Our Products
Top factors which make us the best Flushing oil manufacturer in India
We have been working in the industry of flushing oil for many years which has made us earn a good reputation in the market. Some of the major factors why we are the most chosen Flushing oil manufacturer in India are as listed below:
These are premium quality Lithium based Max MP 3 grease manufactured from solvent refined high quality based oils and soap. This grease has excellent structural stability, water resistance, high drop point and very good rust and oxidation inhibition characteristics.
Application: Lubrication of heavy duty roller bearings operating at heavy loads, high speed, high temperature and shock loading conditions. Recommended form industrial and automotive lubrication.
Technical Specifications
Characteristics | TL Max MP 3 Grease | TL Max MP 2 Grease |
---|---|---|
Structure | Smooth | Smooth |
Type of Soap | Lithium | Lithium |
NLGI Grade | 3 | 2 |
Consistency of worked grease at 25℃ | ||
60 Strokes | 220-250 | 265-295 |
100000 Strokes | Does not differ by more than 30 unit from 60 strokes | |
Difference between unworked and Worked penetration at 25℃ | <10 units | <10 units |
Drop Point, ℃ | >180 | >180 |
Free Organic Acidity (as Oleic Acid), % by mass max. |
0.1 | 0.1 |
Free Alkanity (as LiOH), % by mass, max | 0.1 | 0.1 |
Copper strip corrosion @40℃ for 24 hours | Negative | Negative |
Kinematic Viscosity of mineral oil Extracted, from the grease in cSt 40℃ | 100 | 100 |
Viscosity Index of Base Oil | 90 | 90 |
Operating temperature range, deg C | -10 to 130 | -10 to 130 |
TL SCOOTO 4T is advanced low friction 4-Stroke engine oil designed specifically for gearless scooters. Scooters are typically ridden in dense city traffic with frequent stop/start; due to closed bodywork and continuously variable transmission, their engines can run very hot.
TL SCOOTO 4Tcontinuous protects engine from wear and high temperature deposit.
Application: TL SCOOTO 4T is is suitable for 4-stroke scooters of all manufacturers where SL (or below) and JASO MB specifications are recommended, strictly not to be used in wet clutch motorcycle engines.
Note:The Above mentioned data are typical and it may vary with batch to batch within permissible specification limits.
Technical Specifications
Grade | TL SYNTH 4T 10W-30 |
---|---|
KV.cst @100⁰c | 10.5 |
Density | 0.87 |
VI | 135 |
Flash Point ,⁰c | 210 |
Pour Point ,⁰c | -30 |
TBN | 7 |
TL SYNTH 4T is advanced, premium quality engine oil designed for latest generation 4-stroke motorcycle engines. TL SYNTH 4T is designed to optimise performance and protection for motorcycle engines. It is suitable fuel economy oil for latest bikes with Japanese technology.
Application : TL SYNTH 4T is recommended for recommended for high performance 4T motor cycles like Honda, Bajaj / Kawasaki, TVS, Yamaha & Suzuki.
Note : The Above mentioned data are typical and it may vary with batch to batch within permissible specification limits.
TL HD Diesel engine oils are multipurpose engine oil for use in a variety of naturally aspirated engines. It offers reliable protection for engines operating under various environments.
TL HD Diesel engine oils are recommended in older heavy duty commercial vehicles, light commercial vehicles, off highway equipments and D.G. sets where API CF performance level engine oil is specified.
Note: The Above mentioned data are typical and it may vary with batch to batch within permissible specification limits.
Technical Specifications
Grade | TL HD Diesel oil 20W-40 |
TL HD Diesel oil 20W-50 |
---|---|---|
KV.cst @40⁰c | 130 | 140 |
KV.cst @100⁰c | 14 to 16 | 17 to 19 |
VI | 110 | 110 |
Flash Point ,⁰c | 210 | 210 |
Pour Point ,⁰c | -21 | -21 |
Density | 0.87 to 0.89 | 0.87 to 0.89 |
TBN | 6 to 7 | 6 to 7 |
TL ATF is a red dyed transmission fluid, having a low co-efficient of friction to meet General Motors Type A Suffix A specification.
