Our Products
The Truck mounted Scissor work Platform is a comprehensively equiped under-bridge access and work platform, mounted on a diesel powered truck, suppled with an optional silenced 20/30 KW diesel generator set, 110/220 volt, is suitable for power tools & job site lighting.
Hydraulic Power Pack | : | Compact system consists of DC motor, Gear pump (Dowty), Solenoid DC valve (Yuken/Atos) Pressure control valve (Polyhydron) Pilot operated check valve (Polyhydron), Suction strainer, Breather filler, Oil level indicator with sight glass and Oil tank. The power pack is controlled by push button. |
---|---|---|
Hydraulic Cylinder | : | Ground and hard chrome plated piston rod fitted with seamless honed tubes. |
Seals | : | Polyurethane with back ring. |
Main Structure | : | The base and structure are made from rolled / pressed. Scissors are made of tubular rectangular pipes of suitable section for tortional rigidity yet light in weight section with self lubricating bushes. The complete structure is consist of maximum horizontal and longitudinal stability and minimum deflection. |
Brakes | : | The platform is Raised/Lowered, Forward / Reverse & Steering arrangement by two numbers hydraulic cylinders operated by a power pack system from top platform. Push button is used to lower, raise, forward, reverse, left-right turn and stop the platform at any height. |
Bearings | : | Life time self lubricating bearings at scissors assembly, pivot points and two nos. Sealed ball bearings provided in rollers. |
Ladder | : | Fixed on frame to reach lowered platform. |
Wheels | : | Structure is based on four Nos. Heavy duty rubber coated wheels of 400 mm Ø x 100 mm face fitted with two nos. Sealed ball bearing for less tractive effort. |
Hoses | : | Double wire braided hydraulic hose with universal connections. |
Finish | : | Complete Unit is painted with one coat of primer and two coats of safety Yellow enamel paint. |
Hydraulic Power Pack | : | Compact system consists of DC motor, Gear pump (Dowty), Solenoid DC valve (Yuken/Atos) Pressure control valve (Polyhydron) Pilot operated check valve (Polyhydron), Suction strainer, Breather filler, Oil level indicator with sight glass and Oil tank. The power pack is controlled by push button. |
---|---|---|
Hydraulic Cylinder | : | Ground and hard chrome plated piston rod fitted with seamless honed tubes. |
Seals | : | Polyurethane with back ring. |
Main Structure | : | The base and structure are made from rolled / pressed. Scissors are made of tubular rectangular pipes of suitable section for tortional rigidity yet light in weight section with self lubricating bushes. The complete structure is consist of maximum horizontal and longitudinal stability and minimum deflection. |
Brakes | : | The platform is Raised/Lowered, Forward / Reverse & Steering arrangement by two numbers hydraulic cylinders operated by a power pack system from top platform. Push button is used to lower, raise, forward, reverse, left-right turn and stop the platform at any height. |
Bearings | : | Life time self lubricating bearings at scissors assembly, pivot points and two nos. Sealed ball bearings provided in rollers. |
Ladder | : | Fixed on frame to reach lowered platform. |
Wheels | : | Structure is based on four Nos. Heavy duty rubber coated wheels of 400 mm Ø x 100 mm face fitted with two nos. Sealed ball bearing for less tractive effort. |
Hoses | : | Double wire braided hydraulic hose with universal connections. |
Finish | : | Complete Unit is painted with one coat of primer and two coats of safety Yellow enamel paint. |