Other Products / Services #125190

Roll-out double extension platform provide mord workspace Platorm size 6.57m1.83m Neatly folding guardrailsmake it easy to maneuver through doorways, into elevatorsand throughout other height-restricted areas Self-leveling hydraulic outriggers Rough terrain capabilies with 40% gradeability Tube protection package, to prevent accident, reduce replacing cost Slide out engine tray for easy maintenance access Slide-out battery trays facilitate servicing On-board diagnostics help operators troubleshoot on the fly and make adjustments in the field to maximize uptime

Standard equipment

Can Bus TechnologyProportional controlsTwo self-closing gates4WDOscillating axleSlide-out engine trayTilt protectionTilt alarmHornHour meterSafety electric pumpFault indication on platformAnti-restart engine protectionThe glow plugs for cold startingTwo extended platformsFlashing beaconsEuropean III emission engineOver loading limited

TMDC is an ultimate easy & safe Durm Carrier with Hydraulic System to lift & Transport the MS/Plastic Drums by a single person from one place to another in big godowns, production areas etc. it can also put the Drum from floor to Pallet.

Two big size rear wheels are provided with two bearings each & one front wheel swiveling type is also with double ball bearings for smooth running. All Three wheels are PU Coated to avoid any damage to floors & rattling noise. No maintenance is required in this type of drum carrier.

This Drum carrier can lift & transport the Drum without touching the drum by operator. Its Hydraulic system automatically grips strongly from the top edge of Ms or Plastic Drum & lift it from ground or Pallet.

There is enough gap in front base channel from ground by which this drum carrier easily glides over pallets to quickly load or unload 250 liter standard drums (Ms or Plastic). It grabs drum from the middle of a standard pallet, raises the drums up, and can remove form the pallet and vise versa can load on pallet. This is a highly maneuverable unit, features a unique 3- wheel design with large 6 PU wheel and a caster brake.

Standard Equipment & Facilities:

• Leveling outrigger device.
• Emergency Stop Button
• Tilt Back Frame for easy loading in pickup truck
• Two Controllers Operations.
• Emergency down button.
• Leveling Indicator.
• Forklift Pockets
• Transport Tie Hole.

These ''Jet" Mobile Ramps are used for shifting of fork-lift trucks, cars and industrial vehicles between various ramps and the ground level. If the mobile ramp is not in use, it can be rapidly shifted and applied elsewhere. The elevation of the ramp is done by using manual hydraulic pump. These ramps are the connecting bridge for the forklift to drive between the floor and the carriage while loading and unloading goods. It's mobility will meet the needs of mobile work in the different loading areas. Bearing beams made of high strength rectangular shape manganese steel pipes have high rigidity. Ramp surface made of corrugated steel board has super slip-proof capability. Its powered by manual hydraulic pump for elevation and, there is no need of electrical power for outdoor use. Mobile Ramp is capable of accelerating the loading and unloading operations and ensuring safety. It is an ideal auxiliary equipment for modern logistics. Height-adjustable supporter to prevent the vehicle from overturning installed to uphold the beam of the vehicle backend in order not to overturn the vehicle when the forklift enters and the gravity centered at the end. This will completely ensure the safe operation. Length-adjustable chains to hook up the vehicle to prevent the separation of the ramp and the truck in case of any movement of the ramp or the truck to ensure safety

This platform can be easily and safely fitted on the forks of any type of Forklift. Two pockets are to be inserted in the forks & bolted with the top for safety. A power pack with battery is mounted on the base of this platform by which the operator can lift the platform hydraulically in UP& Down position.

First raise the forks of the forklift to whatever height these can reach & then the operator, standing in the platform cage , will raise the platform cage up to whatever height required. It is a very useful working platform for the companies who have their own fork lift and require maintenance work done as a greater height than the reach of the fork lift, inside or outside the plant or on the road, like fixing the lamp on the poles etc.

The product Battery Drive Seissor Maintenance Platform is mainly applied in construction site, power, communication, airport, conference and exhibition center, supermarket, factory, station, subway station, etc.

1. The scissor lifts is controlled based on the imported advanced intellitgent technology.
2. It is powered by DC, can move automatically, has the function of infinietly variable speeds, can be controlled manually and requires no manual push.
3. The driving motor has the automatic braking function.
4. It can climb to a certain gradient.
5. The platform can be extended horizontally.
6. The malfunction can be displayed in codes. The emergent drop will be locked.
7. The electricity recharge is protected. In recharging condition, the operation is stopped.

This is an Electric Aluminum Work Platform suitable for attending the maintenance works of lighting, overhead cranes, window cleaning etc., at high levels in workshops, warehouses or anywhere on good pucca floors. This is suitable for 2 persons to work on full height with some small tools and tackles. Height is available 18mtr, & 20 mtr, and platform size is around 1600 x 1080 mm.Heavy duty alloy aluminum Masts, minimize the sway on full height. It has got four outriggers for purposes of stability. All the controls are in the hands of the operator. The steering angle is 180 degree. The front handle operates directly to the driving wheel, therefore, to change direction, turn it to the required direction. For moving the platform keep the handle in its central position while to stop, move the handle to its upper position or in its lower position. When released the handle returns automatically to upper position and acts as a parking brake. Horn is also provided to avoid accidents. Battery meets international standards and to charge the battery, 220 V AC Power supply is required to battery charger. A digital display of Battery Charging is provided on the front cover which shows charging position of Battery while using or charging the Battery. High quality Power Pack with minimum & easy maintenance is designed for this type of aerial maintenance platform. For easy loading / unloading this machine in the trucks, fork pockets are provided in base of the platform. Lifting & Lowering & traveling of the platform is done by push Buttons placed on the handle. The aerial maintenance platform can be driven by a person either from the ground or standing on the platform. We have incorporated following Special Features in our Aerial Maintenance Platform: Buzzer & Caution Light on the chassis of the machine which flashes during up and down movement of the Platform. An AC 220V Electric Socket at the top of Platform has been provided to do jobs by small electric tools. Power Pack: Winner Taiwan make, which is a world renowned name for its quality & reliability. It is a very important part of the above machine. Leveling System: There are two sprit level provided in the platform 1st is on front side of the platform and 2nd is back side of the platform for the proper leveling of the platform.

