Our Products #5879207

Terao brand makes highly efficient durable and best Quality V8 submersible pumpset with water filled submersible motors.

• All pumps are provided with suction guide support.
• All the rotating parts are balance in precision grade to reduce vibration & noise.
• All Bearing sleeves are provided with hard crome plating.
• Winding wires are wrapped with superior polymer to withstand wide voltage fluctuation.
• Motor design for wide voltage range.
• All guide bushes are protected with sand guards.
• Carbon V/S Stainless steel thrust bearing are provided to withstand high thrust load.
• Pumps are Design for maximum water discharge.
• Upper thrust provision provided in each model.
• Rotor are painted with special epoxy paint for long life.

• Commodity water supply.
• Irrigation/Sprinkler
• Industrial
• High rise buildings
• .

Casting Part : Cast Iron FG 200 grade. Impeller : Stainless Steel AISI 410
Stamping : Silicon steel. Diffuser : Cast Iron FG 200 grade.
Motor Shaft : Fully Stainless steel AISI 410 Suction Housing : Cast Iron FG 200 grade.
Thrust Bearing : Carbon v/s Stainless Steel. Pump Shaft : Fully Stainless Steel AISI 410
Copper : E.C. grade min 99.90% Sleeve : AISI 410 with hard chrome plating

• Head Range : 10 to 112 meter
• Discharge Range : 600 to 2200 LPM
• Motor Rating : 3.0 HP to 25 HP in three phase. - 380V /415V, 50Hz, AC Supply3.0 HP to 5.0 HP in single phase. - 230V, 50HZ, AC Supply
• Voltage Range : 160V to 250V (1 Phase)200V to 440V (3 Phase)

• Motor design for wide voltage range.
• All the rotating parts are balance in precision grade to reduce vibration & noise.
• Pumps are Design for maximum water discharge.
• Rotor are painted with special epoxy paint for long life.
• Pumps are provided with suction guide support.
• All Bearing sleeves are provided with hard crome platting.
• Carbon V/S Stainless steel thrust bearing are provided to withstand high thrust load.
• Top and suction guide bushes are well protected by sand guards.
• Winding wires are wrapped with superior polymer to withstand wide voltage uctuation.
• Upper thrust provision provided in each model.

• High rise buildings
• Commodity water supply.
• Hotels, Dairies and bungalows
• Irrigation/Sprinkler

Copper : E.C. grade min 99.90% Pump Shaft : Fully Stainless Steel AISI 410
Stamping : Silicon steel. Suction Housing : Cast Iron FG 200 grade.
Casting Part : Cast Iron FG 200 grade. Impeller : Stainless Steel AISI 410 / Glass filled engineering polymer.
Thrust Bearing : Carbon v/s Stainless Steel. Diffuser : Cast Iron FG 200 grade
Motor Shaft : Fully Stainless steel AISI 410 Sleeve : AISI 410 with hard chrome plating

• Head Range : 9 to 120 meter
• Discharge Range : 600 to 1700 LPM
• Motor Rating : 3.0 HP to 30 HP in three phase. - 380V /415V, 50Hz, AC Supply3.0 HP to 5.0 HP in single phase. - 230V, 50HZ, AC Supply
• Voltage Range : 160V to 250V (1 Phase)200V to 440V (3 Phase)

• High efficient investment casting process diffusers are use with AISI 304 Material.
• All the rotating parts are balance in precision grade to reduce vibration & noise.
• All guide bushes are protected with sand guards.
• Upper thrust provision provided in each model.
• All pumps are provided with suction guide support.
• All Bearing sleeves are provided with hard crome platting.
• Carbon V/S Stainless steel thrust bearing are provided to withstand high thrust load.
• Pumps are Design for maximum water discharge.
• Winding wires are wrapped with superior polymer to withstand wide voltage fluctuation.
• Rotors are painted with special epoxy paint for long life.

