Manesar, Haryana, India
Our Products
Our Heating elements for Rice Cookers.
Our Heating elements for Toasters.
Focusing on our strategy of being a component provider to the Appliance manufacturers, Theeta also makes Rod Thermostats for Storage Water Heaters for domestic and export consumption. The Thermostats are made at the first BEAB approved plant in India located at Manesar, Haryana. These are sold mainly in the UK to major OEMS
Suitable for domestic Storage Water Heaters, Immersion Heaters, Domestic and Chemical systems. Designs available for Domestic and International market.
Our Heating elements for Dryers:
Circulation Heaters- also known as Inline Heaters are used where transitional heating is required while maintaining the flow rate . Circulation heaters are better than using external source such as heat exchangers as the losses are minimal because of direct heating.
Skid Heaters- In case the heating is required in stages using multiple vessels Skid heaters are used. In such a case the outlet of 1 vessel becomes inlet for the other. The number of vessels generally range from 2 to 8 vessels either placed horizontally or vertically.
With selection of KW ratings, sizes, terminal enclosures, sheath material, these Circulation and Skid heaters can be designed for wide range of heating mediums, tube or tank sizes, and temperatures.
LPG Gas Vaporizer Elements -are made out of Copper tube duly Nickel plated and supplied with 2 or 3 Reverse (Double threaded) Flange, Washer and Check Nut. Flameproof terminal box are also available with these heaters. Available in 6 KW, 9KW, 12 KW, 15 KW and 18 KW. Suitable for Gas Vaporizers
Skid Heaters- In case the heating is required in stages using multiple vessels Skid heaters are used. In such a case the outlet of 1 vessel becomes inlet for the other. The number of vessels generally range from 2 to 8 vessels either placed horizontally or vertically.
With selection of KW ratings, sizes, terminal enclosures, sheath material, these Circulation and Skid heaters can be designed for wide range of heating mediums, tube or tank sizes, and temperatures.
APPLICATIONS
We manufacture heaters for hazardous and explosive atmospheres. These heaters come with Flameproof or explosion proof terminal boxes. These terminal boxes are CMRI approved for different temperature or area ratings as asked by customer. All heaters can also be provided with Control panels.
These are type of heating bundles or units made to fit in directly with the duct used in building for comfort heating or process heating. Duct heaters can be used in applications to heat air and gases. Duct heaters are available in 3 fittings and they are
Finned tube duct heaters: Apart from regular tubular heater, finned tubular heater can also be provided in flanged or modular duct fitting. These are duct heaters comprising of bundled finned tubular heaters.
Fins are wound on the tubular heaters so as to provide higher surface area for the air to come in contact with thereby increasing the efficiency of the air or gas heating. The flanges are customised to ensure easy installation and Maintenance.The heaters can be customised for any duct size and required temperature.
Theeta is well equipped design the duct heaters for the customers. From 2d to 3d designs, to KW calculation, correct watt density, tube and flange selection etc can also be designed by Theeta engineers.
APPLICATIONS
ESP Hopper heaters
Hoppers are part of ESP and are located at the bottom of ESP. The function of hopper heater is to heat the hopper so as toPrevents moisture to condensate from getting collected in itRemoves fly ash from precipitator
Hopper heaters can be provided with reflector plates for efficient heating in the hopper
ESP Shaft and Insulator heaters
Shaft and Insulator heater: These heaters are provided at the shaft and insulator to maintain the temperature above dew point i.e. between 80-120 deg C. If temperature falls below the range as as above there will be a continuous tracking of electrical field over the surface of insulator which will result into damage of insulator and non availability of field for collecting the fly ash.
Our Heating elements for Hookah Water Pipes
Our Heating elements for OTG Tandoors.
Our Heating elements for Kitchen Equipments .
Our Heating elements for Water Dispensers
Our Heating elements for Pizza bread Ovens
Our Heating elements for Microwave.
Our Heating elements for Refrigeration.
Our Heating elements for Cooking Range / Hot Plate:
Our Heating elements for Chapati Makers.
Our Heating elements for Washing Machines.
Made out of SS Tube. Available in various wattages. Designed as per customers specifications.
Our Heating elements for Solar Heaters.
