Our Products
We are engaged in the manufacturing and export of Pressure Feed Spray Gun (W-106). Our Pressure Feed Spray Gun (W-106) is made using high quality material; the stainless steel fluid path makes the flow of paint easy. Our Pressure Feed Spray Gun (W-106) is light weighted and used for long working process and mass production. The gun of Pressure Feed Spray Gun (W-106) can rotate in any direction during the time of painting. Our Pressure Feed Spray Gun (W-106) contains air adjusting knob for better flow.
Technical Specifications
Model | W-106 |
---|---|
Type | Pressure |
Std. Nozzle | 1.0/1.5mm |
Operating Air Pressure | 2-4 Kgf/cm2 |
Air Consumption | 145 L/Min |
Fluid Output | 270 Ml/Min |
Pattern Width | 240 mm |
Air Inlet | 1/4" BSP |
Paint Inlet | 1/4" BSP |
Weight of the Gun | 350 gms |
Pressure Feed Spray Gun (W-206) that we supply is known for the Converised painting line and mass production of work. Our Pressure Feed Spray Gun (W-206) is a high performance gun containing high paint transfer efficiency. The Pressure Feed Spray Gun (W-206) is widely used for continuous spray painting work. The Pressure Feed Spray Gun (W-206) rotates in all direction making it easy for the operator to work. The lightweight Pressure Feed Spray Gun (W-206) has in inbuilt air adjusting knob for proper operation.
Technical Specifications
Model | W-206 |
---|---|
Type | Pressure |
Std. Nozzle | 1.3mm |
Operating Air Pressure | 3-5 Kgf/cm2 |
Air Consumption | 200 L/min |
Fluid Output | 350 ML/min |
Pattern Width | 300 mm |
Air Inlet | 1/4" BSP |
Paint Inlet | 3/8 "BSP |
Weight of the Gun | 422 gms |
high pressure washer for domestic , personnel use for vehicle cleaning, indoor and outdoor floor cleaning, staircase area cleaning and so forth. It uses pressurized water for effective cleaning. It needs easily available single-phase power supply and is provided with robust wheels for easy mobility.
features :
compact and portable
corrosion resistant finish
longer functional life
specifications :
works on single phase: 230 volt, 50 hz supply
uses :
vehicle cleaning
compound wall cleaning
outdoor floor cleaning
outside stair case cleaning
garden equipment cleaning
CEILING Wall Plastering is tedious method, time consuming, heavy load work. To avoid conventional method, We introduce unique Compressor driven Plastering Machine. In this method Sprayer is filled with Plaster Material.
Hopper capacity 5 Kg. Handle is provided with comressor trigger, Input connection. Nozzles were provided at the bottm of Hopper.Spraying of plaster becomes easy due to air pressure, as it atomises mixture, operator have to move handle alongwith wall surface, Then it has to lavel properly.
Feature
Faster Application Speed.
Easy Handling.
Reduces Stress.
Manufacturer & Supplier of a wide range of products which include Double Diaphragm Pump such as Double Diaphragm Pump TI 010, Pneumatic Double Diaphragm Pumps and Air Operated Double Diaphragm Pumps.
DOUBLE DIAPHRAGM PUMP TI 010 is basically used for transfer of paint or low viscouse Fluids
to Spray Paint Guns.
Features
Sturdy design
Teflon Diaphragm
Long Life
Leading Manufacturer and Supplier of Painting Accessories such as Paint Transfer Pumps, Pneumatic Paint Agitator, Air Hose Assembly, Hose Connectors, Powder Coating Booth, Spares for Spray Guns and many more items from Pune.
Leveraging on our rich domain experience and immense technological knowledge of manufacturing and distributing a large assortment of Painting Accessories and Tools, we are offering Paint Transfer Pumps that work by application of piston pressure. These are extensively used for seamless feeding of paint to the gun in paint kitchen systems. We offer these at reasonable rates to our prestigious patrons.
Features
Easy to use
Impeccable finish
Easy mobility
Internal Pipe coating equipments are designed to coat inside the pipe or tubing without the need to rotate pipe or tube up to maximum 140 mm. It applies an even paint film thickness throughout internal surface of pipe.
One man should operate the Control Gun while another man pulls the tool through the pipe or tubing. Pipes above 140 mm required rotation during the coating.However , exact system will be supplied , based on individual internal dimension of pipe.
2 K dispensing system mainly used for precise dosing of base and Hardener. This is fully Automatic Feeding and dosing system. Quantity of dose can be adjusted as per requirement. This system is precisely controlled with Micro base PLC system. Mixing Ratio is adjustable. Dosing is done with Feeding gun either with Low or Highr pressure Pumps. .
FEATURES
Precise control over Dispensing.
Fully Automatic Controls.
Robots and Compact design.
Indegeneous design.
Our Paint Agitator is manufactured using the latest machinery to make it efficient in performance. Our Paint Agitator is highly demanded in the market as it is easy to operate and carry. The Paint Agitator operates with paint stirrer which avoids the settling of paint particles at the bottom. Our Paint Agitator is used for its high work efficiency.
Technical Specifications
Type | Rotary |
---|---|
Air Press. Reqd. | Max. 1 -4 Kgf/cm2. |
Air Consumption | Max. 5.5 cfm |
Air Inlet | ¼ " BSP |
Std. Impellor | Anchor type |
Material of shaft | Stainless Steel |
Container size | 4-45 Litre |
Mounting | Stand(optional) |