Our Products
All types of Column frames (Rectangular, Square, sized, Circular, Angular, T-Shaped, L-Shaped etc) are made out of MS-Sheet 3.15/ 4.0 mm welded and suitably stiffened with MS-Angles as per design.
Slabform panels are made out of 2 mm thick press bent M.S. sheet and sheet pressed stiffener welded together. Pressed bent panels are light weight and available with 38 mm depth & 70 mm depth.
Caster wheel mounted special wall forms, whch move on channel track so as avoid frequent erection and dismanting of shuttering. Mobile Shuttering comprise of :
Made from MS bright bar of 32 or 36 mm with adjustment upto 225 mm / 350 mm / 450mm or required size and provided with MS nuts made from 56mm bar. Each jack comprises of 6 mm thick & 75 mm wide Stirrup heads (U-Shaped) which is used to hold steel or timber runners.
Made from MS bright bar of 32 or 36 with adjustment upto 225 mm / 350 mm or required size and provided with MS nuts made from 56mm bar. Each jack welded with a base plate of 1S0x150x6-mm size.
Cantilevers made out of 40N.B."M" Tube with forged blaaes welded to two arms and with provision for accepting U-head jacks at the other end.
Adjustable column Clamps are used to hold the column frames position so there is no bulging and de-shaping of columns.
Adjustable beam clamps are designed for clamping beam formwork and casings so as to hold beam sides firmly thus preventing bulging. It allows inter changeability of arms, which ensures maximum versatility.
Wall form panels made out slotted Ms angles / Flats (40x5 or 45x4or 45x5etc.) welded with 2.5mm or 3.15mm sheets & suitably stiffened with ms-angles. It is a self- supporting system for concrete walls Available in pour heights of 1.25m, 2.5m or as per Client's requirement. Conventional wall form systems include Wall form Panels, Panel, Intenal Corner Panel, External Corner Panel, Lap Angles, Soldiers (light duty / heavy duty), Channel/Tubular Walers and standard wall form accessories like single clamp, Double / Bridge clamp, Assembly nut & bolt, Wedge & clip etc. Wall form systems can be either for one-sided shuttering or both sided shuttering with Loop anchors / Tie bars or Wall ties embedded in concrete. For curved walls flexible panels are used. Heavy-duty soldiers are used for single sided shuttering.
Ties of 12, 16 & 20mm dia. and in length to suit wall thickness are threaded at both ends for bolting & anchoring wallforrn plates on ooposne sides.
We are known as one of the trustworthy manufacturers and suppliers of cantilever brackets from Sonipat (Haryana). Tulika Engineers Pvt. Ltd. specializes in manufacturing cantilever brackets of different sizes, specifications, and designs. These brackets are made using the finest grade metal to endure any kind of weather conditions. Our product is dimensionally stable and meant for long-lasting use in construction applications. A number of customers place repeated orders for the brackets, we make available in different quality, finishes, and grades.
Tulika Engineers Pvt. Ltd. is the foremost manufacturer and supplier of the finest PSC girder from Sonipat (Haryana). Our product serves as the hallmark of quality, performance, and longevity, as we manufacture it using the finest material and advanced tools and equipment. We design prestressed concrete girders as per the clients’ drawings and deliver the ready products in batches, as agreed between the clients and us. A team of qualified professionals as well as skilled people help us complete the orders on a timely basis.
We present Panel Decking System which is popularly known as Tulika Decking Systems. Our Panel Decking System is designed to cater various commercial and domestic requirements. Precision of structure and impeccable strength are special attributes of Panel Decking System offered by us.
Specially developed for
In addition to this it is also used for Realign wall form by using steel wailer, head adopter, Food adopter, Supporting brackets, CT. Props, Chanel beam, Splice plate, Wailer connecting pin Tour way head, Drily plate & Safe Guard Hang claw assembly etc. We can also offer these systems in accordance to customized requirements.
Beam supports made out of 40 N.B. 'M 'Tube comprises of two arms at 500mm c/c welded with forged blades. Beam brackets are used to provide support to beam formwork from slab support standards with provision for accepting U-head jacks. Each beam bracket has a safe load carrying capacity of 1500 kg
A P Scaffolding consists of two verticals and one honzontal both of 48.3mm OD tube. On vertocals, Lugs are welded° at 500 mm c/c provide rigid support to horizontal which has built in three way clamps welded at both ends to taking bracing tube connecting Units
Standard Sizes : 2000x1220, 1500x1220, 1000x1220, 1830x1220. 1830x1220. 1830x1220
it consists of a rigid welded frame of two vertical 40NB pipes connected by two 32 NB pipes as horizontals. Two pieces of 50 NB pipes are welded at top of the frame to accommodate the bottom of another similar frame. The frames are Interconnected by Scissors cross braces (20 NB "L") through pins welded on frames and locked in position by spring clips.
Standard H-Frames :2000x1250, 1500x1250. 1 000xsoo or as per client's requirement H-Frame with 50 NB verticals are suitable for staging heavier structures.