This is an Aerial Maintenance Platform suitable for attending the maintenance works of lighting, overhead cranes, window cleaning etc., at high levels in workshops, warehouses or any where on good pucca floors. Heavy duty alloy aluminum Masts, minimize the sway on full height. It has got four outriggers for purposes of stability. All the controls are in the hands of the operator. The wheels are wide faced, each with double ball bearings, by which one person can pull/push the machine very easily. The net weight is very low compared to the work done at so much height.

All models are available in Battery operated lifting (DC) or single phase 220v (AC) power operated lifting version, optionally.

Double Mast Platform:

This is suitable for 1-2 persons to work on full height with some small tools and tackles. Height is available 6m, 8m, 10m, and 12m & 14 m, and platform size is around 1200/1400x600mm.

We have incorporated following Special Features in our Aerial Maintenance Platform:

1. Buzzer & Caution Light on the chassis of the machine which flashes during up and down movement of the Platform.
2. An AC 220V Electric Socket at the top of Platform has been provided to do jobs by small electric tools.
3. Towing Handle directly connected to the Front Wheels for easy movement & good maneuverability , instead of caster wheels.
4. Power Pack: Winner Taiwan make, which is a world renowned name for its quality & reliability. It is a very important part of the above machine.
5. For easy loading / unloading in the trucks, fork pockets are provided in base of the platform.

This Battery Drive maintenance Platform is suitable for attending the maintenance works of lighting, overhead cranes, window cleaning etc., at high levels in workshops, ware houses or any where on goods floors or roads. All the controls for up. Down, start, stops are provided for a smooth & safe lifting & driving by joystick. All sides moments, brakes are provided to operator on the platform for smooth working.

These are available in two version i.e. double mast and single mast. Double mast maintenance platform can lift 2 persons up to 7.5 / 9.0 mtr. height and single mast can lift one person up to a height of 6.0 / 7.5 mtr. Both are stable, safe and easy in working, & smooth in driving to all directions. The operator can attend to jobs even up to 8 mtr, 9 mtr, and 11mtr, heights. These are completely safe machines and exactly suitable for working on heights.

Two load wheels each with two ball bearings and two steering drive wheels with two ball bearings each are provided. There are several vertical masts, which open while moving up and close while going down. All the controls are in the hands of operator. The wheels are wide faced for easy and safe drive on good pucca floors. The net weight is very low comparing to the work done at 8 11 mtr, heights, and battery drive also.

The product is mainly applied in power, communication, airport, conference and exhibition center, supermarket, factory, station, subway station, etc. It is for two persons working together. 1. It is powered by DC, can move automatically, has the function of exchanging low and high speeds, can be controlled manually and requires no manual push. 2. The driving motor has the automatic braking function. 3. It can climb to a certain gradient. 4. It has the function of protection of floor pit and tilt alarm. 5. The malfunction can be diagnosed and displayed in codes. The emergent drop will be locked. 6. The electricity recharge is protected. In recharging condition, the operation is stopped.

This Aerial Order Picker has been introduced as a lighter version of battery/electric operated lifting platform with the features that the operator will stand over the rising platform under full protection of railings and go UP by pushing the UP button & come down by pushing DOWN button. The platform can accommodate one person with small packages, tools etc.

It can also travel short distance manually in shop or warehouse and is very light machine. This is also most conveniently used for working on machines, which are quite high and require handling at heights or more than 2 Mtr. Moreover, certain operations have to be carried out vertically up and down, for which this is an ideal machine.

Standard Equipments:

• Emergency Stop Button
• Battery Charger Indicator
• Two Brakes in wheels
• Safety Guide Railing
• Emergency Release Valve

Jet Battery Drive Order Picker by Techmech Handling Equipments has been introduced as a lighter version of battery drive platform/stacker with the features that the operator will stand over the rising platform under full protection of railings and go up to pick and choose the packages from the racks and bring them down with ease. Similarly, he will take the packages up and place them on the racks at their proper place.

This is also most conveniently used for working on machines and jobs, which are quite high and require handling at heights of more than 2 mtr. Moreover, certain operations have to be carried out vertically up and down, for which this is as ideal machine. It can be used also as a maintenance platform in godowns, big halls, etc.

All the controls for drive to all sides up, down, start, stop are provided to the operator on the lifting platform.

Its capacity is only 300 Kgs. and lifting height is with in the range of 3000 mm to 3500 mm., in two version. Platform size is 600 x 640 mm., to accommodate one person and small packages. It can also travel (Battery Drive) short distance in shop, warehouses, big Shopping Malls, Etc, and is a very light machine within 460 Kgs. Weight and 1550x800 mm.

Overall dimension.

Batteries are chargeable & maintenance free with long life.