Teraflo Engineering Pvt Ltd.

Pardi, Vapi, Gujarat

Teraflo brand makes highly efficient durable and best Quality V5 submersible pumpset with water filled submersible motors.

• High efficient investment casting process diffusers are use with AISI 304 Material.
• All the rotating parts are balance in precision grade to reduce vibration & noise.
• All guide bushes are protected with sand guards.
• Upper thrust provision provided in each model.
• Pumps are provided with suction guide support.
• Bearing sleeves are provided with hard crome plating.
• Carbon V/S Stainless steel thrust bearing are provided to withstand high thrust load.
• Pumps are Design for maximum water discharge.
• Winding wires are wrapped with superior polymer to withstand wide voltage fluctuation.
• Rotors are painted with special epoxy paint for long life.

• Irrigation/Sprinkler
• Commodity water supply.
• Industrial
• High rise buildings
• Sprinklers
• Unshaped and crooked 6 borehole

Motor Shaft : Fully Stainless steel AISI 410 Diffuser : AISI 304 investment Casting
Stamping : Silicon steel. Impeller : Stainless Steel AISI 410
Casting Part : Cast Iron FG 200 grade. Suction Housing : Cast Iron FG 200 grade.
Thrust Bearing : Carbon v/s Stainless Steel. Pump Shaft : Fully Stainless Steel AISI 410
Copper : E.C. grade min 99.90% Sleeve : AISI 410 with hard chrome plating

• Head Range : 24 to 268 meter
• Discharge Range : 60 to 420 LPM
• Motor Rating : 3.0 HP to 15.0 HP in three phase. - 380V /415V, 50Hz, AC Supply3.0 HP to 5.0 HP in single phase. - 230V, 50HZ, AC Supply
• Voltage Range : 160V to 250V (1 Phase)200V to 440V (3 Phase)

• High efficient investment casting process diffusers are use with AISI 304 Material.
• All the rotating parts are balance in precision grade to reduce vibration & noise.
• All guide bushes are protected with sand guards.
• Upper thrust provision provided in each model.
• All pumps are provided with suction guide support.
• All Bearing sleeves are provided with hard crome platting.
• Carbon V/S Stainless steel thrust bearing are provided to withstand high thrust load.
• Pumps are Design for maximum water discharge.
• Winding wires are wrapped with superior polymer to withstand wide voltage fluctuation.
• Rotors are painted with special epoxy paint for long life.

• Irrigation/Sprinkler
• Commodity water supply
• Industrial
• High rise buildings
• Sprinklers

Motor Shaft : Fully Stainless steel AISI 410 Diffuser : SS 304 investment Casting
Stamping : Silicon steel. Pump Shaft : Fully Stainless Steel AISI 410
Casting Part : Cast Iron FG 200 grade. Suction Housing : Cast Iron FG 200 grade.
Thrust Bearing : Carbon v/s Stainless Steel. Impeller : Stainless Steel AISI 410
Copper : E.C. grade min 99.90% Sleeve : AISI 410 with hard chrome plating

• Head Range : 10 to 450 meter
• Discharge Range : 40 to 780 LPM
• Motor Rating : 3.0 HP to 30 HP in three phase. - 380V /415V, 50Hz, AC Supply3.0 HP to 5.0 HP in single phase. - 230V, 50HZ, AC Supply
• Voltage Range : 160V to 250V (1 Phase)200V to 440V (3 Phase)

Teraflo brand makes highly efficient durable and best Quality V6 submersible pumpset with water lled submersible motors.

• Robust construction to ensure durability of pumpset.
• Winding wires are wrapped with superior polymer to withstand wide voltage fluctuation.
• All the rotating parts are dynamically balance to reduce vibration & noise.
• Carbon Bearing v/s Stainless Steel Segments are used to withstand high thrust load.
• All guide bushes are protected with sand guards.
• Bearing sleeves are provided with hardcrome platting for better life in sandy conditions.
• Rotors are painted with special epoxy paint for long life.
• NRV are provided for reduce back pressure.
• Motors are also available in single phase and three phase design.
• Motor design for wide voltage range.

• Sprinkler & drip Irrigation system.
• Irrigation in farms.
• Domestic & Industrial water supply
• Fire Fighting system.
• Solar pumping system.