Application : Recommended for automatic and power steering units of automobiles and light trucks requiring Type A Suffix A fluid and also for synchromesh gears. TL ATF is compatible with various types of seal materials.
Note : The Above mentioned data are typical and it may vary with batch to batch within permissible specification limits.
Technical Specifications
Grade | TL ATF |
---|---|
Density | 0.86 to 0.87 |
KV.cst @40⁰c | 6.5 to 7.5 |
VI | 160 |
Flash Point ,⁰c | 220 |
Pour Point ,⁰c | -36 |
TL Axle oils are high quality hypoid gear oils of heavy-duty type, specially formulated to meet API service classification GL-5, IS: 1118-1992 ED type – GL-5, US Military MIL-L-2105D and UK Defence CS 3000B specifications. These oils are recommended for hypoid gear differentials, mechanical transmissions and drive axles operating under severe duty, where bulk oil temperature can reach up to 150°C.
Application: These oil are Recommended for passenger cars, bus and highly truck hypoid, spiral bevel and worm axles and also manual transmission for which an API GL-5 extreme pressure gear lubricants is required.
Note:The Above mentioned data are typical and it may vary with batch to batch within permissible specification limits.
Technical Specifications
Grade | TL Axel oil EP- 90 | TL Axel oil EP- 140 | TL Axel oil 85W-140 |
---|---|---|---|
KV.cst @100⁰c | 16 to 18 | 27 to 29 | 26 to 28 |
VI | 95 | 95 | 98 |
Flash Point ,⁰c |
220 | 230 | 230 |
Pour Point ,⁰c |
-9 | -6 | -15 |
These oils are outstanding performance for turbine this made form best quality of paraffin oils and additives, It has high quality outstanding stability, these oils provide excellent lubrication and protection against rust & corrosion and farming, these oil also provide excellent demulsibility and resistance to forming , These oils are specially formulated to satisfy the demanding requirements of modern high output steam turbines, also fulfil the requirement of geared turbines which required EP properties .
Application: These oils are recommended for all types of turbine and Specially it is recommended for geared turbine which require extreme pressure.
Note: The above mentioned data are typical and it may vary with batch to batch within Permissible specification limits.
Technical Specifications
Characteristics | TL TURBINE 32 | TL TURBINE 46 | TL TURBINE 57 | TL TURBINE 68 |
---|---|---|---|---|
Colour | 0.5 to 1 | 0.5 to 1 | 0.5 to 1 | 0.5 to 1 |
Density @29.5, | 0.84 to 0.87 | 0.84 to 0.87 | 0.84 to 0.88 | 0.84 to 0.88 |
K.V. cSt @ 40 | 30 to 34 | 44 to 48 | 54 to 60 | 66 to 70 |
VI | 110 | 110 | 110 | 105 |
Flash Point, | 220 | 230 | 240 | 245 |
Pour Point, | -9 | -9 | -9 | -9 |
Copper Corrosion Test | No Corrosion | No Corrosion | No Corrosion | 1a |
Demulsibility Test | Pass | Pass | Pass | Pass |
These oils are superior quality diesel engine oil blended from base oil, viscosity index and additives to protect vehicles, these oils provide excellent oxidation and wear protection, this type of oil give protection against rust and corrosion
Application: it is use as per Recommendation in diesel engine vehicles and passenger cars.
Note: The Above mentioned data are typical and it may vary with batch to batch within permissible specification limits.
