Tech7 Automation Systems (l) Pvt. Ltd

GN Mills, Coimbatore, Tamil Nadu

We are a well-known manufacturer, exporter, supplier and service provider of AMF panels based in Coimbatore, Tamil Nadu. The automatic mains failure panels are used to changeover from mains to generator during a power outage. The panels are made from RITTAL enclosures and provide constant monitoring of three-phase current. It has an alarm in case of failure to start. An emergency stop and generator stop with delayed timing is also provided.

Applications :

• AMF Panel & Battery Chargers are used where the generators are installed between main AC and load.
• It will Start and Stop the Generator automatically and Changeover the EB/Generator lines.

General Spacification :

• Systems Voltage : 380/415/440V
• Bus Bar : Tinned EC Grade Copper/ Aluminum Sleeved with Colored PVC
• Bus Bar Short Circuit : Up to 50KA for 3 Seconds Duration
• Type of construction : Free Standing, Floor Mounted, Cubicle Design
• Degree Of pr otection : IP 5X
• Enclosure : Rittal Modular Enclosure with 1.6mm/2mm CRCA sheet steel, Dip coated and Powder coated as per International standards
• Color : RAL 7032 Shade
• DG Sync Relay : DEIF AGC Series

Salient Features :

• Our AMF Panels panels are made of fully RITTAL Enclosures.
• Provides continues monitoring of three phases.
• Automatic Shut down during DG Fault.
• Auto/Manual Selector is available.
• Generator Stop with delay of timing possible.
• Hooter Alarm Annunciation for fail to start.
• Emergency Stop is available.

Based in Coimbatore, Tamil Nadu we are a leading manufacturer, exporter, supplier and service provider of PLC Panels. The PLC Panels we manufacture are compliant with industrial standards. These systems which are in used in the machines we manufacture help in reducing human error and material wastage. The systems can be customized to meet client requirements.

Details :

The systems are based on different programming software. These systems help in making the process automatic without any human intervention that in turn also eliminates the possible human errors. The automation of systems makes the whole process accurate with less material wastage and consistent product quality.

The process data is recorded continuously batch wise, line wise and equipment wise and can be shared by using SQL ERP System. This data helps in conducting yield analysis, production rate productivity and material & manpower usage. It also sends text messages to the concerned staff in critical situations. It is managed using Distributed Computing architecture (DCS).

We provide PLC based Control panels for Various Industrial Application, Machine Automation, and OEM Solutions etc.

Salient Features :

• We do the complete design based on the process requirement
• We design and select required sensors and process instruments based on customer requirement
• We design & Select the PLC , Necessary hardware including Touch Screen with various Industrial Communication for the Entire Plant/Machine Automation
• Complete panel / Control dusk Building facility
• We prepare Process operational Flow Chart based on the actual requirement
• PLC Logic & SCADA Screens will be prepared based on the Application
• Site Commissioning & Service Supports

We are known for offering Industrial AMF Panels to the customers. These automatic mains failure panels are used as automatically changeover from mains to stand-by generator in case of power failure. Highly demanded in foundries, apartments, sugar, textiles, chemical industries and others, these panels are designed in compliance with the international quality standards. AMF Panels and Battery Chargers are used where generators are installed between main AC & load. Besides, it starts and stops the generator in an automatic manner and changeover the EB/generator lines.

Application:

AMF Panel & Battery Chargers are used where the generators are installed between main AC and load.

It will Start and Stop the Generator automatically and Changeover the EB/Generator lines

1. Our AMF Panels panels are made of fully RITTAL Enclosures.

2. Provides continues monitoring of three phases.

3. Automatic Shut down during DG Fault.

4. Auto/Manual Selector is available.

5. Generator Stop with delay of timing possible.

6. Hooter Alarm Annunciation for fail to start.

7. Emergency Stop is available

We are a renowned manufacturer, exporter, supplier and service provider of DG Synchronization Panels based in Coimbatore, Tamil Nadu. The high grade panels are made using good quality materials and the latest technology. The panels are user friendly with both auto and manual controls. The DG Synchronization Panels have full RITTAL enclosures with digital meters. We ensure good packaging and timely delivery.

General Specification :

• Systems Voltage : 380/415/440V
• Bus Bar : Tinned EC Grade Copper/ Aluminum Sleeved with Colored PVC
• Bus Bar Short Circuit : Up to 50KA for 3 Seconds Duration
• Type of construction : Free Standing, Floor Mounted, Cubicle Design
• Degree Of protection : IP 5X
• Enclosure : Rittal Modular Enclosure with 1.6mm/2mm CRCA sheet steel, Dip coated and Powder coated as per International standards
• Color : RAL 7032 Shade
• DG Sync Relay : DEIF AGC Series

Salient Features :

• Our DG Synchronization panels are made of fully RITTAL Enclosures
• MCC Panels are fully modular Type
• Enclosures are Dip Coated and Powder Coated 1.6/2mm CRCA Sheet Steel
• For low-voltage switchgear with design verification to IEC/EN 61439-1 and -2.
• For control systems and power distributors structured system solution for switchgear with Form separation 1-4b.
• Simple, installation-friendly system assembly
• Based on enclosure platform TS 8
• Profiles are 16 Folded Profile
• All switchgears are Branded Like Siemens/Abb/Schneider/L&T/Ge EtcAll Meters are Digital Meters

DG Sync Benefits :

• Automatic Load Sharing in between DG
• Auto Synchronization
• Auto Start is Possible if EB Supply is not available
• DG Operate with its maximum efficiency
• No Overloading. Automatically Start the Next DG Manual Intervention is not required
• No need to separate Load based on DG Capacity
• Different Capacity/Make can be synchronized
• DEIF Synchronizing Relay is used in our projects