Mumbai, Maharashtra, India
Our Product / Services
TorqBoltis one of the oldest manufacturer, distributors, stockists & suppliers of ASTM A193 Stainless Steel Washer, available in a variety or grades, materials, and finishes. Torqbolt is own by a group of companies, dealing in manufacturing ofSteel Bolts, Steel Nuts, Steel Washers, Steel Screws.Our Fastener division known asTorqboltspecializing inStainless ASTM A193 Stainless Steel Washer We Manufacture, Stock & Supply all kind ofASTM A193 Stainless Steel Washerin all sizes at best price. There are three majorSteel Fastenersused in industries:Stainless Steel Fasteners, Carbon Steel Fasteners, andAlloy Steel Fasteners.
The most preferred grade used instainless Steel fasteners: is Series 200, 300 & 400. We also have huge stockofDuplex Stainless Steel Fasteners&QualityASTM A193 Stainless Steel Washer.TorqBolttake care of requirments of their clients & make sure their allSteel Bolts, Steel Nuts, Steel Washers, Steel Screws, Steel Fastenersin order as per client requirement before dispatch
| ASTM A193 Stainless Steel Washer | ||||
|---|---|---|---|---|
| Material | Nuts Size | Length | Standard & Specification | ASTM A193 Stainless Steel Washer Manufacturer |
|
M02 to M33 |
3 mm to 200 mm |
|
|
| ASTM A193 Stainless Steel Washer Note:- | ||||
|---|---|---|---|---|
| Stainless Steel ASTM A193 Stainless Steel Washer in Grade: |
|
|
|
|
| Type of Stainless Steel Nuts: |
|
|||
| In Form of: |
|
|||
| Head drive | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc. | |||
| Other Services | Hot Dip Galvanizing, Phosphate, Teflon, Xylon Coated, PTFE Coated Nuts, Zinc & Cadmium Plated | |||
| Origin and service-region: | EuropeanOrigin of ASTM A193 Stainless Steel Washer are Western European. However projects with eastern origin are possible on request. | |||
| TEST CERTIFICATE | Manufacturer Test Certificate as per EN 10204 / 3.1 | |||
| Packing & Shipping |
|
|||
ASTM A193 Stainless Steel Washer Price
| Fasteners Type | Latest Price | Stock | Send Enquiry |
|---|---|---|---|
| ASTM A193 Stainless Steel Washer | US $0.001-10 / Piece |
Email: order@torqbolt.com Or Fill Quick Inquiry Form |
| Grade | Size | Tensile ksi, min | Yield, ksi, min | Elong, %, min | RA % min |
|---|---|---|---|---|---|
| B7 | Up to 2-1/2 | 125 | 105 | 16 | 50 |
| 2-5/8 – 4 | 115 | 95 | 16 | 50 | |
| 4-1/8 – 7 | 100 | 75 | 18 | 50 | |
| B8 Class 1 | All | 75 | 30 | 30 | 50 |
| B8M Class 1 | All | 75 | 30 | 30 | 50 |
| B8 Class 2 | Up to 3/4 | 125 | 100 | 12 | 35 |
| 7/8 – 1 | 115 | 80 | 15 | 35 | |
| 1-1/8 – 1-1/4 | 105 | 65 | 20 | 35 | |
| 1-3/8 – 1-1/2 | 100 | 50 | 28 | 45 | |
| B8M Class 2 | Up to 3/4 | 110 | 95 | 15 | 45 |
| 7/8 – 1 | 100 | 80 | 20 | 45 | |
| 1-1/8 – 1-1/4 | 95 | 65 | 25 | 45 | |
| 1-3/8 – 1-1/2 | 90 | 50 | 30 | 45 |
| Grade | Size | Tensile ksi, min | Yield, ksi, min | Elong, %, min | RA % min |
|---|---|---|---|---|---|
| B7 | Up to 2-1/2 | 125 | 105 | 16 | 50 |
| 2-5/8 – 4 | 115 | 95 | 16 | 50 | |
| 4-1/8 – 7 | 100 | 75 | 18 | 50 | |
| B8 Class 1 | All | 75 | 30 | 30 | 50 |
| B8M Class 1 | All | 75 | 30 | 30 | 50 |
| B8 Class 2 | Up to 3/4 | 125 | 100 | 12 | 35 |
| 7/8 – 1 | 115 | 80 | 15 | 35 | |
| 1-1/8 – 1-1/4 | 105 | 65 | 20 | 35 | |
| 1-3/8 – 1-1/2 | 100 | 50 | 28 | 45 | |
| B8M Class 2 | Up to 3/4 | 110 | 95 | 15 | 45 |
| 7/8 – 1 | 100 | 80 | 20 | 45 | |
| 1-1/8 – 1-1/4 | 95 | 65 | 25 | 45 | |
| 1-3/8 – 1-1/2 | 90 | 50 | 30 | 45 |
Bowed Spring washers are another sub type for Spring Washers manufactured at Alloy Fasteners in materials like Stainless Steel, Carbon Steel, Alloy Steel, High tensile Alloy Steel, Copper & Copper Alloy, Aluminum Bronze, Silicon Bronze, Nickel Alloys like Inconel, Monel, Incoloy, Hastelloy, Alloy 20, AISI 904L Etc.These Bowed Spring Washers are offered with desired surface finishing.
