Our Products
Our product range contains a wide range of TLPPL 137 TECHNICO SALT SPRAY CORROSION TEST CHAMBER
Technico salt spray test chamber entire is constructed by thick polypropylene or acrylic sheet body. The top lid door will be made of transparent Acrylic. The solution reservoir is separated externally in a cylindrical vessel and fixed to the side of the main chamber. The solution is sprayed inside the chamber by means of compressed air (Air compressor not in our scope) and its level is controlled by float valve.
The main chamber is provided with transparent acrylic cover lid mounted on fabricated acrylic hinges. The top lid closes the entire chamber without fog leakage. The saturation tower and the control panel are attached with the sidewall of the main chamber. The control panel is made of FRP material. Solution and water drain out tap are also provided. Suitable specimen holders and job holding devices are furnished inside the chamber.
Technical Specification:
Temperature controller:
Humidity Indicator:
Digital Timer:
Pressure gauge:
Solution tank :5 % of the sodium chloride (100 lit) is prepared and poured in the chamber reservoir. It is passed to the spray tower through the mechanical float through which is maintaining the water level in the tower.
POWER SUPPLY:The chambers plug pin should be connected to the power supply & the timer to be set according to the testing hours.
PRESSURE REGULTOR WITH GAUGE:The compressed air enters to the solenoid valve. It is controlled by the help of pressure regulator (15 lbs.) in pressure gauge.
When the testing specimen or components are loaded to the chamber. The drain out valve is kept open because the condensed for water should not touch the specimens
STANDARD SIZE:600 x 600 x 600H or 600 x 900 x 900H.
TECHNICO LABORATORY PRODUCTS PVT. LTD. (TECHNICO LABORATORY PRODUCTS PVT. LTD.)
264, SIDCO INDUSTRIAL ESTATE, NEAR T.N.E.B. SUB-STATION, THIRUMUDIVAKKAM, Chennai, Tamil Nadu - 600044
Share us via
Write a Review
