Post Buy Requirement
TL
Hubli, Karnataka, India
Add Review

Our Products

  1. Transformers 3 Products available
  2. Electric Circuit Components & Parts 19 Products available
  3. Relays & Contactors 12 Products available
  4. Electronic Development Boards 5 Products available
  5. Multimeter 4 Products available
  6. Toggle Switches 3 Products available
  7. Business And Corporate Gifts 6 Products available
  8. Adapter 3 Products available
  9. Sensors 22 Products available
  10. Others 151 Products available

Other Products / Services

RASPBERRY PI TOUCH SCREEN Monitor

  • LCD Type : TFT
Designed for Raspberry Pi, an ideal alternative solution for HDMI monitor
Supports any revision of Raspberry Pi (directly-pluggable)
Driver provided (works with custom Raspbian directly)
320480 resolution, better display
Convenient Men-Machine interface for Raspberry Pi, combined with the portable power, DIY anywhere anytime
Supports Raspbian system, enables your system to:
Take photos by touching (up to 17 camera modes)
Support software keyboard (system interaction without keyboardmouse)
High quality immersion gold surface plating
View Complete Details

SOLAR PANEL (500 MW, 4.7 V)

  • Dimensition (13.3 X 11.3) cm.
  • Imp 106 mA
  • Isc: 170 mA
Features:
High cell efficiency with quality silicon materials for long term output stability and reliability
Strictly quality control ensure the stability and reliability, totally 23 testing procedure to do quality control
High transmittance low iron tempered glass with enhanced stiffness and impact resistance
Excellent performance in harsh weather
Outstanding electrical performance under high temperature and low irradiance conditons
Maintenance:
Cleaning panels: Use warm water and a soft sponge or cloth to clean your panel and keep the controller dry
Will hail hurt my solar panel: All glass used in solar panels is toughened & factory tested to International standards. The small hail is no problem
Do the solar panel systems make any noise: No, they are not noisy
Will dirty glass on my solar panel reduce the power it creates: Yes, please keep the glass area as clean as possible
View Complete Details

16GB Sandisk Micro SD Card (CLASS 10)

Ultra 16 GB class 10 microSD card

Read Speed up to 48 Mbps

Recommended for Raspberry Pi

also comfortable with smartphone, tablets, etc

Latest version of NOOBS for Raspberry Pi
View Complete Details

8 CH VOICE RECORDER

The aPR33A series are powerful audio processor along with high performance audio analog-to-digital converters (ADCs) and digital-to-analog converters (DACs).

The aPR33A series are a fully integrated solution offering high performance and unparalleled integration with analog input, digital processing and analog output functionality.

The aPR33A series incorporates all the functionality required to perform demanding audiovoice applications.

High quality audiovoice systems with lower bill-of-material costs can be implemented with the aPR33A series because of its integrated analog data converters and full suite of quality-enhancing features such as sample-rate convertor.
View Complete Details

Coupler For 3D Printer 5mm Shaft

New Precision Aluminum Flexible Shaft Coupler

Perfect fit from 5mm steeper motor shaft to ballscrew, shaft or threaded rod 516" or 8mm

4 grub screws hold tight

Dimensions:25mm x 19mm

Aluminum material
View Complete Details

Coupler For 3D Printer 9mm Shaft

New Precision Aluminum Flexible Shaft Coupler

Perfect fit from 9mm steeper motor shaft to ballscrew,

4 grub screws hold tight

Dimensions:25mm x 19mm

Aluminum material
View Complete Details

NTC Thermistor For 3D Printer

  • Feature Fastest response time and high accuracy, Better Stability , as chip is welded with leads by alloy soldering process, High resistance and mechanical strength etc.
  • Applications Temperature sensors, Electronic thermometers and eternity calendar Etc.
NTC thermistor for temperature sensor is one where the thermistor chip is welded with leads by alloy soldering process, then partially treated by glass sealing.

The element has a bead form with good stability, small size and rapid response

Widely used in temperature sensors, electronic thermometers and eternity calendar, temperature compensation, various kinds of household appliances as well as Industrial, medical, environmental protection, weather and food processing equipment etc.
View Complete Details

Pramaan Mini 3D Printer

  • Specifications Build: Laser Cut Acrilyc, Product Footprint: 47.0 cm x 35.0 cm x 47.0 cm, Available Colors: Matt Black.
  • Printing Maximum Object Build Volume: 18cm x 18 cm x 18 cm, Filament Type: Open Source, Filament Diameter: 1.75
Pramaan Mini is based on a Prusa i3 open source design. It has been highly modified to be more professional, reliable and intelligent. It is a single nozzle printer with a build volume of 18 x 18 x18 cm3 and is ideal for makers and people starting with 3D Printing.

