Our Products
WITH VELOCITY MONITOR 132 (WITH NEW FEATURES)
`Thermo’ Stack Sampler is one such Grab Sampler which can monitor Particulate Matter (PM) and any water – soluble gaseous pollutants like SO2, NOx, HF, Cl2 , H2S, NH3 etc. in industrial emissions from Stationary source/Chimney and Vent.
In this system - all accessories are in One Box (Pitot, Probe Pipe, Thimble Holder, Dry Gas Meter, Nozzles, Tools etc., all accommodated in an Aluminium Carrying Case (except Vacuum Pump Assembly) as shown in picture. Light weight, Easily carry here & there (like a suitcase)
Velocity and Temperature separately also provided in this system. Save our Time for sampling
`Thermo’ Stack Sampler is one such Grab Sampler which can monitor Particulate Matter (PM) and any water – soluble gaseous pollutants like SO2, NOx, HF, Cl2 , H2S, NH3 etc. in industrial emissions from Stationary source/Chimney and Vent.
`Thermo’ Stack Sampler is one such Grab Sampler which can monitor Particulate Matter (PM) and any water – soluble gaseous pollutants like SO2, NOx, HF, Cl2 , H2S, NH3 etc. in industrial emissions from Stationary source/Chimney and Vent.
In this system - all accessories are in One Box (Pitot, Probe Pipe, Thimble Holder, Dry Gas Meter, Nozzles, Tools etc., all accommodated in an Aluminium Carrying Case (except Vacuum Pump Assembly) as shown in picture. Light weight, Easily carry here & there (like a suitcase)
The increasing awareness of health hazards to due to industrial pollution impact specifically for industrial workers, there is a requirement to measure the health hazards in work zone monitoring for assessment of exposure of hazardous substances at work place. Thermo Handy Sampler TEI-HS-171 has been developed to fulfill such kind of monitoring needs. TEI-HS-171 instrument is operate by pump to draw air thorough a suitable absorption solution contained in an impingers (03 impingers can be used in series) to monitor 3 gaseous pollutants. There is an additional provision to determine particulate matter as well by using the open sampling head which takes 37mm diameter filters. This instrument can be used to monitor pollutants including oxides of sulphur and nitrogen, halogens, ammonia, sulphides, etc. The particulate sampling head provided with the system would be useful for monitoring particulates like silica, cement dust, metal fumes, asbestos fibers, etc. in work areas of cement plants, foundries, etc.
Main Features :
Technical Specification
Power Supply | 220V (+/-) 10V AC, 50Hz |
---|---|
Sampling Rate | 0.1 – 10 LPM |
Suction Pump | Built-in Rotary vane type. |
Timer | Adjustable timer as per method requirement. |
Running Time | 1 – 24 Min. |
Delay Time | 1 – 7 Min. |
Operation Time | 6 - 8 hours |
Equipment specially to monitor Dioxins & Furan emissions with Normal Stack Monitoring facilities like PM, Sox, NOx etc.
This model is equipped with Digital Manometer which display velocity and Temperature indicator which helps to use this in isokinetic stack sampling. This can also be used in monitoring of Heavy Metals in Stack Emission