benzene sampler

overview: with many years of work, technogroovy is the best in providing a set of world-class benzene samples used to insert viable particles into a microbial spray. For volatile organic compounds sampling from ambient air, the sample tube filled with activated carbon tube comes with a techno-gasoline sample, and comes with a digital differential pressure gauge and a speedometer.a 20-200ml gradient scale is provided to monitor the airflow. This organic vapor sample collects samples of organic compounds in the surrounding air by immersing them in a column of activated carbon. The organic matter is analyzed and analyzed by a gas chromatograph to estimate the actual concentration in the surrounding air.

features :

portable, battery operated instrument.

flow meter provides accurate flow reading in 20-200 ml/min flow range.

the combined flow complex indicates directly the volume of air taken in liters.

programmable microcontroller-based timer enables periodic operation to collect compound samples.

technical specification:

flow rate :- 0 3.0 lpm

size: - 170x135x110mm. Approx.

weight: - 900gm approx.

battery :- 12v li-ion rechargeable battery

recharge time:- 12 hours

operation time:- 16 hours on fully charged batteries .

filter: - 37mm/25mm diameter filter discs (whatman gf/a grade) or equivalent.

cabinet: - modular powder coated.

application:

technogroovy's high-volume device is an essential device primarily used to measure the concentration of suspended particles in air. By definition, the suspended particles are very small, have a noticeable rate of decline, and are likely to remain in the atmosphere for significant periods of time. The size of these particles usually ranges from approximately 1 to 100 m.

the total suspended particulate sampler or the tsp large volume air sampler is used to collect the total suspended particulate matter in the surrounding air, where size selection is not preferred. Epa reference method. United states of america for the tsp group.

technogroovy's high-volume air sampling collects particles at a flow rate of 40-60 feet during a continuous sampling period. The tsp oversized air sample is used to determine the total suspended particle concentration or can be used to determine the particle identity.

technogroov's oversized air samples come in a variety of configurations. The platform consists of an anodized aluminum exterior shelter with a flexible roof group. This will include a timer for turning the instrument on and off, a filter holder for the filter media nodes, a vacuum drive, a flow control device, a pressure logger for recording the flow, and the elapsed time indicator for the time calculation. A sample.

specification:

flow rate 1.1to 1.7 cu m/min

particle size down to 1.6 micron depending upon filter used.

recommended filter : gf/a (8 x 10 ) for common use and epm 2000 for special research use.

sampling time record : 0 to 99999.99 hrs. Time totalizer records the running time in hours.

automatic sampling : 24 hour programmable timer, required intervals can be conveniently programmed.

power requirement : 220 volts, 2 amps, single phase ac.

size : with gable roof 440mm (l) x 440mm (w) x 820mm (h)

weight : 25 kg

combined sampler

overview:

with the help of our useful experience, technogroovy is involved in the manufacture and supply of highly efficient combined dust samplers. These samples are widely used in analyzing particle levels in the air, due to their high efficiency and combined function of variable sample sizes. Effective experience in designing and manufacturing these products makes efficient use of skill level techniques. In addition, supplies are manufactured in tamper-proof packaging at market-leading prices.

technogroovy production and supply of optimum quality for compact sampling for the cement industry. Compound sampling is used in the cement industry to measure and control air pollution. According to the requirements of air pollution monitoring, customers can benefit from the samples integrated in various technical specifications.

specification:

pm 10 separator : omni directional air inlet with pm 10 separation through impactor

pm 2.5 separator: pm 2.5 separation through a wins impactor

flow rate: constant sampling rate of 1 m3/hr unaffected by voltage fluctuation and filter choking maintained by critical orifice system

filter media: filter holder designed to accept any standard standard 47 mm dia filter media

suction pump: oil free , non pulsating pump driven by induction motor for stable flow rate

sample volume: dry gas meter records the total air volume sampled .

power requirement: 220v +10 v ac; 50hz + 3% single phase.

