Post Buy Requirement
Tarang Kinetics
Roorkee, Uttarakhand, India
gstGST : 05AAACT7621B1ZU Verified Add Review

Other Products / Services #1034337

Environmental Chamber

  • Test Environment Simulation As per customer's requirement (Cold, Heat, humidity, altitude, thermal shock)
  • Test space As per customer's requirement
  • Temperature Range -80 C to +200 C
  • Ramp Rate Upto 10 C per min
  • Temperature Uniformity + 1 C (average)
  • Relative Humidity 10% to 98% Rh (20 C to 80 C)
  • Humidity Uniformity + 3%
  • Construction Interior & Exterior Constructed with Stainless Steel / Crc Powder Coated
  • Window Size as per customer's requirement with wiper, illumination, six panes of toughened glass
  • Refrigeration System Air / Water Cooled
  • Refrigerant Used Non CFC
  • Insulation 100-125 mm thick Rockwool / PUF
  • Controller Micro-controller based
  • Port Holes As per Customer's Requirement
  • Power Requirement Three Phase supply with Neutral

Tarang environmental chambers are used to simulate the desired environment such as Cold, Heat, humidity, altitude, thermal shock, solar radiation, salt spray, rain spray, dust & sandetc. as per the customer's requirement. These chambers are available in different ranges of parameters and capacities as per specific testing requirements of the customer. These chambers can be integrated with Vibration shaker systems as well to perform combined environment vibration tests. A walk-in variant is also available for products that require very large capacity & size such as complete automobile, bikes, missiles etc. The Chambers feature various safety interlocks that are necessary to provide a safe environment of operation.

Environmental-Chamber We are incorporating the best engineering practices to develop a Chamber that is capable of performing all types of versatile testing as per international standards for a long life of reliable performance. The design is very good and simple from maintenance point of view. The Chamber Controller is very user friendly and as per the requirement of the customer it can be upgraded to a latest touch screen panel type as well. The controller is capable of remote operation and monitoring as well. It can easily be integrated with any computer to download / upload test profile or data using high speed communication RS 232/485, Ethernet and USB ports. The features of data recording, monitoring and report generation are also available.

Environmental Chamber is a versatile test equipment to carry out environmental tests in accordance with various National & International standards e.g. IS, MIL, EN, ISO, IEC, DEF & ASTM Standards.

Advantages for you
Customizable Reliable Solutions :Key features   

  • Corrosion resistant interior and exterior
  • CFC free operation
  • Aesthetically designed
  • Capable to perform tests in accordance with various standards eg. IS, MIL, DIN, ISO, EN, IEC, DEF, JS55555 & ASTM etc.


Efficient performance: Key features 

  • Accurate control of test parameters
  • Reliable performance
  • Energy efficient
  • Inbuilt Variable frequency drive


User Friendly: Key features

  • Easy to operate
  • Light weight
  • Easy integration with Vibration Test System
View Complete Details

Head Expander

  • Material Metal
  • Color Silver
  • Feature Rust Proof
  • Application Vibration System

Tarang Head expander is an attachment that increases your loading options of your vibration shaker system that enables it to mount larger or multiple test objects. These come in three standard shapes - circular, rectangular and square. Head expander provides a larger surface mounting area for an occasional test object that is bigger in size than the limiting dimensions specified for your shaker system.

Technical Specification

Model THCE-400 THCE-650 THCE-750 THCE-100 THCE-120 THCE-150
Size (mm) Ø400 Ø650 Ø750 Ø1000 Ø1200 Ø1500
Insert Pattern* 50 x 50mm matrix 100x100mm matrix 100x100mm matrix 100x100mm matrix 100x100mm matrix 100x100mm matrix
Weight (Kg) 25 40 85 140 220 330
View Complete Details

Shock Test Machine

  • Payload Height Unlimited
  • Insert Pattern 100 x 100 mm Matrix
  • Shock Rate 1-8 shocks/min
  • Max Deviation of specimen from table centre 30 mm
  • Utilities required Plant air or bottled Nitrogen 6-8 bar 410V, 3 -phase 50 Hz

The machine is fabricated with Mild steel of a very robust design to provide necessary mechanical strength and rigidness. The machine produces the shock pulses using compressed air to force the platform to impact on the elastomer pads (Half-Sine Programmer Pads)which are placed between the platform and anvil of the impact area to produce half-sine pulses, Lead pellets are placed to generate sawtooth pulses and pneumatic cylinders are used to generate square pulses. The drop height and the air pressure are responsible to generate the desired acceleration.

Shock Test Machine is a versatile test equipment to carry out shock tests in accordance with various National & International standards e.g. IS, MIL, EN, ISO, IEC, DEF & ASTM Standards.

