Trishla Electrical Solutions Surat, Gujarat

Automation Gates :-- Electric gates are an easy way to ensure the security of private premises and can be used for all sized properties. Electric gates, though not very commonplace at the moment, have found their niche in the market today. For those who find the security of their premises (be it residential or commercial) important, electric gates are the way to go. There is a decrease in the cost of electric gate kits and their installation. Aside from the basic kits, there are now many features that can be added to ensure security as well as make them more convenient.  Automated gates  are classed as machines and care should be taken to ensure they have the correct safety features / and are regularly maintained.   More about swing gates:-- Swing gates open with a rotation around a fulcrum, just like an ordinary door. When the gate's doors open, they usually turn inward thus requiring specific internal space. Knowing the dimensions and the approximate weight of the leaf gate, the sturdiness of the post and the leaf gate, the material it is made of, is necessary in order to choose the ideal automation system. The automations are usually powered by the 230V supply and 24Vdc, which, thanks to the low voltage alimentation, guarantees a safer functioning. Moreover, the 24Vdc power supply is recommended when an intensive use is necessary, which is usually requested for commercial and industrial application.Are the leaf gate resistant, with a metallic or hard structure? The recommended installation for a single or double leaf gate, if the space required for the opening of the leaf gate is reduced by the presence of walls or fences, is an endless screw motor, surface mounted. It's also possible to choose among a wide range of motorizations, depending on the weight and the dimensions of the leaf gate, in order to have a system which is tailor-made, even if the leaf gate are big.  Are the leaf gate light? Are they wooden, PVC or aluminium made of? Are they set on jutting pillars? The ideal automation is a compact, sturdy, articulated arm: it allows the leaf gate to move smoothly and effortlessly. The articulated arm allows maximum ease of installation if there are walls or obstacles near the gate's post, or if the pillars are too narrow and light for other motorizations.  Are you looking for a minimum aesthetic solution impact? The ideal motorization is the underground installation, totally invisible: elegant and perfect if you are looking for a discreet system in order to increase the aesthetical value of your entrance. The automation system stands out for the reliability of its materials and the special treatments which ensure great resistance to corrosion and a perfect long-lasting functioning, also under extreme climatic conditions. Do you want to automate a pedestrian entrance? The ideal solution for pedestrian gates is an articulated arm motorization. The gearmotor, which is extremely compact, is easily set on narrow pillars, even if their width is only 10cm, or whenever a pillar is set near a wall or fence. Sliding gates usually have a single door, which runs on a track with a ratchet. They require a long and narrow space for the gate to slide along during the opening and closing phases. This type of gate is the ideal protection for wide entrances, entrances placed uphill or wherever the space inside the property is not sufficient to enable the opening of swing gates. Whenever you have to choose the ideal motorization you need to consider the weight and, when necessary, the length of the door. They are equipped with sensitive edges for maximum safety during the closing phase: the anti-crushing/obstacle detection function stops and reverses the movement of the gate in case its movement is blocked, thus avoiding damage to people and objects.  How much does the leaf gate weigh? There are many available motorizations for residential use: light leaf gates up to 300 kg and heavy ones up to 600 and 1000 kg, in order to offer ''taylor made'' systems without any problem. Is it possible to automate heavy gates for wide entrances, which are typical of shopping centers, industries, hospitals.? The motorizations are designed to control the automation of gates with leaves which weigh up to 3500 kg, designed to ensure maximum safety of functioning and reliable long-lasting performances, which can resist under any atmospheric condition.     Automatic Boom Barrier :- There are various technologies for Automatic Boom Barrier and Out of them Electro- Mechanical is one of them, which is a widely accepted technology and a full proof technology also. rest of other technologies are just manufacturer specific only. These electro mechanical device comes with 24VDC Drive unit which can run continuously without generating heat, so electro-mechanical boom barrier can be operated Continuously. These electro mechanical boom barrier can be use in Intensive Duty Cycle. Operation / Integration of Automatic Boom Barrie r:- An Automatic boom barrier can be operated through- 1. Normal Push Button - Beninca Push Button 2. Remote Control - 3. RFID Tags / RFID Reader 4. Loop Detector 5. Any third party access control device.