Pricing
Onsite Installation: Rs. 68, 000 all inclusive.
Pickup from our office: Rs.62, 000 all inclusive.
View Complete Details

Pramaan V2 3D Printer

  • Specifications Build: Powder Coated Mild Steel, Product Footprint: 57.2 cm x 53.0 cm x 53.0 cm, Available Colors: Matt Black.
  • Printing Maximum Object Build Volume: 30cm x 30 cm x 30 cm, Filament Type: Open Source Etc.
Pramaan v2 is a rugged, reliable and easy to use 3D Printer.

It is a Single Nozzle printer with a build volume of 30x30x30 cm3 and is capable of printing with the conventional materials like ABS & PLA, exquisite materials like Nylon, Flex & Metal Fills.



Support and Warranty

Warranty: 1 Year on all electronics and parts

Customer Support: Free for 1 year (1 Month on-site1 year online)
View Complete Details

Raspberry Pi 3 Kit

  • Features • Raspberry Pi 3 Model B with 1GB RAM, Quad Core CPU, • 8GB Micro SD Card with holder (Class 10). Etc
Tweak Labs Inc. Raspberry Pi Starter Kit (including Raspberry Pi 3) contains everything you need to get started with your Raspberry Pi in as little time as possible!

We've carefully compatibility tested all components, and only selected the very best manufacturer guaranteed, high-quality parts available!

You won't find a better kit at a better price, and all our kits are fully customizable from our huge range of Raspberry Pi accessories, cases and cable colours!

Take the byte today.
View Complete Details

Raspberry Pi IoT Kit

  • Description Raspberry Pi 3 Raspberry Pi Oficial Case. SD Card with adapter (16GB class 10) 5V, 2A power adaptor with micro USB cable Ethernet Cable.
Raspberry pi IOT kit helps you build your own smart devices. The Base Kit includes Raspberry pi, UNO and basic sensors and actuator which can help you start with Internet Of Things.
View Complete Details

Tweak Labs Inventor's Kit

Resistance Box 1
Arduino Uno(Made in China) 1
USB Cable 1
PIR - 1
Red LED 5
Green LED 5
White LED 5
RGB LED 1
IR Remote Controller 1
Membrane Key pad 1
9V Battery with holder 1
9g Servo Motor 1
DHT11 (Temperature & Humidity) 1
Breadboard 1
LDR (Light Dependent Resistor) 3
LCD Panel 1
Capacitor Box 2
IR receiver 1
Phototransistor 1
LM35 Temperature sensor 1
7 Segment LED 1
LM 555 - 1
Buzzer 1
Piezo Buzzer 1
Buttons Switch 1
Male headers 5
HCSR04 Ultrasonic Sensor-1
Ribbon cable 1
Jumper wires(M2M, M2F) - 10 each
5V Relay
View Complete Details

B3 Pro - LiPo Battery Charger

With the development of electric technology, we have a new design of easy compact balance charger for 23 series LiPo battery fast charging with wide AC input.

A internal 100-240V AC switch power is built in, and the high precision balance circuit can supply larger current up to 850mA series.

Double colour LED can display the process of charging (RED: charging; GREEN: full).

This charger is compact and light, especially there is separated corresponding balance port for each battery pack.
View Complete Details

DIY MINI QUADCOPTER KIT

Colour Multicolour
Included Components 4 Propeller Pairs, 1 Charger, 1 Battery, 4 Coreless Motors, 1 Transmitter, Receiver Frame, 16 Air Screws and 4 Propeller Guard with User Manual
Material Type plastic
Number of Items 32
Part Number ET-01
Power Source dc
View Complete Details

DRONE For EveryOne 1.0

  • description 1 x Glass Fiber Quad copter Frame with Integrated PCB Version, 4 x Brushless DC Out runner Motor, 4 x BLDC ESC 30 A, 2 x 10 inch x 4.5 inch Pusher and Puller Propeller Matched Pair Etc.
Tweak Labs Inc. brings you the ultimate DIY Quadcopter kit, because we believe in "Drone for EveryOne",


The DfE is a well thought out 450mm quad frame built from quality materials. The main frame is glass fiber while the arms are constructed from ultra durable polyamide nylon.