| DIN/ISO STANDARDS FOR SPRING/SPLIT/LOCK WASHERS | |||||
| DIN 127 | DIN 128 | DIN 137 | DIN 6796 | ||
| DIN 6905 | DIN 6908 | DIN 7980 | JIS B1251 | ||
Spring Washers a.k.a Split Washers is a ring split at one point and bent into a helical shape. This causes the washer to exert a spring force between the fastener's head and the substrate, which maintains the washer hard against the substrate and the bolt thread hard against the nut or substrate thread, creating more friction and resistance to rotation.We Manufacture Spring Washers in vareity of material including Stainless Steel, Alloy Steel, Carbon Steel, low Carbon Steel, Copper & Copper Alloys, Nickel Based Alloys & other special alloys on request.
We Manufacturer premium quality standard & customized washers from various metals & metal alloys as per ASTM/ASME/DIN/DIN Standards & Specifications.We produce all types of washers in almost all shapes & sizes.We also provide passivation, quality coating further processing as per client's requirement.
Conical Spring Washers are manufactured at Alloy Fasteners as per DIN 6796 & DIN 2093 in Materials like Stainless Steel, Alloy Steel, Carbon Steel, High Tensile Alloy Steel, Copper & Copper Alloy, Aluminum Bronze & other nickel Alloys on request.We produce conical lock type, plain & serrated conical spring washers.
Plain Washers are most basic type yet widely used Washers.Plain washers depict like a shape of a plain ring.Plain washer are also referred as Flat Type Washers.We Manufacturer Plain / Flat type washers as per various ISO/DIN/JIS/ASTM Standards in different Materials viz. Stainless Steel , Nickel Alloy , Alloy Steel, Carbon Steel, Copper Nickel , Copper, Brass, Aluminum, Titanium & other Special Alloys on Request.
| DIN/ISO STANDARDS FOR PLAIN/FLAT WASHERS | |||||
| DIN 125 A (ISO 7089) | DIN 125 B (ISO 7090) | DIN 126 (ISO 7091) | DIN 9021 | AS 1252 | |
| JIS B 1256 | BS4320 A,B | BS4320 C,D | DIN 7989 | DIN 6903 | |
| IS : 2016 TABLE II | DIN 6916 | JIS B 1186 | |||
Dome shaped washers are spring washer formed with a semispherical shaped top.This design provides a high load bearing capacity and a low deflection.
Domed washers are also called as umbrella washers.
.We also provide passivation, quality coating further processing as per client's requirement.
We Produce Dome Washers from size 1/8" upto 1/2"& other on request.
Hexagonal hole washers are so devised to prevent the washer from turning relative to a hexagonal shaped shaft or rod.Alloy Fasteners manufactures & exports Hexagonal shaped washers in Stainless Steel, galvanized Steel, Alloy steel, Carbon Steel, Copper, Brass, Aluminum & Nickel Alloy Grades.We offer these hex Washers in almost all sizes & customized as per request.
We Manufacturer premium quality Square Washers , Tapered Square Washer & Bevelled Square Washers in Stainless Steel, Alloy Steel, Carbon Steel, Duplex Steel, Super Duplex Steel, Inconel, Monel Alloys, Hastelloy, Alloy 20 non ferrous material like Copper, Brass, Bronze, Aluminum, Cupro Nickel Alloys etc in all sizes.
AFender Washeris a flat washer with a large outer diameter in ratio to its central hole. These are commonly used to distribute the load on thin sheet metal, and are named after their use onautomobile fenders. Fender Washers are manufactured as per DIN 9021 standard.
Dock washers are flat washers with large bearing surface with smaller Bolt diameter & thicker than standard flat washers.These are normally used in Construction. We Manufacturer these thick dock washers Specially Low Carbon Alloy Steel, Stainless Steel, Galvanized Steel & other steel on request.
| DIMENSIONS | DOCK WASHERS | ||||
| SIZE | ID | OD | THICKNESS | WT/100PC |
| 1/2" | 1/4" | 9/16" | 3" | 22 KGS |
| 5/8" | 1/4" | 11/16" | 3" | 21.5 KGS |
| 3/4" | 1/4" | 13/16" | 3" | 21 KGS |
| 7/8" | 1/4" | 15/16" | 3" | 20.5 KGS |
| 1" | 1/4" | 1 1/16" | 3 1/4" | 24 KGS |
| 1 1/4" | 11/4"/2" | 1 3/8" | 4" | 36 KGS |
We Manufacturer premium quality standard & customized washers from various metals & metal alloys as per ASTM/ASME/DIN/DIN Standards & Specifications.We offer Tooth lock Washers in Stainless Steel & other Exotic material.We also provide passivation, quality coating further processing as per client's requirement.