Technical Specifications
Grade | TL Turbo HD Diesel oil 15W-40 |
TL Turbo HD Diesel oil 20W-40 |
TL Turbo HD Diesel oil 20W-50 |
---|---|---|---|
KV.cst @40⁰c | 116 | 120 | 140 |
KV.cst @100⁰c | 14 to 15.5 | 14 to 16 | 17 to 19 |
VI | 135 | 110 | 110 |
Flash Point ,⁰c | 210 | 210 | 210 |
Pour Point ,⁰c | -21 | -21 | -21 |
Density | 0.87 to 0.89 | 0.87 to 0.89 | 0.87 to 0.89 |
TBN | 9 to 11 | 9 to 10 | 9 to 10 |
Features :
TL SUPER 4T is superior performance engine oil developed with synthetic chemistry of base oil with additives for bikes and scooters for better engine cleanliness, wear protection and long life. It meets API SM JASO MA 2.
Application :- TL SUPER 4T is recommended for high performance 4T motor cycles and scooters, It is recommended for use in 4 Stroke petrol Engines of all global leading manufacturers.
Note:The Above mentioned data are typical and it may vary with batch to batch within permissible specification limits.
Technical Specifications
Grade | TL SUPER 4T 10W-30 | TL SUPER 4T 20W-40 |
---|---|---|
KV.cst @100⁰c | 11 | 14.5 |
Density | 0.88 | 0.88 |
VI | 150 | 120 |
Flash Point ,⁰c | 210 | 210 |
Pour Point ,⁰c | -27 | -27 |
TBN | 7.5 | 7 |
These oils are superior quality diesel engine oil blended from high quality base oil , superior quality of high viscosity index and particular additives to protect heavy load vehicles, these oils provide excellent oxidation and wear protection, sludge and varnish control in engine , these type of oil give protection against rust and corrosion since they are multi grade oils they are suitable for all the season .
Application : it is Recommended for new generation tractors.
Note :The Above mentioned data are typical and it may vary with batch to batch within permissible specification limits.
Technical Specifications
Grade | TL Power HD Diesel Engine oil API 15W-40 CH-4 |
---|---|
KV.cst @40⁰c | 120 |
KV.cst @100⁰c | 14 to 15.5 |
VI | 140 |
Flash Point ,⁰c | 210 |
Pour Point ,⁰c | -21 |
Density | 0.87 to 0.89 |
TBN | 9 to 11 |
Technical Specifications
Characterstics | Structure | Type of soap | NLGI Grade | Consistency of worked grease at 25"C 60 Strokes | Drop Point, "C | Difference between unworked and worked penetration at 25°C | Free Alkalinity (as NaOH), 0/0 by mass, max | Copper strip corrosion 03)40°C for 24 hours | Timken OK Load, Kg | Four ball wear test, Wear Scar Diameter in mm |
---|---|---|---|---|---|---|---|---|---|---|
EP 3 Grease | Smooth | Lithium | 3 | 220 - 250 | > 180 | <10 units | 0.1 | Negative | 22 | 0.5 |
EP 2 Grease | Smooth | Lithium | 2 | 265 - 295 | > 180 | <10 units | 0.1 | Negative | 22 | 0.5 |
EP 1 Grease | Smooth | Lithium | 1 | 310-340 | >180 | - | 0.1 | Negative | 22 | 0.5 |
EP 0 Grease | Smooth | Lithium | 0 | 355-385 | 160 | - | 0.1 | Negative | 22 | 0.5 |
EP 00 Grease | Smooth | Lithium | 0 | 400-430 | 140 | - | 0.1 | Negative | 22 | 0.5 |
Technical Specifications
Grade Color |
ASTM @ 29°C |
Density @ 40°C |
K.V. cSt | VI Point, °C |
Flash Point, °C |
Pour |
---|---|---|---|---|---|---|
TL HTF 32 | 3 to 4 | 0.88 | 32 | 95 | 196 | -9 |
TL HTF 100 | 3 to 4.5 | 0.89 | 100 | 94 | 230 | -6 |
Topmost factors that make us efficient APLR Grease Manufacturer in India
We are the trustworthy APLR Grease Manufacturer being in the industry for many years. Our company is recognized as the best in the market due to our excellent services. Below are a few major reasons that make people choose us as their APLR Grease Manufacturer in India:
These oils are premium grade heavy duty antiwear type high quality solvent refined mineral hydraulic oils. These oil give excellent protection against rust , oxidation & forming .