Motor Shaft : Fully Stainless steel AISI 410 Pump Shaft : Fully Stainless Steel AISI 410
Stamping : Silicon steel. Suction Housing : Cast Iron FG 200 grade.
Casting Part : Cast Iron FG 200 grade. Impeller : Stainless Steel AISI 410
Thrust Bearing : Carbon v/s Stainless Steel. Diffuser : Cast Iron FG 200 grade
Copper : E.C. grade min 99.90% Sleeve : AISI 410 with hard chrome plating

• Head Range : A) Radial Flow - 13 to 245 meterB) Mix Flow - 9 to 216 meters
• Discharge Range : A) Radial ow - 120 to 450 LPMB) Mix FIow - 200 to 1150 LPM
• Motor Rating : 3.0 HP to 30 HP in three phase. - 380V /415V, 50Hz, AC Supply3.0 HP to 5.0 HP in single phase. - 230V, 50HZ, AC Supply
• Voltage Range : 160V to 250V (1 Phase)200V to 440V (3 Phase)

• Motor design for wide voltage range.
• All the rotating parts are balance in precision grade to reduce vibration & noise.
• Pumps are Design for maximum water discharge.
• Rotor are painted with special epoxy paint for long life.
• Pumps are provided with suction guide support.
• All Bearing sleeves are provided with hard crome platting.
• Carbon V/S Stainless steel thrust bearing are provided to withstand high thrust load.
• Top and suction guide bushes are well protected by sand guards.
• Winding wires are wrapped with superior polymer to withstand wide voltage uctuation.
• Upper thrust provision provided in each model.

• High rise buildings
• Commodity water supply.
• Hotels, Dairies and bungalows
• Irrigation/Sprinkler

Copper : E.C. grade min 99.90% Pump Shaft : Fully Stainless Steel AISI 410
Stamping : Silicon steel. Suction Housing : Cast Iron FG 200 grade.
Casting Part : Cast Iron FG 200 grade. Impeller : Stainless Steel AISI 410 / Glass filled engineering polymer.
Thrust Bearing : Carbon v/s Stainless Steel. Diffuser : Cast Iron FG 200 grade
Motor Shaft : Fully Stainless steel AISI 410 Sleeve : AISI 410 with hard chrome plating

• Head Range : 9 to 120 meter
• Discharge Range : 600 to 1700 LPM
• Motor Rating : 3.0 HP to 30 HP in three phase. - 380V /415V, 50Hz, AC Supply3.0 HP to 5.0 HP in single phase. - 230V, 50HZ, AC Supply
• Voltage Range : 160V to 250V (1 Phase)200V to 440V (3 Phase)

Terao brand makes highly efficient durable and best Quality V8 submersible pumpset with water filled submersible motors.

• All pumps are provided with suction guide support.
• All the rotating parts are balance in precision grade to reduce vibration & noise.
• All Bearing sleeves are provided with hard crome plating.
• Winding wires are wrapped with superior polymer to withstand wide voltage fluctuation.
• Motor design for wide voltage range.
• All guide bushes are protected with sand guards.
• Carbon V/S Stainless steel thrust bearing are provided to withstand high thrust load.
• Pumps are Design for maximum water discharge.
• Upper thrust provision provided in each model.
• Rotor are painted with special epoxy paint for long life.

• Commodity water supply.
• Irrigation/Sprinkler
• Industrial
• High rise buildings
• .

Casting Part : Cast Iron FG 200 grade. Impeller : Stainless Steel AISI 410
Stamping : Silicon steel. Diffuser : Cast Iron FG 200 grade.
Motor Shaft : Fully Stainless steel AISI 410 Suction Housing : Cast Iron FG 200 grade.
Thrust Bearing : Carbon v/s Stainless Steel. Pump Shaft : Fully Stainless Steel AISI 410
Copper : E.C. grade min 99.90% Sleeve : AISI 410 with hard chrome plating

• Head Range : 10 to 112 meter
• Discharge Range : 600 to 2200 LPM
• Motor Rating : 3.0 HP to 25 HP in three phase. - 380V /415V, 50Hz, AC Supply3.0 HP to 5.0 HP in single phase. - 230V, 50HZ, AC Supply
• Voltage Range : 160V to 250V (1 Phase)200V to 440V (3 Phase)