Solar panel refers either to a photovoltaic module, a solar thermal energy panel, or to a set of solar photovoltaic (PV) modules electrically connected and mounted on a supporting structure. A PV module is a packaged, connected assembly of solar cells. Solar panels can be used as a component of a larger photovoltaic system to generate and supply electricity in commercial and residential applications. Each module is rated by its DC output power under standard test conditions (STC), and typically ranges from 100 to 320 watts. The efficiency of a module determines the area of a module given the same rated output - an 8% efficient 230 watt module will have twice the area of a 16% efficient 230 watt module. There are a few solar panels available that are exceeding 19% efficiency. A single solar module can produce only a limited amount of power; most installations contain multiple modules. A photovoltaic system typically includes a panel or an array of solar modules, an inverter, and sometimes a battery and/or solar tracker and interconnection wiring. Solar modules use light energy (photons) from the sun to generate electricity through the photovoltaic effect. The majority of modules use wafer-based crystalline silicon cells or thin-film cells based on cadmium telluride or silicon. The structural (load carrying) member of a module can either be the top layer or the back layer. Cells must also be protected from mechanical damage and moisture. Most solar modules are rigid, but semi-flexible ones are available, based on thin-film cells.

Main Panel The Main Panel is the brain of the system. It supports all the wired detectors, PIR, magnetic sensors, etc. The users can easily set the system on arming/disarming mode through Pin, Key fob or Telephone. The connected hooter gets the information from the sensors, it then raises an audible alarm locally and the panel simultaneously sends a signal to the i-Alert -Central Monitoring Service that operates 24 x 7, 365 days. LED Keypad LED Keypad functions as the interface to your Wired Alarm System installed security device. All Alarm functions as well as system status, can be observed and controlled through the alarm keypads. It is used for arming disarming the system. LED indicated the function and the status of the zones and the keys indicating fire and panic are also available on the keypad Magnetic Sensor - Magnetic Door Sensor is ideally used to monitor closed entry points such as doors & windows. It is designed to send a signal to the main panel, when the contact between the transmitter and corresponding magnetic sensor is broken. Motion Sensor - Motion sensor is equipped with passive infrared sensors that detect unauthorized movement in the house when the Alarm System is in the armed condition. The state of art motion detectors use the most modern techniques that can distinguish between the movement of a pet and a human, thus eliminating the possibility of a false alarm.

When a visitor presses one of the outdoor panel pushbuttons, the built-in camera is connected and the image captured outdoors appears on the monitor screen. Connection takes place automatically with no need to activate the equipment, which is one of the essential elements of video door entry. As of this point, the person inside the building can open the door if they wish or begin a conversation, which is usually secret (cannot be heard by other users of the same facility). The equipment also disconnects automatically after a set time has elapsed. The video entry system as a whole runs on low voltage energy from the building’s trunk. System  -   Consisting of a calling station and a receiving station and in an option a wire less receiver. Two way communication with access control option. Supplied by AC/DC power. Necessary cabling. Features  - Day/ Night viewing, Talk Back Station , Wireless Receiver. Snapshot of the Caller at the door , Parallel Device. Application  -   Bunglow, Flat , Office etc.

Closed-circuit television (CCTV),  also known as video surveillance, is the use of video cameras to transmit a signal to a specific place, on a limited set of monitors. It differs from broadcast television in that the signal is not openly transmitted, though it may employ point topoint (P2P), point to multipoint, or mesh wireless links. Though almost all video cameras fit this definition, the term is most often appliedto those used for surveillance in areas that may need monitoring such as banks, casinos, airports, military installations, and conveniencestores. Videotelephony is seldom called "CCTV" but the use of video in distance education, where it is an important tool, is often so called. In industrial plants, CCTV equipment may be used to observe parts of a process from a central control room, for example when the envir-onment is not suitable for humans. CCTV systems may operate continuously or only as required to monitor a particular event. A moreadvanced form of CCTV, utilizing digital video recorders[3] (DVRs), provides recording for possibly many years, with a variety of qualityand performance options and extra features (such as motion detection and email alerts). More recently, decentralized IP cameras, someequipped with megapixel sensors, support recording directly to network-attached storage devices, or internal flash for completely stand-alone operation. Surveillance of the public using CCTV is particularly common in many areas around the world.

Biometrics   refers to metrics related to human characteristics and traits. Biometrics authentication (or realistic authentication) is used in computer science as a form of identification and access control. It is also used to identify individuals in groups that are under surveillance. Biometric identifiers are the distinctive, measurable characteristics used to label and describe individuals. Biometric identifiers are often categorized as physiological versus behavioral characteristics. Physiological characteristics are related to the shape of the body. Examples include, but are not limited to fingerprint, palm veins, face recognition, DNA, palm print, hand geometry, iris recognition, retina and odour/scent. Behavioral characteristics are related to the pattern of behavior of a person, including but not limited to typing rhythm, gait, and voice. Some researchers have coined the term behaviometrics to describe the latter class of biometrics. System :   Consisting of a device with Biometric Reader. Supplied with DC/AC power . Necessary Cabling. Features :    PIN, USB link, Backup Battery, TCP/IP , RS 232/485 , Access Control , Camera , WiFi , GPRS Application :   Attendence Management, Access Control, Face ID attendence recorder. Door Lock.