Application: These oils are recommended for high pressure hydraulic systems, power transmission in systems operating at high speeds, loads and temperatures.
Note: The above mentioned data are typical and it may vary with batch to batch within Permissible specification limits.
Technical Specifications
Characteristics | ISO VG 15 | ISO VG 22 | ISO VG 32 | ISO VG 46 | ISO VG 68 | ISO VG 100 | ISO VG 150 |
---|---|---|---|---|---|---|---|
ASTM Colour | 1 | 1 | 1.5 | 1.5 | 1.5 | 2 | 2.5 |
Density @ 29.5 ℃ | 0.84 to 0.89 | ||||||
K.V. cSt @ 40 ℃ | 15.1 | 22.4 | 32.7 | 46.8 | 68.1 | 100.2 | 152 |
VI | 100 | 100 | 100 | 99 | 95 | 98 | 96 |
Flash Point, ℃ | 160 | 170 | 188 | 190 | 220 | 240 | 250 |
Pour Point, ℃ | -9 | -9 | -9 | -9 | -9 | -6 | -6 |
Copper corrosion test | 1a | 1a | 1a | 1a | 1a | 1a | 1a |
Demulsibility Test | Pass | Pass | Pass | Pass | Pass | Pass | Pass |
Why choose us as EP2 Grease Manufacturer in India?
The high-quality EP2 grease will provide the automobile against all types of corrosion and rust. We are the reliable EP2 Grease Manufacturer and have been recognized as the trusted brand for grease manufacturing. Some of the factors which make us the topmost EP2 Grease Manufacturer in India are as follows:
These are premium quality Calcium based special grease manufactured from solvent refined high quality base oils and soap. This grease has excellent water resistance and adhesive characteristics.
Application: Lubrication of Chassis of all types of automotive vehicles including commercial vehicles, tractors and other heavy equipment, Recommended for ball and roller bearings of wheel electrical equipment and water pumps operating at moderate temperature.
Note: The above mentioned data are typical and it may vary with batch to batch within Permissible specification limits.
Technical Specifications
Grade | Density at 29.5°C |
K.V. cSt @ 40"C |
VI | Flash Point, °C |
Pour Point, °C |
Copper Corrosion Test |
---|---|---|---|---|---|---|
TL Gear Oil 46 | 0.87 | 46.8 | 95 | 190 | -9 | 1 b |
TL Gear Oil 68 | 0.88 | 68.1 | 95 | 220 | -9 | lb |
TL Gear Oil 100 | 0.89 | 100.2 | 94 | 240 | -6 | 1 b |
TL Gear Oil 150 | 0.89 | 150.5 | 94 | 240 | -6 | 1 b |
TL Gear Oil 220 | 0.9 | 221 | 93 | 250 | -6 | 1 b |
TL Gear Oil 320 | 0.9 | 320.9 | 93 | 250 | -6 | 1 b |
TL Gear Oil 460 | 0.9 | 465 | 92 | 274 | -6 | 1 b |
Features :
Temper proof packing
Effectiveness
Safe packaging
Major attributes of the range are:
Technical Specifications
Properties | 5 | 12 | 22 |
---|---|---|---|
Viscosity Cst at 40°C | 5 | 12 | 22 |
Viscosity Index | 90 | 95 | 95 |
Flash Point Coc°C | 110 | 155 | 190 |
Pour Point °C | (-)3 | (-)3 | (-)3 |
Technical Specifications
Products | K. V. cst@100°C | VI | Flash Point °C | Pour Point,°C | Copper Corrosion Test |
---|---|---|---|---|---|
EP-90-GL4 | 16.9 | 95 | 200 | -9 | 2 |
EP-140-GL4 | 28 | 95 | 220 | -6 | 2 |
EP-90-GL5 | 16.9 | 95 | 200 | -9 | 2 |
EP-140-GL5 | 28 | 100 | 220 | -6 | 2 |
Technical Specification
Grade | Density @ 29.5 °C |
K.V. cSt @ 100°C |
VI | Flash Point, °C |
Pour Point, °C |
TBN |
---|---|---|---|---|---|---|
TL TRACTOR OIL 30 | 0.88 | 12 | 95 | 230 | -9 | 5 |
TL TRACTOR OIL 40 | 0.9 | 14.5 | 95 | 240 | -9 | 5 |
TL TRACTOR OIL 20W-40 | 0.9 | 14.5 | 125 | 240 | -27 | 5 |
These oils are high quality solvent refined mineral oils. These oils have high viscosity index, good oxidation and thermal stability. They provide excellent lubrication and protection against rust & corrosion. These oils have excellent compatibility with seals used in hydraulic systems.
