With its uniform high electrical conductivity Taalay Copper Rod ensures the highest possible efficiency in converting and transmitting electrical power. Whether as a conductor in underground and submarine cables or as enameled wire in transformers, generators and motors: its uniform high quality and purity mean that our rod is much sought after for these demanding applications. At the same time, excellent fine drawing properties, the uniform recrystallization behavior and the surface structure of our rod, which is particularly important to the makers of enameled wire, considerably simplify further processing by our customers.

In signal transmission and electronics, too, the very good physical and chemical properties of our products are extremely useful in assisting in continued miniaturization and weight reduction while maintaining the utmost reliability.

Taalay Profiles are the ideal starting point for manufacturing high-quality forgings, strips, bars, segments and profiles made of copper.

Their uniformly high quality and precisely adjusted chemical composition mean that our shapes are much sought after for demanding applications in particular.

Typical end uses for the further processing of our shapes include cable strips with top demands regarding welding suitability and surface, casting moulds and lead frames.

Customer requirements and specifications are particularly important to us, so as facilitate further processing and ensure the best possible functionality.

Copper tapes (supplied in coils), are also available in High Conductivity Electronic Tough Pitch material with an electrical conductivity of approximately 101% IACS. They are manufactured to BS 1432, EN 13601, or other international equivalent standards depending on width / thickness ratio.

• CONDUCTOR SIZE

10-75 mm. width, 2.0-5.0 mm. thicknes

• STANDARD COIL SIZE

ID 300 mm. minimum OD 1, 000 mm. maximum Length upon agreement

• TEMPER

Annealed / Soft grade

• APPLICATIONS

Earthing

Taalay Metallics is manufacturing a new range of electrical wires known as PVC/FRLS/HR Insulated Single/Multi core cables, which provides additional safety and security. The wires bear the mark of IS: 694: 1990.

Each wire is fabricated using 99.97% pure, electrolytic grade, bright-annealed bare copper with more than 100% conductivity. Copper guarantees higher percentage of electrical energy saving which eventually helps in reducing the electricity bills. The conductor is made of multiple strands of finely drawn copper wires thereby offering greater flexibility, which makes these wires ideal for conduit wiring.

This FR PVC compound has a high oxygen and temperature index. The wires are wadded with a flame retardant (FR) PVC compound, which helps to control the spread of fire even at very high temperature. It also protects against electrical shock and short circuit. All wires are subjected to high voltage spark testing to ensure that no weak spots are there in the insulation.

We have established ourselves as a renowned manufacturer, supplier, wholesaler and exporter of an extensive assortment of Solid Copper Earthing Rod.

Solid copper earth rods / Ground rod is made from 99.9% pure electrolytic copper. Solid copper rods offer greater resistance to corrosion. They are ideally used in applications where soil conditions are very aggressive.

Solid copper earth rods are of two types. Externally threaded and internally threaded. Solid Copper earth rods are used where the factor of corrosion is very high and exceptionally long life is required.

• ASTM B 133 & ASTM B 187.
• Solid copper ground electrodes are used when better conductivity and corrosion resistance is preferred.
• Due to softness of solid copper, care must be taken when driving electrode.

With its uniform high electrical conductivity Taalay Copper Rod ensures the highest possible efficiency in converting and transmitting electrical power. Whether as a conductor in underground and submarine cables or as enameled wire in transformers, generators and motors: its uniform high quality and purity mean that our rod is much sought after for these demanding applications. At the same time, excellent fine drawing properties, the uniform recrystallization behavior and the surface structure of our rod, which is particularly important to the makers of enameled wire, considerably simplify further processing by our customers.

In signal transmission and electronics, too, the very good physical and chemical properties of our products are extremely useful in assisting in continued miniaturization and weight reduction while maintaining the utmost reliability.

Taalay Profiles are the ideal starting point for manufacturing high-quality forgings, strips, bars, segments and profiles made of copper.

Their uniformly high quality and precisely adjusted chemical composition mean that our shapes are much sought after for demanding applications in particular.

Typical end uses for the further processing of our shapes include cable strips with top demands regarding welding suitability and surface, casting moulds and lead frames.

Customer requirements and specifications are particularly important to us, so as facilitate further processing and ensure the best possible functionality.

Copper tapes (supplied in coils), are also available in High Conductivity Electronic Tough Pitch material with an electrical conductivity of approximately 101% IACS. They are manufactured to BS 1432, EN 13601, or other international equivalent standards depending on width / thickness ratio.

• CONDUCTOR SIZE

10-75 mm. width, 2.0-5.0 mm. thicknes

• STANDARD COIL SIZE

ID 300 mm. minimum OD 1, 000 mm. maximum Length upon agreement

• TEMPER

Annealed / Soft grade

• APPLICATIONS

Earthing

Taalay Metallics is manufacturing a new range of electrical wires known as PVC/FRLS/HR Insulated Single/Multi core cables, which provides additional safety and security. The wires bear the mark of IS: 694: 1990.

Each wire is fabricated using 99.97% pure, electrolytic grade, bright-annealed bare copper with more than 100% conductivity. Copper guarantees higher percentage of electrical energy saving which eventually helps in reducing the electricity bills. The conductor is made of multiple strands of finely drawn copper wires thereby offering greater flexibility, which makes these wires ideal for conduit wiring.

This FR PVC compound has a high oxygen and temperature index. The wires are wadded with a flame retardant (FR) PVC compound, which helps to control the spread of fire even at very high temperature. It also protects against electrical shock and short circuit. All wires are subjected to high voltage spark testing to ensure that no weak spots are there in the insulation.

We have established ourselves as a renowned manufacturer, supplier, wholesaler and exporter of an extensive assortment of Solid Copper Earthing Rod.

Solid copper earth rods / Ground rod is made from 99.9% pure electrolytic copper. Solid copper rods offer greater resistance to corrosion. They are ideally used in applications where soil conditions are very aggressive.

Solid copper earth rods are of two types. Externally threaded and internally threaded. Solid Copper earth rods are used where the factor of corrosion is very high and exceptionally long life is required.

• ASTM B 133 & ASTM B 187.
• Solid copper ground electrodes are used when better conductivity and corrosion resistance is preferred.
• Due to softness of solid copper, care must be taken when driving electrode.