The lifting of the platform is done by pneumatic cylinders, the drop height is determined by the desired acceleration level. In a shock test due to the rebounce action secondary shocks may occur, which are totally unacceptable by most of the test standards. Fail safe brakes are used as a rebounce brake and as a quick release device to avoid secondary and tertiary shocks. The shock test machine is isolated from the ground by heavy duty shockers and shock absorbers. The Shock test machine is supported by a PC based intelligent Instrumentation system to control, monitor and analyse acquired shock test waveforms. The system has 4 channels to monitor the shock pulses generated which are expandable upto 16 channels.

Advantages for you    
Customizable Reliable Solutions:Key features   

  • Heavy duty structure
  • Adjustable drop height
  • Standard 4-channel signal conditioner upgradable to 16-channel
  • Adjustable Acceleration and pulse duration
  • Use of Shock Amplifier can be made to increase the change in velocity & acceleration upto 30, 000 'g'
  • Capable to perform tests in accordance with various standards eg. IS, MIL, DIN, ISO, EN, IEC, DEF, JS55555 & ASTM etc.


Efficient performance:Key features        

  • Pneumatic operation with low maintenance requirement
  • Fail safe brakes for no Secondary or Tertiary Shocks
  • Shock Response Spectrum Analysis
  • Shock tests in accordance with various international standards
  • Shock Response Spectrum Analysis
  • Shock tests in accordance with various international standards
  • Highly accurate repeatability
  • Ground is isolated from bumps generated


User Friendly:Key features        

  • PC based control, monitoring and waveform analysis
  • Various safety interlocks for safe operation
  • Report generation feature


PC Based Instrumentation System
Shock-Test-Machine-control Tarang PC based instrumentation system provides an easy control, monitoring and waveform analysis to be done. The control of the machine is very user friendly and incorporates various safety interlocks for safe operation of the machine. The test report of any test performed can be viewed and printed easily. The Shock Analysis software is specially designed for the analysis of waveforms generated. Shock Response Spectrum Analysis can also be done with this software.

Pneumatic Shock Test Machine Standard Models

Model TSTS - 6060 TSTS - 7570 TSTS - 7575 TSTS - 1010
Table Size 600 x 600 mm 750 x 750 mm 750 x 750 mm 1000 x 1000 mm
Payload Capacity 200 Kg 250 Kg 500 Kg 1000 Kg
Payload Height unlimited unlimited unlimited unlimited
Max Payload Size 600 x 600 mm 750 x 750 mm 750 x 750 mm 1000 x 1000 mm
Insert Pattern 100 x 100 mm Matrix 100 x 100 mm Matrix 100 x 100 mm Matrix 100 x 100 mm Matrix
Stroke Length (Max) 300 mm 350 mm 350 mm 450 mm
Velocity Change No load 7 m/s 7 m/s 10 m/s 15 m/s
Velocity Change Full Load 5 m/s 5 m/s 8 m/s 8 m/s
Standard Test* 20’g’ – 11’ms’
30’g’ – 20’ms’
40’g’ – 6’ms’
50’g’ – 11’ms’ 50’g’ – 18’ms’
100’g’ – 6’ms’
150’g’ – 3’ms’
200’g’ – 3’ms’
Pulse Shape Half Sine Optional - Sawtooth / Square wave / Trapezoidal Waveform
Shock Rate 1-8 shocks/min 1-8 shocks/min 1-8 shocks/min 1-8 shocks/min
Max Deviation of specimen from table centre 30 mm 30 mm 30 mm 30 mm
Machine Mass 4000 kg 4500 kg 5500 kg 6500 kg
Dimensions (mm) 900*900*1500 1000*1000*1600 1000*1000*1600 1500*1500*2000
Utilities required Plant air or bottled Nitrogen 6-8 bar 410V, 3 -phase 50 Hz
Safety Interlocks Mains Input Over & Under Voltage, Phase drop, programmer pad change protection, over travel, Fail safe brake






View Complete Details

Pneumatic Shock Testing Machine

  • Material Metal body
  • Power High high power
  • Country of Origin India
  • Features Smooth operations, Long functional life

Features:

  • Upgradation of Windows 11 based Data Acquisition & Control System
  • Replacement of micro-switch controls with PC based controls
  • Complete overhaul of the machine
  • Upgradation of the braking system
  • Upgradation of the Pneumatic Control Panel
  • Refurbished machine comes with 1 year warranty
View Complete Details

Centrifuge Machine

  • Feature Low Maintenance
  • No Of Tes t Proiles 1-100
  • Utilities Required Plant air or bottled Nitrogen 6-8 bar 410V, 3 -phase 50 Hz
  • Safety Interlocks Mains Input Over & Under Voltage, Phase drop, Door Lock, Imbalance Vibration

Tarang's Centrifuge Machine for Acceleration is used to analyze the mechanical behavior of parts and assemblies subjected to linear acceleration.

