Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

TS

Trinity Sales & Services
location Khadgaon, Nagpur, Maharashtra

Write a Review
Call Now Call Now

Our Products

  1. Automobile Garage Equipment 5 Products available
  2. Automobile Repair Tools & Equipment 3 Products available
  3. Elevators 3 Products available
  4. Scanners 2 Products available
  5. Spray Painting Equipment 1 Products available
  6. Dryers 1 Products available
  7. Welding Machinery 1 Products available
  8. Air Compressor 1 Products available
  9. Generators 1 Products available
  10. Industrial Jacks, Lifts & Winches 1 Products available
  11. Straightening Machines 1 Products available
  12. Trolleys 1 Products available
  13. Cutting Tools 1 Products available
  14. Escalators & Elevators 1 Products available
  15. Load Lifter 1 Products available
  16. Testing Equipment 1 Products available
  17. Fuel Injection System & Assemblies 1 Products available
  18. Cleaning Machines & Equipments 1 Products available
  19. Measuring Instruments & Equipment 1 Products available
  20. Washers 1 Products available
  21. Vacuum Cleaner 1 Products available
  22. Pollution Control Machines & Devices 1 Products available
  23. Industrial Machinery 1 Products available
  24. Others Products 6 Products available

Automobile Repair Tools & Equipment

Leading Manufacturer, Supplier & Retailer of Wheel Alignment Machines, Tyre Changers and Leaser Wheel Alignment System.

Wheel Alignment Machines

Wheel Alignment Machines
  • Power Supply 220V, 1 Phase
  • Display 15½ colour screen with high resolution graphics
  • Display resolution unlimited reference value input in degrees/minutes, degree/fractions, mm/decimals, mm/fractions, inches/decimals, inches/fraction
  • Wheel size range 10½ - 20½
  • Measuring range with accuracy +- 10 with +- 10'
  • Total toe +- 5 with +- 5'
  • Individual toe +- 8 with +- 8'
  • Camber +- 5 with +- 5'
  • Driving Axis Angle +- 18 with +- 10'
  • Castor +- 18 with +- 10'
  • Kingpin Inclination +- 5 with +- 5'
  • Wheel setback +- 5 with +- 5'
  • Toe out on turns at 20 steering lock +- 5 with +- 5'
  • Full Wheel lock +- 60 with +- 10'
  • Castor angle adjustment range +- 10
  • Load capacity of turntables 600 Kgs.
  • Load capacity of sliding support 600 Kgs.

Features

  • The equipment comes equipped with a computer, 15 VGA monitor, key-board, 3.5 floppy disk drive, 2 or 4 sensor (measuring heads), a large storage cabinet, 80 column printer, infrared cordless remote control, turntables, sensor holders & other related parts.
  • Suitable for all cars and LCV's (additional accessories required for HCV alignment.)
  • Over 3000 target value memory locations with menu.
  • Theoretical reference data capacity for up to 10, 000 vehicles in the memory.
  • An archive for calling up earlier measured data in the event of customer complaints.
  • Permanent system monitoring even during the measuring process.
  • Automatic fault display and on-line help button for all measuring and system functions.
  • All front and rear-wheel value for the measured-value printout are calculated in a single wheel alignment run.
  • Cordless remote control provided to enable the operator to operator the m/c from the steering wheel.
  • Live castor adjustment and simultaneous display of castor, camber and toe readings on one single screen.
  • 24 value measured from the steering wheel-rapidly and precisely with PC technology.
  • Automatic wheel run out display prevents incorrect measurements. Four point run out compensation for higher accuracy.
View Complete Details
Ask Latest Price & Details
Tyre Changers

Tyre Changers
  • Bead Breaker Opening 13” (325mm)
  • Self Centering Chuck  
  • External Rim Clamping 10” min. 18” max
  • Internal Rim Clamping 10” min. 20” max
  • Wheel Rim Width 10”
  • Max. Chuck rotating to torque 100-110 Kg.
  • Drive Motor 0.75 Kw / 1 HP 3 Ph 412 V or
  •   0.75 Kw / 1 HP 1 Ph 230 V
  • Max. Wheel dia. 40” (1010mm)
  • Bead Breaking Pressure 16.5 Kn at 12 Bar
  • Compressed Air required 6 to 12 Bars.
  • Floor space (L X W X H) 960 X 730 X 1560 (in mm)
  • Net Weight of machine 200 Kgs.Approx.
  • Gross Weight of machine 230 Kgs.Approx.

Trinity Brand automatic tpre changer model atc 100 is an electro pneumatic machine with toughest and robust body. This tyre changer ensures easy fitting and removal of tyre within very short time without any trouble

View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.