Other Products / Services #137693

• Injection moulded one piece construction.
• Made form special grade polyurethane composition in Red colour.
• Can be applied to any instrument for locking out.
• Each hasp accommodates up to three locks.

• Scientifically made moulded section of PVC
• Incorporating solid steel die cut insert for holding the Vinyl coated galvanized steel cable.
• Galvanized steel cable with stand more than 100 Kg weight
• Can be used for number of applications.

Simple, accurate calibration is easy with these economical, all-in-one kits. Choose from 14 different types for sensor and instrument calibration. Kits include zero and span cylinders, regulators, tubing, accessories and instructions. All kits housed in a lightweight carrying case, making it convenient to carry everything directly to the sensor location or job site.

The precision-crafted MSA FlameGard 5 UV/IR-H2 Flame Detector monitors the ultraviolet and infrared spectral ranges to detect unwanted hydrogen fires. Its meticulous engineering and usage of UV and IR make it highly immune to false alarms caused by lightning, arc welding, hot objects and other sources of radiation. The unit's continuous Optical Path Monitoring (COPM) checks both the optical path integrity and the detector's electronic circuitry once a minute, while the wide field of view enables greater fire detection coverage.

Advanced design and innovative features make the 9010 and 9020 Controllers the top choice for gas-warning systems, monitoring up to 20 channels. The 9010 Controller operates with one independent sensor, while the 9020 operates with two independent sensors per control module. Each module comes with an independent AC/DC power supply for increased system reliability. Both units feature full internal diagnostics, which minimize false alarms and unexpected down time. The controllers can also power remote sensors, while the large four-digit LCD and LED provide such crucial information as gas concentration, alarm status and more. A convenient RS-485 serial interface offers handy printer connection to make a record of data, while a customized transmission protocol Modbus RTU can record serial bus data transmission such as system configuration, gas concentration, alarm and failure events.

Built for safety programs that demand gas concentration measurement before allowing entrance to an area, the Ultima X Sampling Module is exclusively designed to work with the Ultima X Gas Monitor. The unit features an explosion-proof design and reliably extracts a sample from any confined or inaccessible areaor any area that is too hot, cold, or otherwise harshand delivers gas concentration reading directly to the installed gas monitor.

The modular design of the SUPREMATouch Fire and Gas Detection System meets the requirements of a diverse range of industries and applications, while complying with all relevant global safety standards. The system builds on the success of the original innovative SUPREMA Control System design and features a large color touchscreen display, enhanced processing capabilities, and optional integration of addressable fire and smoke detectors. It can be used with a wide range of detectors, including combustible and toxic gas, oxygen, smoke, fire and heat. Output options include relay, and analog and digital communication between racks, which allows interfacing to external systems using ModBus or Profibus.The SUPREMATouch Systems modularity enables a variety of fire & gas detection configurations that meet the requirements of virtually any application, including redundant systems with up to a Safety Integrity Level (SIL) 3 rating (IEC 61508).

Capable of detecting refrigerant gas down to 1ppm, the Chillgard RT Refrigerant Monitor is purpose-built to monitor up to eight remote areasand is completely configurable to detect either a specific refrigerant or group of refrigerant gases.

With its high-energy broadband radiation source, the battery-operated FlameGard 5 Test Lamp is precision-designed to test MSA's FlameGard 5 MSIR, UV/IR, and UV/IR-H2 Flame Detectors. The rechargeable test lamp provides a radiation source that emits sufficient energy in both the ultraviolet and infrared spectra to activate UV and/or IR flame detectors. A variety of flashing test patterns allow the test lamp to check the operation of MSA flame detectors.

With its compact design and low-maintenance engineering, the Chillgard M-100 Refrigerant Sensor is easily mounted almost anywhere for trusted detection of halogenated refrigerant across a wide range of temperatures and humidity rangeswith a minimum detection level of 20ppm.

The Ultima Controller is purpose-designed and built to provide complete access to all advanced features of the Ultima and Ultima X Gas Monitors, as well as the Toxgard II Gas Monitor. Via its full-function and password-protected keypad, users can set the real time clock, set alarm levels, change span-gas values, display date of last calibration, display minimum, maximum and average gas values, change address and set future calibration time/date in addition to providing basic calibration functions

The economical, efficient MultiGard Gas Sampling System uses auto-standardization and flexible sample point order to analyze gas from up to 32 locations. Maintenance and calibration are made easy because all the work is performed at a single location, while also ensuring personnel don't have to enter the monitored area. The unit directly connects to Allen-Bradley's (AB) Ethernet or Data Highway Plus networks, which allows communication to other equipment or controllers. The system also has an "internet-connect" option, which allows secure viewing at one's personal computer. The screen provides easy-access scroll-down menus and visual indicators of sensor condition.

The stable, durable Chemgard Photoacoustic Infrared Gas Monitor is purpose-built and detects minute amounts of a wide variety of gases. Three different enclosure styles ensure there is a configuration for wildly different situations. The instrument typically draws the gas sample via an internal pump, which allows the unit to be mounted in a convenient location if the area to be monitored is inaccessible. The unit can be expanded to monitor up to 8 locations, while an easy-to-read display shows gas concentrations and 3 levels of alarms.

Get continuous monitoring of methane, propane, and other combustible gases with this open path infrared detector. Provides 4-20 mA analog signals, as well as digital display and relay contacts. Digital display and adjustable mounting arms ensure easy alignment. Factory calibrated for low-maintenance operation.

The Ultima Controller is purpose-designed and built to provide complete access to all advanced features of the Ultima and Ultima X Gas Monitors, as well as the Toxgard II Gas Monitor. Via its full-function and password-protected keypad, users can set the real time clock, set alarm levels, change span-gas values, display date of last calibration, display minimum, maximum and average gas values, change address and set future calibration time/date in addition to providing basic calibration functions

Sentinel Series HeadgearThe ultimate value in lightweight, comfortable face protection. All Sentinel Series headgear include two sizing features for enhanced comfort. The Sure-Lock ratchet adjusts the headband to sizes 6 1/2 to 8, and it will not slip from the selected size. The crown strap conforms to the shape of the head. The browpad, made of Sportek and offered exclusively by Bullard, pulls moisture away from the skin, creating a drier, more comfortable fit. Browpads are hand washable and replaceable. Sentinel easily accommodates both primary eye protection and half-facepiece style respirators.