Centrifuge Machine is a versatile test equipment to carry out acceleration tests in accordance with various National & International standards e.g. IS, MIL, EN, ISO, IEC, DEF & ASTM Standards.

The centrifuge machine for acceleration has a robust structure that consists of an outer enclosure for safety point of view to withstand centrifugal force acting on the test object. It consists of a rotating platform with two mounting plates which can accommodate a wide variety of payloads, in various sizes and load at a required radial distance from centre to achieve the desired acceleration. The machine is driven by permanent magnet brushless servo motor. The speed of machine is varied by the PWM amplifier with instrumentation system having builtin digital closed loop control.

Tarang Linear Acceleration Machines are available from 1mG to 10000G / 1g-kg to 50000 g-kg of very high precision. Facility of visual monitoring of Unit under Test mounted on platform is through CCTV. Electrical, electronic, Data transfer, RF, Pneumatic, Hydraulic connections are available for actual working conditions test environment.

Advantages for you    

  • Customizable Reliable Solutions:Key features   
  • Rigid and robust structure
  • Visual monitoring of Unit under test
  • Electrical, Electronics, Pneumatic, Hydraulic terminals are available
  • Capable to perform tests in accordance with various standards eg. IS, MIL, DIN, ISO, EN, IEC, DEF, JS55555 & ASTM etc.


Efficient performance:Key features   

  • Servo motor control for high accuracy
  • Acceleration tests in accordance with IS, IEC, MIL-810, ASTM etc
  • Various safety interlocks for safe operation


User Friendly:Key features

  • PC based control and monitoring
  • Easy programmable test parameters
  • Upto 100 programmable steps

 

PC Based Instrumentation System
Centrifuge Machine for acceleration control and monitoring system Tarang Centrifuge Machine for Acceleration is supported by PC Based instrumentation system to control & monitor the test parameters. To make the system more versatile a suitably designed LABVIEW based GUI programme to control, monitor various parameters with data logging and data analysis features for setting rotation speed, acceleration "g", radius, test time cycle, unit mass etc as per the test application requirements. All safety interlocks e.g. Imbalance, door open etc are controlled & monitored via external PC with software. The software supports upto 100 programmable test profiles in a single test.

Linear Acceleration Machine Standard Models

Model TCAM - 250 TCAM - 500 TCAM - 1000 TCAM - 2500
Acceleration Range 1-50 ‘g’ 1- 10 0 ‘g’ 1-1 00 ‘g’ 1 -200 ‘g’
Nominal Radiu s 3 00 m m 7 00 m m 750 m m 1250 m m
Platform Radius range 250-350 mm 500-900 mm 550-950 mm 750-1750 mm
Payload size 100 mm cube 400 mm cube 400 mm cube 1000 mm cube
Payload Capacity 50 Kg 50 Kg 100 Kg 250 Kg
No Of Tes t Proiles -657436 -657436 -657436 -657436
Max speed 550 rpm 350 rpm 350 rpm 400 rpm
Speed resolution .01rpm .01rpm .01rpm .01rpm
Dimensions Dia – 800mm
Height – 800mm
Dia – 2000mm
Height – 2000mm
Dia – 2000mm
Height – 2000mm
Dia – 3600mm
Height – 2000mm
Mass 1500 Kg 2500 Kg 3000 Kg 5000 Kg
Online Testing Connections (Slip Ring) Electrical, electronic, Data transfer, RF, Pneumatic, Hydraulic connections (Multiple connection configuration is available)
Utilities Required Plant air or bottled Nitrogen
6-8 bar 410V,
3 -phase 50 Hz
Plant air or bottled Nitrogen
6-8 bar 410V,
3 -phase 50 Hz
Plant air or bottled Nitrogen
6-8 bar 410V,
3 -phase 50 Hz
Plant air or bottled Nitrogen
6-8 bar 410V,
3 -phase 50 Hz












View Complete Details

Armature Rewinding Power Amplifier

  • Min. Order (MOQ) 1 Piece
  • Driven Type Electric
  • Condition New
  • Application Motor Use
  • Type Armatures
  • Country of Origin India

 Armature Rewinding & Replacement Power Amplifier

Tarang Kinetics rewinds Armature Coils of all make Vibration Shakers including that of LOS / UD / IMV etc.

