Other Products / Services #5508582

Tank revolution speed 24 Rpm, Adjustable 'L' type S.S. Angle Stirrer One No, Slurry drum removable from top by removing fixing bolts.

The wax -meltingconditioning tank is used for preparation of wax for its subsequent feeding into the injection press and gravity casting of wax moulds. The melting tank is made of S.S.-304 and heated all around by low current density electrical heaters. The output shaft of the geared motor is directly coupled to the stirrer. The stirrer uniformly blends the wax causing a continuous and complete turnover of wax in the tank.Small pieces of wax are loaded from the top and heaters switched ON. The stirrer motor may be started when it is felt that the stirrer is free to rotate. Temperature controller maintains the wax temperature. It may take a long time to melt all the wax if the machine is started from the cold. Heated wax valve allows easy draining of wax.The electrical Panel Box Temperature controller, heater relay, motor contactor, motor overload, MCBs, main switch etc.

The wax -meltingconditioning tank is used for preparation of wax for its subsequent feeding into the injection press and gravity casting of wax moulds. The melting tank is made of S.S.-304 and heated all around by low current density electrical heaters. The output shaft of the geared motor is directly coupled to the stirrer. The stirrer uniformly blends the wax causing a continuous and complete turnover of wax in the tank.Small pieces of wax are loaded from the top and heaters switched ON. The stirrer motor may be started when it is felt that the stirrer is free to rotate. Temperature controller maintains the wax temperature. It may take a long time to melt all the wax if the machine is started from the cold. Heated wax valve allows easy draining of wax.The electrical Panel Box Temperature controller, heater relay, motor contactor, motor overload, MCBs, main switch etc.

type structure working area motor gear box

drum rotates at low speed inside the fix horizontal drum.

frame made from m.s. Angle & hopper 3mm m.s. Sheet & covered.

900 x 900mm. Depth.

1.5 hp 1440 rpm motor.

made by elicon.

Wax tree coating fluidized bed machine, Fabricated Structure M.S. Square Pipe, Electric Motor For Blower Make CromptonABB or equivalent make, Metal Filter for fluidizing, Pipe connection and butterfly valves.

sand fluidizes bed control blower

3 drums of ms sheet 600mm. x 600mm. high includes metal filters for universal air blow.

control butterfly valves.

7.5 hp blower.

We are main supplier of this product.

Fabricated Structure M.S. Square Pipe, Gear Box Elecon or equivalent Make, Bearing Housing TM Make, Electrical Motor: 2 H.P. 1440 RPM Crompton or equivalent make.

Slurry Tank Dimension Tank Material Mixing Tool Drive Tank Cover Tank Position

Diameter 600mm. X H 600mm.

Stainless steel 304.

L type stirrer.

Geared box of 60:1Elecon make.

712mm. X 630mm. height made by M.S. Provision to open/close.

Mounted on base frame.

Type Structure Blower

Pneumatically Knocking the parts.

Proper rigid structure made by M.S. Pipes Channels & Angle.

1.5 hp blower 600 CFM.