This version of the DfE features integrated PCB connections for direct soldering of your ESCs. This eliminates the need for a power distribution board or messy multi-connectors keeping your electronics layout very tidy. DfE also comes with stronger molded arms, so no more arm breakage at the motor mount on a hard landing. Assembly is a breeze with pre-threaded brass sleeves for all of the frame bolts, so no lock-nuts are required. It utilizes one size of bolt for the entire build, making the hardware very easy to keep in order and only requiring one size of hex wrench to assemble. A great feature of this frame is the large mounting tabs at the front and rear of the main frame bottom plate for mounting cameras or other accessories. This makes for a great way to take aerial video or fly FPV without the need to add any additional mounting brackets. The DfE also features colored arms (2 white and 2 red) which are great for orientation. It helps to keep you flying the right direction without the need for different colored props.
View Complete Details

DRONE For EveryOne 2.0

  • description 1 x Glass Fiber Quad copter Frame with Integrated PCB Version, 4 x Brushless DC Out runner Motor, 4 x BLDC ESC 30 A, 2 x 10 inch x 4.5 inch Pusher and Puller Propeller Matched Pair, 1 x 2200 mHz lipo battery Etc.
Tweak Labs Inc. brings you the ultimate DIY Quadcopter kit, because we believe in "Drone for EveryOne",


The DfE is a well thought out 450mm quad frame built from quality materials. The main frame is glass fiber while the arms are constructed from ultra durable polyamide nylon.

This version of the DfE features integrated PCB connections for direct soldering of your ESCs. This eliminates the need for a power distribution board or messy multi-connectors keeping your electronics layout very tidy. DfE also comes with stronger molded arms, so no more arm breakage at the motor mount on a hard landing. Assembly is a breeze with pre-threaded brass sleeves for all of the frame bolts, so no lock-nuts are required. It utilizes one size of bolt for the entire build, making the hardware very easy to keep in order and only requiring one size of hex wrench to assemble. A great feature of this frame is the large mounting tabs at the front and rear of the main frame bottom plate for mounting cameras or other accessories. This makes for a great way to take aerial video or fly FPV without the need to add any additional mounting brackets. The DfE also features colored arms (2 white and 2 red) which are great for orientation. An added LCD in the flight controller board gives the user the awesome leverage and makes sure the copter is always in control of the user.
View Complete Details

ESC 30A Brushless Motor Speed Controller

  • Weight: 25g
  • Dimensions 45 x 24 x 11mm
  • Firmware Hobbywing
  • Power input 5.6V - 16.8V (2-3 cells Li-Poly, OR 5-12 cells Ni-MH Ni-MH / Ni-Cd battery)
Feature:
Safe power function:regardless of the throttle stick in any position the motor will not start immediately
Throttle Calibration function:Adapt to different remote throttle travel difference, improve throttle response linearity, with a smooth, delicate feel and excellent speed linear speed
Low Voltage Protection Mode , Low-voltage protection threshold
View Complete Details

Fly Sky 2.4G CT6B 6-Channel Transmitter + Receiver (R6B)

  • Features FS-CT6B Transmitter, FS-R6B Receiver, Programming Cable, Bind Plug.
Features

Channels: 6 Channels

Model Type: Heli, Airplane, Glid

RF Power: Less than 20db


Code Type: 2.4Ghz No Interference

Sensitivity: 1024

Low Voltage Warning: LED

DSC Port: Yes

Charger Port: Yes

Modulation: GFSK
View Complete Details

Channel Transmitter Receiver

  • Features Six Channels , Rf Range 2.40-2.48 Ghz, Bandwidth 500 Khz, Six Channels, Rf Range 2.40-2.48 Ghz, Bandwidth 500 Khz.
Availability: In stock

6 Channels Model Type: Fixed Wing Glider Heli

Rf Range: 2.40 - 2.48 Ghz

Bandwidth: 500 Khz

Rf Power: Less Than 20d Bm (100m W)

Low Voltage Warning: Less Than 4.2 V

Dsc Port: Ps2;

Output: Ppm

Charger Port: No.
View Complete Details

IMAX B6 DIGITAL LCD RC LIPO NIMH BATTERY BALANCE CHARGER

IMAX B6 is the new intelligent multifunction charger which can charge and discharge for Lion, LiPo, LiFe (A123), Pb, NiCd and NiMH batteries. It's all-powerful in a way. It has the same functions as Isky. Specifications: Input Voltage: 11-18v Circuit power: Max Charge: 50W Max Discharge: 5W Charge Current Range: .1-5.0A Discharge current range: .1-1.0A Ni-MHNiCd cells: 1-15 Li-ionPoly cells: 1-6 Pb battery voltage: 2-20v Dimensions: 133x87x33mm
View Complete Details

Servo Tester

Fantastic device to centre your servos before installing them on you heli or plane.
Set your servo to neutral position before connecting the arms and control rods. Then you can set it on manual mode to check the throws and binding, etc. This unit beats connecting up to your receiver first and having neutral points all wrong or binding a servo and destroying it.