Application: These oils are recommended for hydraulic and circulating systems of industrial and automotive equipments. These oils are suitable for hydraulic machine operating under heavy load, these oils are also suitable for pumps.
Note: The above mentioned data are typical and it may vary with batch to batch within Permissible specification limits.
Technical Specifications
Characteristics | TL TURBINE 32 | TL TURBINE 46 | TL TURBINE 57 | TL TURBINE 68 |
---|---|---|---|---|
Colour | 0.5 to 1 | 0.5 to 1 | 0.5 to 1 | 0.5 to 1 |
Density @29.5, | 0.84 to 0.87 | 0.84 to 0.87 | 0.84 to 0.88 | 0.84 to 0.88 |
K.V. cSt @ 40 | 30 to 34 | 44 to 48 | 54 to 60 | 66 to 70 |
VI | 95 | 95 | 95 | 95 |
Flash Point, | 200 | 210 | 210 | 210 |
Pour Point, | -9 | -9 | -9 | -9 |
Copper Corrosion Test | No Corrosion | No Corrosion | No Corrosion | 1a |
Demulsibility Test | Pass | Pass | Pass | Pass |
Technical Specifications
Grade | TL Power HD Diesel Engine oil 15W-40 |
---|---|
KV.cst @40⁰c | 120 |
KV.cst @100⁰c | 14 to 15.5 |
VI | 140 |
Flash Point ,⁰c | 210 |
Pour Point ,⁰c | -21 |
Density | 0.87 to 0.89 |
TBN | 9 to 11 |
TL PREMIUM HD diesel engine oil is developed for LCV / HCVs with or without EGR for BS III / IV vehicles. It meets API CI 4 Plus, ACEA E7, MB 228.3, VDS-3, CES 20076/CES 20077/CES 20078 specs. It has potential for increasing the drain period compares to an API CH-4 OIL.
It is recommended for Light or heavy duty trucks, buses, cars and any vehicle fitted with exhaust gas recirculation technology and generating high soot to meet BS II, III & IV emission norms.
Note: The Above mentioned data are typical and it may vary with batch to batch within permissible specification limits.
Technical Specifications
Grade | TL Premium HD Diesel oil 15W-40 |
---|---|
KV.cst @40⁰c | 120 |
KV.cst @100⁰c | 14 to 15.5 |
VI | 140 |
Flash Point ,⁰c | 210 |
Pour Point ,⁰c | -21 |
Density | 0.87 to 0.89 |
TBN | 9 to 11 |
TL TURBO HD diesel engine oils are is specially designed for heavy duty commercial vehicles with turbo charged engines. It meets API CF4. It provides excellent engine cleanliness and protection against wear and corrosion.
Note: The Above mentioned data are typical and it may vary with batch to batch within permissible specification limits.