• Irrigation/Sprinkler
• Commodity water supply
• Industrial
• High rise buildings
• Sprinklers

Motor Shaft : Fully Stainless steel AISI 410 Diffuser : SS 304 investment Casting
Stamping : Silicon steel. Pump Shaft : Fully Stainless Steel AISI 410
Casting Part : Cast Iron FG 200 grade. Suction Housing : Cast Iron FG 200 grade.
Thrust Bearing : Carbon v/s Stainless Steel. Impeller : Stainless Steel AISI 410
Copper : E.C. grade min 99.90% Sleeve : AISI 410 with hard chrome plating

• Head Range : 10 to 450 meter
• Discharge Range : 40 to 780 LPM
• Motor Rating : 3.0 HP to 30 HP in three phase. - 380V /415V, 50Hz, AC Supply3.0 HP to 5.0 HP in single phase. - 230V, 50HZ, AC Supply
• Voltage Range : 160V to 250V (1 Phase)200V to 440V (3 Phase)

Teraflo brand makes highly efficient best Quality water filled submersible pumpset.

• International NEMA spline coupling.
• Thrust Bearing used with resigns impregnated carbon v/s SS segments to ensure thrust load.
• Impeller & Diffusers are used with glass filled engineering polymer with stainless steel wear rings.
• Specially design for low voltage application.
• Rotors are dynamically balance to minimise noise & vibration.
• Pump & motors are in fully stainless steel design.
• Rotor are painted with special epoxy paint for long life.
• All sleeves are hard chrome plated to ensure the long life in sandy condition.
• All the pumps are supply with guide bush at suction end along with sand protection.
• NRV provided for reduce the back flow.

• Domestic water supply.
• Industrial.
• Agriculture.
• Solar pumping system.
• Fountains, Garden.

Motor Shaft : Stainless steel AISI 410 / AISI 431 Impeller & Diffuser : Glass Filled engineered polymer.
Casting Part : Cast Iron FG 200 grade. Pump Shaft : Fully Stainless Steel AISI 410
Thrust Bearing : Carbon v/s stainless steel Suction Housing : Cast Iron FG 200 grade with leaded bronze guide bush.
Stamping : Silicon steel. NRV : Cast Iron FG 200
Copper : E.C. grade (99.9%) Sleeve : AISI 410 with hard chrome platting

• Head Range : 4 to 302 meter
• Discharge Range : 10 to 450 LPM
• Motor Rating : 0.5HP to 5.0HP in Single Phase -230V, 50Hz, AC Supply0.5HP to 7.5HP in Three Phase - 380V / 415V, 50Hz, AC Supply
• Voltage Range : 150V to 250V (1 Phase)200V to 440V (3 Phase)

Teraflo brand makes highly efficient durable and best Quality V5 submersible pumpset with water filled submersible motors.

• High efficient investment casting process diffusers are use with AISI 304 Material.
• All the rotating parts are balance in precision grade to reduce vibration & noise.
• All guide bushes are protected with sand guards.
• Upper thrust provision provided in each model.
• Pumps are provided with suction guide support.
• Bearing sleeves are provided with hard crome plating.
• Carbon V/S Stainless steel thrust bearing are provided to withstand high thrust load.
• Pumps are Design for maximum water discharge.
• Winding wires are wrapped with superior polymer to withstand wide voltage fluctuation.
• Rotors are painted with special epoxy paint for long life.

• Irrigation/Sprinkler
• Commodity water supply.
• Industrial
• High rise buildings
• Sprinklers
• Unshaped and crooked 6 borehole

Motor Shaft : Fully Stainless steel AISI 410 Diffuser : AISI 304 investment Casting
Stamping : Silicon steel. Impeller : Stainless Steel AISI 410
Casting Part : Cast Iron FG 200 grade. Suction Housing : Cast Iron FG 200 grade.
Thrust Bearing : Carbon v/s Stainless Steel. Pump Shaft : Fully Stainless Steel AISI 410
Copper : E.C. grade min 99.90% Sleeve : AISI 410 with hard chrome plating

• Head Range : 24 to 268 meter
• Discharge Range : 60 to 420 LPM
• Motor Rating : 3.0 HP to 15.0 HP in three phase. - 380V /415V, 50Hz, AC Supply3.0 HP to 5.0 HP in single phase. - 230V, 50HZ, AC Supply
• Voltage Range : 160V to 250V (1 Phase)200V to 440V (3 Phase)

Terao brand makes highly efficient durable and best Quality Openwell submersible pump.

• Design for wide voltage range.
• Manufactured using a much sophisticated control process to ensure reliability & Long life of the pump.
• Design for underwater Application.
• Light weight& easy to install.
• Impeller made from glass filled engineer polymer for better life.
• Full Stainless steel stator tube as well as stainless steel shaft.
• Supply with control panel.