This unit can be used in 3 modes
Manual - you cna move the servos and check the throws manually by turning the knob
Neutral - servos are automatically set to neutral position (great of heli flyers)
Auto - this mode operates the servos and moves the servos to their extreme position automatically

Use a ESC to power up the servo tester. DO NOT plug this directly to a battery or you may end up burning this unit and also your servos
View Complete Details

3 In 1 LASER & LED

LED Laser Pointer UV LED Flashlight Keychain.
1 White LED, 1 Laser Beam, 1 Ultra Violet UV LED.
Cash-Check Function.
2 buttons to control the Laser Beam and LEDs.
LED life-time 10000 hours.
Mini and light weight, great for emergency.
Aluminum body and durable.
With clip. You can use it as keychain or clip it at your backpack.
Laser Color: Red.
Laser Output: < 5mW.
Powered by 3 x LR44 Cell Button Battery.
Size: 70 x 15 x 15mm.
Color: Random.

Additional Information:

Packaging Details : Package Includes:

1 x 3in1 Flashlight
3 x LR44 Cell Battery

View Complete Details

4 Port Usb Hub

4 Port USB HUB. Two port can be used by connecting to the usb of your laptops Computers. You can connect it with a 12V adapter to activate all four ports.
View Complete Details

Anti-Static Wrist Band

An antistatic wrist strap, ESD wrist strap, or ground bracelet is an antistatic device used to safely ground a person working on very sensitive electronic equipment, to prevent the buildup of static electricity on their body, which can result in electrostatic discharge (ESD). It is used in the electronics industry by workers working on electronic devices which can be damaged by ESD, and also sometimes by people working around explosives, to prevent electric sparks which could set off an explosion.

It consists of an elastic band offabric with fine conductive fibers woven into it, attached to a wire with a clip on the end to connect it to a ground conductor. The fibers are usually made of carbon or carbon-filled rubber, and the strap is bound with a stainless steel clasp or plate. They are usually used in conjunction with an antistatic mat on the workbench, or a special static-dissipating plastic laminate on the workbench surface.
View Complete Details

Arduino Uno R3

The Arduino Uno is a microcontroller board based on the ATmega328 .

It has 14 digital inputoutput pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.

It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

USB A to B Cable included.
View Complete Details

Small Heat Sink

In electronic systems, a heat sink is a passive heat exchanger that cools a device by dissipating heat into the surrounding medium.

A heat sink is designed to maximize its surface area in contact with the cooling medium surrounding it, such as the air. Air velocity, choice of material, protrusion design and surface treatment are factors that affect the performance of a heat sink. Heat sink attachment methods and thermal interface materials also affect the die temperature of the integrated circuit.

A heat sink transfers thermal energy from a higher temperature device to a lower temperature fluid medium. The fluid medium is frequently air, but can also be water, refrigerants or oil. If the fluid medium is water, the heat sink is frequently called a cold plate.

When the air flow through the heat sink decreases, this results in an increase in the average air temperature. This in turn increases the heat sink base temperature. And additionally, the thermal resistance of the heat sink will also increase. The net result is a higher heat sink base temperature.

The increase in heat sink thermal resistance with decrease in flow rate will be shown later in this article. The inlet air temperature relates strongly with the heat sink base temperature. If there is no air flow around the heat sink, energy cannot be transferred.
View Complete Details

Joystick Module

Quality rocker, long life, stable performance
Two analog outputs, one digital output
X, Y-axis output of the two potentiometers can be read out through the A to D converter.
two degrees of freedom, compatible with arduino sensor interface. It can also be used as a PS2 Game Joystick.
View Complete Details

Laser 2mW

The Core 5mW Green handheld laser gives you two to five times the power of standard laser pointers. More power means a brighter, clearer beam to get more attention just where you want it.
View Complete Details

MSP 430 Launchpad

  • Features 14-/20-pin DIP (N) socket Built-in flash emulation for debugging and programming, 2 programmable LEDs, 1 power LED, 1 programmable button, 1 reset button.!!
The MSP430 LaunchPad is an easy-to-use flash programmer and debugging tool for the MSP430G2xx Value Line microcontrollers. It features everything you need to start developing on an MSP430 microcontroller device. It has on-board emulation for programming and debugging and features a 1420-pin DIP socket, on-board buttons and LEDs & BoosterPack-compatible pinouts that support a wide range of plug-in modules for added functionality such as wireless, displays.

