic Power Factor Controller.This 55 series version uses microcontroller technology but with necessary and sufficient features. The main feature is two point setting to avoid hunting at site by user convenience which eliminates calculations and setting of CK. The switching sequence is in "First In First Out" i.e. FIFO manner. It is very easy to install and its bright 4-digit 7-segment display makes it readable from dis
View Complete Details

Sycon-55 Xx-2d - Automatic Power Factor Controller

We are offering sycon-55 xx-2d - automatic power factor controller.This 55 series version is similar to sycon 55 series model of apfc in all respects except the display, the price and the size of the controller. It uses 2-digit 7-segment bright display for power factor indication. Two separate leds are used to give leadlag indication. It is smaller and lighter in weight than the regular sycon 55 series model. This low cost version is very popular for smaller automatic power factor correction systems.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us