benzene sampler

overview: with many years of work, technogroovy is the best in providing a set of world-class benzene samples used to insert viable particles into a microbial spray. For volatile organic compounds sampling from ambient air, the sample tube filled with activated carbon tube comes with a techno-gasoline sample, and comes with a digital differential pressure gauge and a speedometer.a 20-200ml gradient scale is provided to monitor the airflow. This organic vapor sample collects samples of organic compounds in the surrounding air by immersing them in a column of activated carbon. The organic matter is analyzed and analyzed by a gas chromatograph to estimate the actual concentration in the surrounding air.

features :

portable, battery operated instrument.

flow meter provides accurate flow reading in 20-200 ml/min flow range.

the combined flow complex indicates directly the volume of air taken in liters.

programmable microcontroller-based timer enables periodic operation to collect compound samples.

technical specification:

flow rate :- 0 3.0 lpm

size: - 170x135x110mm. Approx.

weight: - 900gm approx.

battery :- 12v li-ion rechargeable battery

recharge time:- 12 hours

operation time:- 16 hours on fully charged batteries .

filter: - 37mm/25mm diameter filter discs (whatman gf/a grade) or equivalent.

cabinet: - modular powder coated.

application:

technogroovy's high-volume device is an essential device primarily used to measure the concentration of suspended particles in air. By definition, the suspended particles are very small, have a noticeable rate of decline, and are likely to remain in the atmosphere for significant periods of time. The size of these particles usually ranges from approximately 1 to 100 m.

the total suspended particulate sampler or the tsp large volume air sampler is used to collect the total suspended particulate matter in the surrounding air, where size selection is not preferred. Epa reference method. United states of america for the tsp group.

technogroovy's high-volume air sampling collects particles at a flow rate of 40-60 feet during a continuous sampling period. The tsp oversized air sample is used to determine the total suspended particle concentration or can be used to determine the particle identity.

technogroov's oversized air samples come in a variety of configurations. The platform consists of an anodized aluminum exterior shelter with a flexible roof group. This will include a timer for turning the instrument on and off, a filter holder for the filter media nodes, a vacuum drive, a flow control device, a pressure logger for recording the flow, and the elapsed time indicator for the time calculation. A sample.

specification:

flow rate 1.1to 1.7 cu m/min

particle size down to 1.6 micron depending upon filter used.

recommended filter : gf/a (8 x 10 ) for common use and epm 2000 for special research use.

sampling time record : 0 to 99999.99 hrs. Time totalizer records the running time in hours.

automatic sampling : 24 hour programmable timer, required intervals can be conveniently programmed.

power requirement : 220 volts, 2 amps, single phase ac.

size : with gable roof 440mm (l) x 440mm (w) x 820mm (h)

weight : 25 kg

combined sampler

overview:

with the help of our useful experience, technogroovy is involved in the manufacture and supply of highly efficient combined dust samplers. These samples are widely used in analyzing particle levels in the air, due to their high efficiency and combined function of variable sample sizes. Effective experience in designing and manufacturing these products makes efficient use of skill level techniques. In addition, supplies are manufactured in tamper-proof packaging at market-leading prices.

technogroovy production and supply of optimum quality for compact sampling for the cement industry. Compound sampling is used in the cement industry to measure and control air pollution. According to the requirements of air pollution monitoring, customers can benefit from the samples integrated in various technical specifications.

specification:

pm 10 separator : omni directional air inlet with pm 10 separation through impactor

pm 2.5 separator: pm 2.5 separation through a wins impactor

flow rate: constant sampling rate of 1 m3/hr unaffected by voltage fluctuation and filter choking maintained by critical orifice system

filter media: filter holder designed to accept any standard standard 47 mm dia filter media

suction pump: oil free , non pulsating pump driven by induction motor for stable flow rate

sample volume: dry gas meter records the total air volume sampled .

power requirement: 220v +10 v ac; 50hz + 3% single phase.