Delhi, India
Our Products
| Height up to 70M, Max. Weight 400Kg. for Maintenance and Material Loading in High Rise Buildings. |
| Scissor Lifting Platforms perform various lifting activities in factories and industries. Our Scissor Lifting Platforms are enabled to carry variable loads due to their multi-faceted and high grade features. Furthermore our entire assortment is reckoned for their quality and performance. | |
| Cited below are some of the special attributes of our Scissor Lifting Platform: | |
| Mobility | |
| Load bearing capacity | |
| Optimal performance | |
| Fully equipped with all safety devices Platform capacity up to 700Kg. Working Height 6.65m 19.28m. | |
| Salient Features: | |
| Platform extension facility | |
| Option of Indoor and outdoor | |
| Working: | |
| Option of 4 Wheel drive | |
| Controls at ground and top | |
| Lifting capacity: 2 .5T 7T Lifting Height: 5.7M 22M | |
| Salient Features: | |
| Option of Multiple attachments like Basket, Extension with Winch, Fork, Polyp Grab. | |
| High Reaches | |
| High Grade ability | |
| Lifting capacity: 2 tm - 120 tm | |
| Salient Features: | |
| High Lifting Capacity | |
| winch facility with select models | |
| Controls at ground and top | |
| Basket facility with select models | |
| Wireless Remote Control with select models. | |
| |||
| Applications | |||
| Low capital & Operation and Maintenance cost as compared to The De-Dusting Bag House System | |||
| | Since particulate knockdown is achieved in situ, there is no need for long duct runs to convey the dust to a central collection point | ||
| There is no secondary dust disposal problem | |||
| Easy installation in the existing plants | |||
| In most cases, the system can be installed in operating plants. | |||
| | The DRY FOG system takes less space and canbe installed in the plants where there is no space for installation of Bag House de-dusting system. | ||
| No major plant modifications are required for installation of the system. | |||
| Water addition to this process is as low as 0.1% of the weight of the material being handled. | |||
| Aluminum Industry Pot room area, anode paste plants, Bauxite handling systems etc. | |||
| No requirement of Chemicals | |||
| The Metal Transport Vehicle is a Diesel Engine operated vehicle, with a hydrostatic drive and a lifting platform, which is used for lifting Hot Metal Filled ladle. This takes place with the help of a support stand from the floor and transporting to the Cast House. |
| tps manufacturesbulk carriers truck mounted and trailer mounted with capacities ranging from 10 cu.m to 40 cu.m. They are suited for transporting powder free flowing material like cement, fly ash, crush bath, alumina, lime etc. These vehicles have specialized fluidizing arrangements and are able to pneumatically pump the material to receive silo. The bulkers can be supplied in different types of construction steel like ms and ss as per the customers requirements |
| The tank Alumina / Crushed Bath Tankers consist of a prime mover and a semi-trailer per unit with an in built pneumatic discharge system, using the external source of compressed air. It is used for the transportation of Alumina from the main alumina silo to the day silo located in the GTC area as well as transportation of the Crushed Bath from the Crushed Bath Silo in Bath Recycle Shop to the Crushed Bath Silo in GTC area in the smelter plant. These Bulk Carriers are also used for Transporting Cement, Fly Ash and otherfree flowing powered materials in other Industries. |
|
| tps runway sweeping machine works on the principle of vacuum suction. The dirt container provided is with cyclonic separator and mesh filters, which separates the heavy particles from the air stream, due to the centrifugal action and then drops it into the container. |
| our wide range of products also includesthe furnace charging car. These cars are developed as per the requirement of the metallurgical plants. We design and develop our machines keeping in mind the recommended standards. Thisequipment serves various industrial purposes as it has multi- faceted features. |
| Maximum Capacity: 200Kg. Height up to 32-50M Lift Type: Hydraulic operated Winch & Wire Option of wireless remote control |
| The machine is a Rail-cum-Road Vehicle Mounted Vacuum Suction Unit self-contained in all aspects and is suitable for suctioning free flowing powdered and granular materials either directly into the machine container through a hand held Suction Hose connected to the machine or through the Centralized Pipeline Systems. The above machine is one of the most powerful machine of its kind available in the International Market, incorporating state of Art Filter systems, positive displacement Vacuum Pump and control Systems. |