Technical Specifications
Grade | TL Turbo HD Diesel oil 15W-40 |
TL Turbo HD Diesel oil 20W-40 |
TL Turbo HD Diesel oil 20W-50 |
---|---|---|---|
KV.cst @40⁰c | 116 | 120 | 140 |
KV.cst @100⁰c | 14 to 15.5 | 14 to 16 | 17 to 19 |
VI | 135 | 110 | 110 |
Flash Point ,⁰c | 210 | 210 | 210 |
Pour Point ,⁰c | -21 | -21 | -21 |
Density | 0.87 to 0.89 | 0.87 to 0.89 | 0.87 to 0.89 |
TBN | 9 to 11 | 9 to 10 | 9 to 10 |
These are premium quality Lithium based HD Long Life Grease manufactured from solvent refined high quality base oils and soap. This grease has excellent structural stability, water resistance, high drop point and very good rust and oxidation inhibition characteristics for longer service life.
Application: Recommended for use in wheel bearing of heavy duty vehicles for longer service life.
Note: The above mentioned data are typical and it may vary with batch to batch within Permissible specification limits.
Technical Specifications
Characteristics | Lithium Long Life Grease | Lithium Long Life Grease |
---|---|---|
Structure | Smooth | Smooth |
Type of soap | Lithium | Lithium |
NLGI Grade | 3 | 2 |
Consistency of worked grease at 25°C | ||
60 Strokes | 220 - 250 | 265 - 295 |
100000 Strokes | Does not differ by more than 30 units from 60 strokes |
|
Difference between un worked and worked penetration at 25°C | <10 units | <10 units |
Drop Point, °C | > 180 | > 180 |
Free Organic Acidity (as oleic acid), 0/0 by mass, max. | 0.1 | 0.1 |
Free Alkalinity (as LiOH), % by mass, max | 0.1 | 0.1 |
Copper strip corrosion @40°C for 24 hours | Negative | Negative |
Kinematic Viscosity of mineral oil extracted, from the grease in cSt 40°C | 100 | 100 |
Viscosity Index of Base Oil | 90 | 90 |
Technical Specifications
Characteristics | Lithium Grease |
Lithium Grease |
---|---|---|
Structure | Smooth | Smooth |
Type of soap | Lithium | Lithium |
NLGI Grade | 3 | 2 |
Consistency of worked grease at 25°C | ||
60 Strokes | 220 - 250 | 265 - 295 |
100000 Strokes | Does not differ by more than 30 units from 60 strokes |
|
Difference between un worked and worked penetration at 25°C | <10 units | <10 units |
Drop Point, °C | > 180 | > 180 |
Free Organic Acidity (as oleic acid), 0/0 by mass, max. | 0.1 | 0.1 |
Free Alkalinity (as LiOH), % by mass, max | 0.1 | 0.1 |
Copper strip corrosion @40°C for 24 hours | Negative | Negative |
Kinematic Viscosity of mineral oil extracted, from the grease in cSt 40°C | 100 | 100 |
Viscosity Index of Base Oil | 90 | 90 |
These are premium quality Calcium based special grease manufactured from solvent refined high quality base oils and soap. This grease has excellent water resistance and adhesive characteristics.
Application: Lubrication of Chassis of all types of automotive vehicles including commercial vehicles, tractors and other heavy equipment, Recommended for ball and roller bearings of wheel electrical equipment and water pumps operating at moderate temperature.
Note : The above mentioned data are typical and it may vary with batch to batch within Permissible specification limits.
Technical Specifications
Characteristics | Calcium Grease |
---|---|
Structure | Smooth |
Type of soap | Calcium |
NLGI Grade | 3 |
Color | Light |
Consistency of worked grease at 25°C 60 Strokes | 220 - 250 |
Difference between un worked and worked penetration at 25°C | <10 units |
Drop Point, °C | > 90 |
Free Organic Acidity (as oleic acid), 0/0 by mass, max. | 0.1 |
Free Alkalinity (as LiOH), % by mass, max | 0.1 |
Copper strip corrosion @40°C for 24 hours | Negative |
Sulphated ash, %by mass, Max. | 3 |
These are special sodium based grease manufactured from solvent refined high quality base oils and soap. This grease has high drop point.
