Chennai, Tamil Nadu, India
Verified
Add Review
Our Products
Independent Air Velocity Controlling System provide flexible processing control to easily handle various complicated lead free soldering requirements.
The paste is automatically dispensed across the entire squeegee length, maintaining at 15mm rolling diameter, adopting the common 500 gram's solder paste jar. completely eliminates the wastage of solder paste overflowing to the sides of squeegee.
Tracing solder paste rolling diameter in real time and trigger the auto dispensing if it falls below 10mm. Completely eliminate insufficient solder paste on stencil and keep the paste rolling speed within optimum range to achieve best printing result
Using panel light installed at the top and CCD camera below to inspect the clogging of stencil aperture to eliminates poor quality stencil being used, ensure quality printing right from the start.
Tracing solder paste rolling diameter in real time and trigger the auto dispensing if it falls below 10mm. Completely eliminate insufficient solder paste on stencil and keep the paste rolling speed within optimum range to achieve best printing result
With SPI close-loop system, machine will automatically adjust and correct the print deposits based on the feedback given with regards to poor printing quality. This will facilitate improved print quality and production efficiency, by forming a complete printing feedback system.
Attached on CCD camera XY axis, the dispenser provides basic function of glue dotting using syringe type dispensing needle after solder paste printing.
Handling M size board, G-Star is adept at delivering all your business needs. it successfully attained 01005 miniature printing. Through full contact with the stencil, our improved cleaning system ensure that any remaining paste in the mesh will be eliminated before printing. The 2D paste inspection function is able to detect insufficient paste, bridging and other defects. G-Star is also equipped with top and motorized side clamp, thereby ensuring superior printing quality.
Options| Paste Rolling Diameter Monitoring System |
| Stencil Apertures Inspection System |
| Auto Table Adjustment for PCB Thickness |
| SPI Closed - loop |
| External Barcode Scanner for PCB traceability |
| Handheld Barcode Scanner for stencil, solder paste, squeegee traceability |
| Offering inspection speeds of up to 200 cm2/sec, the TR7007 SII is the fastest solder paste inspection system in the industry. This highly accurate inline shadow-free solder paste inspection solution offers full 3D inspection at resolutions of 15 m or 10 m. Built on a high precision linear motor platform, the systems hallmark features include closed loop function, enhanced 2D imaging, autowarp compensation and fringe pattern technology. Increase capacity without sacrificing additional space with an available dual-lane configuration. SPI Key Features
|
Additional Information:
Payment Terms : L/C, T/T
Built upon latest 3D projection technology, the TR7007Q SPI offers industry leading inspection accuracy for the most demanding applications. The inline inspection system automatically optimizes the inspection route for best performance, and TRIs innovative SmartWarp system compensates for any board warpage during inspection. With a choice of quad/dual projector inspection, the TR7007Q is a versatile SPI solution bringing accuracy and speed to your fingertips.
Key Features
| Built around the successful and reliable TR518 series platform, the TR518 SII MDA now provides its excellent performance combined with friendly Windows 7 user interface design and USB interface connection to test PC or notebook. With up to 2560 analog test points, TestJet technology and many other features, the TR518 SII delivers high speed, high accuracy and high reliability testing. ICT Key Features
|
The industry's only programming solution that offers both the fastest programming speeds with true universal device support.
| Featuring advanced automated 3D X-ray inspection of PCBAs, the TR7600 SII high speed scanning with multiple resolutions in a single program. Automatic Pass/Fail determination uses 2D + 3D images provided using 6-axis control and ultra-high-speed multiple angle cameras with automatic board warp compensation. TR7600 SII is ideal for inspection of fine pitch 01005 components, BGAs, 2/3-layer PoPs, LGAs and other bottom termination components on both sides of the PCBA, including complex Pressfit connectors. |
Additional Information:
Payment Terms : L/C, T/T
Delivery Time : 8 weeks
INTRODUCTION
| TRIs optimum 3D AOI solution delivers the fastest multi-angle PCB inspection coupled with blue-laserbased true 3D profile measurement for the highest automated optical defect symptoms coverage possible. Combining state-of-the-art software solution and third generation intelligent hardware platform, the TR7500 SIII 3D offers robust 3D solder and component defect inspection and with high inspection coverage and easy programming. AOI Key Features
|
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Wooden box packing , ready to ship via Air/Sea
As the grade is getting more and more involved in industry 4.0. It is understood that customers are also expecting to transform their operations, yielding higher productivity and competitiveness. Strategically armed with OPC (Optimum-Paste Control). G-Titan makes your journey towards Lights - out manufacturing a seamless one.
Complemented with QPC (Quality - Print Control), G - Titan stands firmly with the belief that nothing is more important than a good print. These revolutionary changes of the fundamental aspects of SMT printers, will bring about a kind of efficiency that you've never had.
| Applied to load the PCB form magazines one by one the downstream machine (such as printers) or unhold & storage the PCBs from upstream machine. Features
|
| Items | Description | HLD - 400B / HULD - 400B | HLD - 400C / HULD - 400C | HLD - 400D / HULD - 400D | HLD - 460C / HULD - 460C |
|---|---|---|---|---|---|
| 1 | Dimension L x W x H(mm) | HLD: 1125*765*1250 | HLD: 1335*845*1250 | HLD: 1505*910*1250 | HLD: 1860*970*1250 |
| HULD: 1550*765*1250 | HULD: 1860*845*1250 | HULD: 2060*910*1250 | HULD: 2330*970*1250 | ||
| 2 | Weight(Kg) | HLD: 180Kg | HLD: 210Kg | HLD: 240Kg | HLD: 280Kg |
| HULD: 200Kg | HULD: 230Kg | HULD: 260Kg | HULD: 290Kg | ||
| 3 | Power Supply | 1 Phase. 220V AC 50/60Hz | |||
| 4 | Total Power | HLD: 225W HULD: 240W | HLD: 255W HLD: 270W | HLD: 275W HLD: 290W | |
| 5 | Air Supply | 5 - 7 Kg/cm2 | |||
| 6 | PCB Max. Size (L*W) | 330* (60 - 250) (mm) | 400* (60 - 330) (mm) | 525* (60 - 400) (mm) | 530* (60 - 460)(mm) |
| Magazine Size (mm) | 355*320*565 | 400*460*565 | 535*460*565 | 535*530*565 | |
| 7 | Conveyor Height | 900+/-20 (mm) | |||
| 8 | PCB Flow Direction | Left to Right (Or Right to Left) | |||
| 9 | Step Pitch Setting | 10,20,30,40,50 (mm) | PLC + Touch Screen Panel | ||
| 10 | Control Method | 10,20,30,40,50 (mm) | PLC + Touch Screen Panel | ||
| 11 | Pusher | SMC Cylinder | |||
| 12 | SMEMA Interface | Standard | |||
| 13 | Export Vacuum Package | Standard | |||
| Applied to connect the upstream & downstream line of SMT machines with linking & inspection function. |
