Dera Bassi, Punjab, India
GST : 03AABCT9458R1ZL
Verified
Add Review
Our Products
Square Drive Adaptors are used as a convertor to permit use of sockets and driving tools to different drive sizes. These are available in various combinations, ¼" Fx3/8"M, 3/8"Fx1/2"M, ½"Fx3/4"M, 1"Fx3/4"M, 1"Fx1 ½"M and vice versa. These are available for manual as well as impact use. For impact use, provision for locking ring and pin is there.
Technical Specifications
| Part No. | Sq. Dr. Female | Sq. Dr. Male | Drive End Dia | Approx OAL |
|---|---|---|---|---|
| ISAO-1 | 1/4" | 3/8" | 14 | 27 |
| ISAO-0 | 3/8" | 1/4" | 20 | 32 |
| ISAO-2 | 3/8" | 1/2" | 22 | 38 |
| ISAO-1 | 1/2" | 3/8" | 26 | 38 |
| ISAO-2 | 3/4" | 1/2" | 48 | 55 |
| ISAO-3 | 1/2" | 3/4" | 28 | 47 |
| ISAO-4 | 3/4" | 1" | 48 | 65 |
| ISAO-3 | 1" | 3/4" | 54 | 70 |
| ISAO-5 | 1" | 1 1/2" | 58 | 90 |
| ISAO-4 | 1 1/2" | 1" | 86 | 110 |
| ISAO-6 | 1 1/2" | 2 1/2" | 86 | 135 |
| ISAO-5 | 2 1/2" | 1 1/2" | 127 | 165 |
Hex Adaptors are used for tightening of sockets cap screws and bolts. These are available in " to 1" square drives to cover across flat sizes from 3mm to 36mm and 1/8" to 1 1/8" in standard and extra lengths for manual as well as impact use.
Square Drive Adaptors are used as a convertor to permit use of sockets and driving tools to different drive sizes. These are available in various combinations, " Fx3/8"M, 3/8"Fx1/2"M, "Fx3/4"M, 1"Fx3/4"M, 1"Fx1 "M and vice versa. These are available for manual as well as impact use. For impact use, provision for locking ring and pin is there.
| Part No. | Sq. Dr. Female | Sq. Dr. Male | Drive End Dia | Approx OAL |
| ISAO-1 | 1/4" | 3/8" | 14.0 | 27 |
| ISAO-0 | 3/8" | 1/4" | 20.0 | 32 |
| ISAO-2 | 3/8" | 1/2" | 22.0 | 38 |
| ISAO-1 | 1/2" | 3/8" | 26.0 | 38 |
| ISAO-2 | 3/4" | 1/2" | 48.0 | 55 |
| ISAO-3 | 1/2" | 3/4" | 28.0 | 47 |
| ISAO-4 | 3/4" | 1" | 48.0 | 65 |
| ISAO-3 | 1" | 3/4" | 54.0 | 70 |
| ISAO-5 | 1" | 1 1/2" | 58.0 | 90 |
| ISAO-4 | 1 1/2" | 1" | 86.0 | 110 |
| ISAO-6 | 1 1/2" | 2 1/2" | 86.0 | 135 |
| ISAO-5 | 2 1/2" | 1 1/2" | 127.0 | 165 |
Hex Adaptors are used for tightening of sockets cap screws and bolts. These are available in ¼" to 1" square drives to cover across flat sizes from 3mm to 36mm and 1/8" to 1 1/8" in standard and extra lengths for manual as well as impact use.