Application: Recommended for Lubrication of Wheel bearings, universal joints and ball & roller bearings of electrical equipment of automotive vehicles.
Note: The Above mentioned data are typical and it may vary with batch to batch within permissible specification limits.
Technical Specifications
Grade | TL Turbo HD Diesel oil 15W-40 |
TL Turbo HD Diesel oil 20W-40 |
TL Turbo HD Diesel oil 20W-50 |
---|---|---|---|
KV.cst @40⁰c | 116 | 120 | 140 |
KV.cst @100⁰c | 14 to 15.5 | 14 to 16 | 17 to 19 |
VI | 135 | 110 | 110 |
Flash Point ,⁰c | 210 | 210 | 210 |
Pour Point ,⁰c | -21 | -21 | -21 |
Density | 0.87 to 0.89 | 0.87 to 0.89 | 0.87 to 0.89 |
TBN | 9 to 11 | 9 to 10 | 9 to 10 |
Technical Specifications
Grade | Density @29.5°C (kg/I) |
K.V. cSt @ 40°C | VI | Flash Point, °C | Pour Point, °C |
---|---|---|---|---|---|
TL Machine 011 15 | 0.85 | 15.1 | 100 | 170 | -9 |
TL Machine Oil 22 | 0.86 | 22.4 | 100 | 180 | -9 |
TL Machine Oil 32 | 0.87 | 32.7 | 100 | 188 | -9 |
TL Machine Oil 46 | 0.87 | 46.8 | 95 | 190 | -9 |
TL Machine Oil 68 | 0.88 | 68.1 | 95 | 220 | -9 |
TL Machine 011100 | 0.89 | 100.2 | 94 | 240 | -6 |
TL Machine 011 150 | 0.89 | 150.5 | 94 | 240 | -6 |
TL Machine Oil 220 | 0.9 | 221 | 93 | 250 | -6 |
TL Machine Oil 320 | 0.9 | 320.9 | 93 | 250 | -6 |
TL Machine Oil 460 | 0.9 | 465 | 92 | 250 | -6 |
10W is a high performance hydraulic oil formulated from advanced base oils and a balanced additive system designed to satisfy a wide range of heavy-duty hydraulic equipment requirements. This product is specifically engineered using an effective balance of ashless dispersants and metallic detergents combined with inhibitors to control oxidation, wear, corrosion and rust. Mobil Hydraulic 10W is used in a wide range of on and off-highway hydraulic applications.
Applications
Note: The above mentioned data are typical and it may vary with batch to batch within Permissible specification limits.
TL Super Duty TO-4 is a red dyed transmission fluid, having a low co-efficient of friction to meet General Motors Type A Suffix A specification.
Application: Recommended for automatic and power steering units of automobiles and light trucks requiring Type A Suffix A fluid and also for synchromesh gears. TL Super Duty TO-4 is compatible with various types of seal materials.
Note: The Above mentioned data are typical and it may vary with batch to batch within permissible specification limits.
TL POWER HD Diesel engine oil is high performance diesel engine oil developed for a drain interval of up to 36, 000 km in heavy duty commercial vehicles meeting BS IV (vehicles without Diesel Particulate Filter), BS III and BS II emission norms.
Application: It is recommended for new generation diesel engine vehicles, this oil can also be used in vehicle requiring API CG-4 or API CF-4.
Note: The Above mentioned data are typical and it may vary with batch to batch within permissible specification limits.
Technical Specifications
Grade | TL Power HD Diesel Engine oil 15W-40 |
---|---|
KV.cst @40⁰c | 120 |
KV.cst @100⁰c | 14 to 15.5 |
VI | 140 |
Flash Point ,⁰c | 210 |
Pour Point ,⁰c | -21 |
Density | 0.87 to 0.89 |
TBN | 9 to 11 |