• Domestic water supply-Apartment, Building & Hotel
• Fountains.
• Canels& Rivers
• Irrigation from openwell where water level fluctuate.
• Stator Tube : Stainless Steel / Cast Iron FG 200 Grade.
• Thrust Bearing : Carbon
• Impeller : Glass Filled engineering polymer/Cast Iron FG 200
• Pump Volute : Cast Iron FG 200 Grade.
• Head Range : 6 to 68 meter
• Discharge Range : 50 to 2344 LPM
• Motor Rating : 0.5 HP to 5 HP (Single Phase).0.5 HP to 20 HP (Three Phase).
• Voltage Range : 140V to 250V (1 Phase)200V to 440V (3 Phase)

Teraflo brand makes highly efficient durable and best Quality V3 submersible pumpset with water lled motors. Available on both outer diameter of 68mm & 74mm.

• Fully stainless steel stator tube.
• All the diffusers and impellers are glass filled engineer polymer with stainless steel wear rings.
• Rotor supply with Epoxy paint for long life and corrosion free.
• Dynamically balance rotor which give noise less & vibration free operation.
• Light weight & Easy to operate in wide voltage band.
• All parts machined on CNC to set consistent Quality performance.
• Rotor are grinded & burnished to give better surface nish value which ensure long life.
• Can be installed with HDPE/UPVE Pipes.
• Start Easily at low voltage.
• All hardware are stainless steel
• All rubber parts are which NBR

• Domestic water supply-Apartment, Building & Hotel
• Fountains, Canals & Rivers.
• Solar Application
• Domestics water supply.
• Fire Fighting System.
• Unshaped and crossed borewell.
• Replace of hand pump.

Motor Shaft : AISI 410 Bowl& Impeller : Glass Filled engineered polymer.
Casting Part : Cl FG 200 Suction& NRV : CI FG 200 grade.
Thrust Bearing : Tilting pad self alignment carbon S/S Pump Shaft : Stainless Steel AISI 410
Winding Wire : Multilayer polyester insulated Pump casing : Stainless Steel
Copper : E.C. grade (99.9%) All Hardware : Stainless Steel AISI 304

• Head Range : 6 To 109 Meter.
• Discharge Range : 10 to 90 LPM.
• Motor Rating : 0.5HP to 1.5HP, 220V, 50Hz, AC Supply
• Voltage Range : 140V to 240V

Teraflo brand makes highly efficient durable and best Quality V6 submersible pumpset with water lled submersible motors.

• Robust construction to ensure durability of pumpset.
• Winding wires are wrapped with superior polymer to withstand wide voltage fluctuation.
• All the rotating parts are dynamically balance to reduce vibration & noise.
• Carbon Bearing v/s Stainless Steel Segments are used to withstand high thrust load.
• All guide bushes are protected with sand guards.
• Bearing sleeves are provided with hardcrome platting for better life in sandy conditions.
• Rotors are painted with special epoxy paint for long life.
• NRV are provided for reduce back pressure.
• Motors are also available in single phase and three phase design.
• Motor design for wide voltage range.

• Sprinkler & drip Irrigation system.
• Irrigation in farms.
• Domestic & Industrial water supply
• Fire Fighting system.
• Solar pumping system.

Motor Shaft : Fully Stainless steel AISI 410 Pump Shaft : Fully Stainless Steel AISI 410
Stamping : Silicon steel. Suction Housing : Cast Iron FG 200 grade.
Casting Part : Cast Iron FG 200 grade. Impeller : Stainless Steel AISI 410
Thrust Bearing : Carbon v/s Stainless Steel. Diffuser : Cast Iron FG 200 grade
Copper : E.C. grade min 99.90% Sleeve : AISI 410 with hard chrome plating

• Head Range : A) Radial Flow - 13 to 245 meterB) Mix Flow - 9 to 216 meters
• Discharge Range : A) Radial ow - 120 to 450 LPMB) Mix FIow - 200 to 1150 LPM
• Motor Rating : 3.0 HP to 30 HP in three phase. - 380V /415V, 50Hz, AC Supply3.0 HP to 5.0 HP in single phase. - 230V, 50HZ, AC Supply
• Voltage Range : 160V to 250V (1 Phase)200V to 440V (3 Phase)