Specifications
Type | Size |
---|---|
To suit 38 mm deep panel | 1.2 |
1.8 | |
2.0 | |
To suit 70 mm deep panel | 1.2 |
1.8 | |
2.0 |
Pressed coupler made out of 4mm MS sheets are used for connecting two tubes It may be Right Angle Coupler for connectrrig tubes at right angle to each other.
250-mm long MS spigots made of 3mm thick & 38-mm square pipe is provided at lop of each vertical for making vertical connection Spigots are drilled in two places to receive locking pins.
Base Plates made out of 150x150x6 mm welded with vertical tube pins or spigots provide plain surfaces to transfer load to ground uniformly.
Pressed coupler made out of 4mm MS sheets are used for connecting two tubes It may be Swivel Coupler for connecting tunes at any other angle.
Hydraulically operated complete shuttenng system lifted by means of heavy duty jacks and pumps which enables continuous concreting of high raised structures like chimneys, silos, overhead water tanks. etc Tulika Engineers Pvt. Ltd is competent and experienced in fabricating and manufactunng all the structural steel components of total slipform system like: yoklegs, wallform plates, lower / upper clamp, wailer clamp, jackholders, bush, level controller, etc.
When it comes to scaffolding tie rod formwork manufacturing companies, then the name of Tulika Engineers Pvt. Ltd. is counted among dependable manufacturers & suppliers of the same. We are based in Sonipat (Haryana) and our products find application in nationwide construction projects. We fabricate these products using different kinds of base metals in standard sizes and specifications. We are known for making scaffolding tie rod formworks available at reasonable prices.
Made out of 40 mm N.B."M" Tubes conforming to I.S.1161 or I.S.1239 having identical forged blades welded at both ends.
Standard Sizes : 1.0M, 1.25M, 1.5M, 2.0M or as per clients requirement.
Tulika Engineers Pvt. Ltd. is engaged in the manufacture and supply of circular column formwork, which it makes available as per the clients’ specifications and design approvals. Based in Sonipat (Haryana), we specialize in manufacturing high-quality circular column formwork that is acclaimed in the construction industry for its sturdiness, corrosion resistance, dimensional stability, and affordability. We manufacture this product using state of the art technologies as well as high-grade steel metals.
Tulika Engineers Pvt. Ltd. is acknowledged as a successful manufacturer and supplier of pier cap formwork shutter from Sonipat (Haryana). For years, we have been fulfilling the needs of buyers in the construction industry with our strong and dimensionally stable pier cap formwork shutter, which we manufacture using hi-tech equipment and technical know-how. Our product has a huge demand in the construction industry due to its strength, structure, longevity, and affordability.
Hydraulically operated complete shuttenng system lifted by means of heavy duty jacks and pumps which enables continuous concreting of high raised structures like chimneys, silos, overhead water tanks. etc Tulika Engineers Pitt. Ltd is competent and experienced in fabricating and manufactunng all the structural steel components of total slipform system like; yokiegs, wallform plates. lower / upper damp, wailer clamp, jackholders, bush, level controller, etc.
Tulika Engineers Pvt. Ltd. is competent and experienced in fabricating and manufacturing all the structural steel components of total slip form system like; yoklegs, wall form plates, lower / upper clamp, wailer clamp, jack holders, bush, level controller, etc. We present Jumping Formwork System which is hydraulically operated complete shuttering system lifted by means of shuttering system with the help of heavy duty jacks and pumps. This structure enables continuous concreting of high raised structures. etc.
Applications
We have always been praised for our innovative systems powered with high quality and excellent performance. Slipform systems offered by us are specially praised for sturdy structure and flawless performance. We can also offer these systems in accordance to customized requirements.
Tulika Engineers Pvt. Ltd. is a prestigious manufacturer and supplier in the construction industry of India, which brings forth superior grade pier formwork to cater to the needs of the public sector as well as private sector construction companies in India. We are based in Sonipat (Haryana) and fulfilling the buyers’ needs with precision-made pier formwork. Our product is dimensionally stable and meant for repeated and long-lasting use.
Tulika also undertakes design. fabricating. manufactunng and supplying of purpose made special formworks like Double adjustor panels. Haunch Plates. Splay Panels, Pipe lacketings. and steel formworks for Railway over bndges. Flyovers, Under ground piping. and other Precast Concrete elements. Tulika also undertakes on the site structural fabrication works for Godowns. Sheds, Workshop Yards, etc.
Made out of 40 N B "M" Inner pipe and 50 N.B outer pipe along with 150x150x6 mm base / head plate Each prop consists Of Inner and threaded Outer pipes along with turn handle & nut for final adjustment Props are used for supporting slab forms / under beam bottoms with adjustable heights.
Standard Sizes : 1.5m to 2 5m, 2 Orn to 3.5m, and 3.0in to 4.5m or as per client's requirement.
Specifications
Prop Type | Height | Safe Axial Load (Kg) | ||
---|---|---|---|---|
Closed | Extended | Closed | Extended | |
0T | 1.10 | 1.72 | 3500 | 3000 |
1T | 1.50 | 2.75 | 3200 | 2300 |
2T | 2.00 | 3.25 | 3000 | 2200 |
3T | 2.00 | 3.75 | 2900 | 2000 |
4T | 3.00 | 4.65 | 2300 | 1150 |