TabWashersare Prominently manufactured by Alloy Fasteners in material like Stainless Steel, Copper, Brass, Bronze etc as per DIN 93, DIN 432, DIN 462, IS 8068 & BS5814 Standards. We produce all sizes & offer different coatings & surface finish as per client's requirement.
| DIN / BS / IS STANDARDS FOR TAB WASHERS | |||||
| DIN 93 | DIN 432 | DIN 463 | BS5814 | IS 8068 | |
Hexagonalholewashersare so devised to prevent the washer from turning relative to a hexagonal shaped shaft or rod.Alloy Fasteners manufactures & exports Hexagonal shaped washers in Stainless Steel, galvanized Steel, Alloy steel, Carbon Steel, Copper, Brass, Aluminum & Nickel Alloy Grades.We offer these hex Washers in almost all sizes & customized as per request.
We Manufacture & Supply superior qualityCountersunkWashersin Stainless Steel, Galvanized Steel, Alloy Steel, Carbon Steel, Titanium Alloys, Nickel Alloys like Inconel, Monel, Hastelloy, Alloy 20, Copper, Brass, Aluminum, Cupro Nickel Alloys, Duplex & Super Duplex Steel etc with standard sizes like M6, M8, M10 & so on. We also offer customized sizes in these washers with desired surface coating & finish.
Ogee washerare Pressed Bell Shaped Washers with a large bearing surface used to protect bolt heads and nuts from pulling into the bolting surface. TorqBolt manufactures Ogee Washers in material like stainless Steel, Galvanized Steel, Carbon Steel, Alloy Steel, Nickel Alloys, Decorative Copper, Brass & Aluminum Alloys with superior finishing
.
Ogee Washers are available within size range of 1/2" to 1 1/2". We offer complete range of material in Ogee washers as listed below. View Ogee Washer's
We Manufacturer premium quality standard & customized Titanium washers . We Produce All types of washer in different Titanium Alloy Grades like Titanium grade 1, Titanium Grade 2, Titanium Grade 3, Titanium Grade 5, Titanium Grade 7, Titanium Grade 11 etc. We are engaged in Stocking, Supply & Export of Titanium Alloy Fastener products.
We Manufacturer premium quality standard & customized washers from various metals & metal alloys as per ASTM/ASME/DIN/DIN Standards & Specifications.We offer Tooth lock Washers in Stainless Steel & other Exotic material.We also provide passivation, quality coating further processing as per client's requirement.
Finger Spring Washers are sub type of Spring washers specifically designed to reduce vibration and noise while preventing excess wear and tear, especially at high speeds .These finger Spring washers are manufactured by Alloy Fasteners in High carbon finely tempered spring steel. Material like Stainless Steel, Carbon Steel, Low Carbon Alloy Steel, Copper etc are also manufactured upon request.
| DIMENSIONAL CHART | |||||
| De (mm) Outside Dia |
Di (mm) Inside Dia |
Lo (mm) Free Height |
L1 (mm) Loaded Height |
P1 Newton |
Outside Dia. of Bearings (mm) |
|---|---|---|---|---|---|
| *15.11 | 7.92 | 2.38 | 1.57 | 1.34 to 4.45 | 16 |
| 18.49 | 8.74 | 3.18 | 17.80 to 35.60 | 19 | |
| 21.49 | 11.51 | 13.35 to 31.15 | 22 | ||
| 21.49 | 11.51 | 40.05 to 57.85 | 22 | ||
| 23.52 | 11.51 | 26.70 to 44.50 | 24 | ||
| 23.52 | 8.74 | 97.90 to 125.00 | 24 | ||
| 25.50 | 13.11 | 22.25 to 40.05 | 26 | ||
| 25.50 | 13.11 | 35.60 to 53.40 | 26 | ||
| 29.57 | 17.48 | 40.05 to 57.85 | 30 | ||
| 29.57 | 10.31 | 66.75 to 93.45 | 30 | ||
| 29.57 | 17.48 | 267.00 to 334.00 | 30 | ||
| 31.50 | 17.48 | 44.50 to 62.30 | 32 | ||
| 31.50 | 14.30 | 66.75 to 93.45 | 32 | ||
| 31.50 | 17.48 | 66.75 to 93.45 | 32 | ||
| 34.54 | 20.68 | 48.95 to 66.75 | 35 | ||
| 34.54 | 20.68 | 75.65 to 111.00 | 35 | ||
| 39.50 | 24.66 | 66.75 to 93.45 | 40 | ||
| 39.50 | 25.40 | 138.00 to 174.00 | 40 | ||
| 46.48 | 30.20 | 75.65 to 102.00 | 47 | ||
| 51.36 | 34.52 | 75.65 to 102.00 | 52 | ||
Curved Spring Washers are manufactured at Alloy Fasteners as per DIN 128 A & DIN 137 A in materials like Stainless Steel, Alloy Steel, High tensile Alloy Steel, Copper, Brass, Aluminu, Titanium & other Nickel Alloys etc.We can provide these Curved Spring Washers with desired surface finishing.
Wave Spring Washers are sub-type washers of Spring Washers as per DIN 137 B & DIN 128 B. We at Alloy Fasteners manufactures wave spring washers in stainless steel, copper, alloy steel, high tensile alloy steel grades. We produce these three wave spring washers & compression type wave spring washers.