We provide new replacement Power Amplifiers for all old Vibration Shakers.

We repair/ supply new Slip Tables for old systems of all makes.

View Complete Details

Fixture Design

We offer custom made fixtures that increase the loading options for testing multiple test objects on your shaker system. The 'L' and 'T' shape fixtures are used to provide a mounting surface perpendicular to the direction of the test apparatus. This eliminates the need of high cost slip table attachment where the test object can be mounted on the L or T fixture.

One of the least expensive method to perform multi-axis vibration testing is through the use of specially designed fixtures. These fixtures provide atleast one vertical mounting surface to allow two axes of vibration by rotation of the test article.

Our team can do fixture designing for your test applications. The designing of custom made fixtures is done after understanding the test application and doing the software simulation and analysis.

View Complete Details

Vibrating Test Machine

  • Material Mild Steel

Electro-Dynamic Shaker

Our system consists of Drive Coil (Armature) positioned in direct current magnetic field excited by alternating current signal generated by Digital Power Amplifier. This generates a force making the drive coil to move as per the magnitude and frequency of the signal. This vibratory force is applied on the objects/specimens mounted on Shaker platform. The armature assembly utilize modern armature suspension systems which is Rolling strut type featuring low transverse motion.

Capable to perform tests in accordance with various standards eg. IS, MIL, DIN, ISO, EN, IEC, DEF, JSS 55555 & ASTM etc.

Power Amplifier

The Digital Power Amplifier is a MOSFET/IGBT based Modular Type Class-D Switching interlocked with the shaker. Digital Amplifier Controller is a microcontroller, colour touch screen based userfriendly interface equipped with self-diagnostic, calibration and protection features which gets the input signal from vibration controller and controls the alternating current amplitude and frequency accordingly.

The remote operation module can be optionally used to remotely operate the complete Vibration Test System.

 

Vibration Controller

The Digital Vibration controller is used to simulate actual field vibration conditions at test laboratory in a controlled manner so as to reproduce the same vibration atmosphere.

The controller is capable of full control and analysis applications for sine, resonance & dwell, random, classical shock, random-on-random, sine-on-random, shock SRS, vibro-shock and field data replication.

Head Expander and Slip Tables

Our range of wide variety of head expanders and slip tables provides various possibilities to increase the effective mounting surface and orientation of the direction of test.

Mg Alloy is used for the construction of head expander s and slip tables to ensure minimal weight thereby being more suitable to the existing force of the system.

Customizable Reliable Solutions

  • Long stroke with displacement up to 76 mm
  • High Velocity with velocity up to 2. 4 m/s
  • Low mass, Magnesium Alloy Armature Structure
  • Various safety interlocks for safe Operation
  • Capable to perform tests in accordance with Various standards eg. IS, MIL, DIN, ISO, EN, IEC, Def , JSS 55555 & ASTM etc.

 

Efficient performance

  • PC based Remote Operation of Power Amplifier
  • Auto-Resume from power failure
  • Robust rolling struct suspension
  • Efficiency is greater than 920/o
  • High Signal to noise ratio
  • Auto Centring of Armature
  • Self-Lubricating Armature Guidance Bearing

 

User Friendly

  • Touch Screen based Digital Amplifier Controller
  • Trunion mounted shaker for easy integration with slip Table for X-Y Axis Testing
  • Modular in design for easy and quick operation
  • Body Isolation using Air Bellows for Vibrations from Shaker

 

Universal Compatibility

  • Compatible with all worldwide controllers
  • Integration with Environmental Chamber
View Complete Details

Vibration Integrated Chamber

  • Country of Origin Made in India
  • Power Source Electric
  • Body Material Mild Steel
  • Frequency (Hz) 50 Hz
  • Finishing Powder coated
  • Frequency 50-60 Hz

The Integrated system are meant for applications that demand accelerated multi environment test systems. The integrated testing ascertains the reliability and endurance of the test units by simulating environmental conditions as they are. The vibratrion shaker slips over the rail guide and combines with the chamber. Both the systems can be used in integrated configuration else both systems can be utilized individually as well.

These are customizable solutions and as per the exact requirement of the customer the system parameters of the Integrated system can be configured.

Vibration Intergrated Chamber is a versatile test equipment to carry out vibration tests in accordance with various National & International standards e.g. IS, MIL, EN, ISO, IEC, DEF & ASTM Standards.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Anil Kumar Jain & Akshat Jain (Tarang Kinetics)
  • C-20 Industrial Estate, Ramnagar, Roorkee, Uttarakhand - 247667
  • https://www.tarangvibration.com
  • Share us via
  • Call 08069247352 Ext. 644