The MSP430 LaunchPad also comes with 2 MSP430 device, with up to 16kB Flash, 512B RAM, 16MHz CPU speed and integrated peripherals such as 8ch 10-bit ADC, timers, serial communication (UART, I2C & SPI)
View Complete Details

12V 60Watt Peltier Cell

  • Color White
  • Net weight: 22g -Package weight: 31g.
TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 12V 60W

Features: - Get ice cold in minutes or heat to boiling by simply reversing the polarity,

-Used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmercooler.

- Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts

-These devices must be used in conjunction with a heat sink to avoid burned

- Each device is full inspected and tested

- Fitted with 6-inch insulated leads Technical Specifications:

-Model: TEC1-12706 -Size: 40mm x 40mm x 4mm -Operates from 015.2V DC and 06A

-Operates Temperature: -30 to 70
View Complete Details

Programmable Digital Timer Module

  • *Voltage : 100/130 V AC Or 220/250 V AC
  • *Frequency : 50/60Hz
  • *Voltage : 6, 9, 12, 24 V DC/AC
Micro-controller & CMOS Quartz.
*Digital Time Switch for 7 Days - 24 Hours.
*With 8 ONOFF programs upto 56 ONOFF setting for Daily & Weekly.
*Manual Button for Temporary Override.
*LED ONOFF Indicate.
*Accurate-to-the-minute Control.
View Complete Details

SD Card Module

  • Package included: 1 x SD Card Module Slot Socket Reader
This Arduino SD Card Shield is a simple solution for transferring data to and from a standard SD card.





The pinout is directly compatible with Arduino, but can also be used with other microcontrollers. It allows you to add mass storage and data logging to your project.


Brand new and high quality

SD Card module can make your SD application more easier and simple

It is easily interfaced as a peripheral to your arduino sensor shield module

Through programming, you can read and write to the SD card using your arduino

Can be used for SD Card more eaisly, such as for MP3 Player, MCUARM system control

All SD SPI pins output, MOSI, SCK, MISO and CS

Support 5V3.3V input
View Complete Details

8MP USB Camera

Built-in Image compassion.
Automatic white balance.
Automatic color compensated.
Dynamic image E-mail.
Manual focus.
Shutter key.
View Complete Details

Variable Wattage Micro Soldering Station

  • Features Variable power, Includes built-in Soldering stand and sponge.
deal for precision small jobs like SMT and micro-electronics.

Element shaft is only 2.5mm thick with an isolated element! It can be set to high, medium or low with a continuously variable knob, and comes with a sponge tray with a sponge and a placing stand as standard.

Comes standard with an aluminium coated long life tip.

Very popular amongst jewellery manufacturers for trimmingsculpture of wax casting.
View Complete Details

NRF24L01 Wireless Module

  • Feature Worldwide 2.4GHz ISM band operation,Free license to use. 126 RF channels. High air data rate: 250kbps, 1 and 2Mbps. Transmitter: 11.3mA at 0dBm output power. Receiver: Fast AGC for improved dynamic range. Receiver: Integrated channel filters. Etc
nRF24L01p(nRF24L01+) with PA and LNA is compatible with nRF24L01+(nRF24L01p), and there are same interface. These are add a power amplifier(PA) circuit and Low Noise Amplifier(LNA) circuit, which could transmit longer distances and more stable performance for industry standard. Increased PA and LNA, RF switch, band pass filter, formed a professional full two-way RF power amplifier, making effective communication for greatly increased. The transmission distance to reach 1000 meter with 2DB Antenna at 250kbps data rate on open area.
View Complete Details

RX Current Supply

  • Features Operating voltage: 3.5 - 12V DC, Range: 20 - 200 (depending on the operating voltage), Mode: AM, Transfer rate: 4KB / s, Transmitting power: 10mW, Transmission frequency: 433MHz Etc.
With this kit it is possible 433Mhz devices such as radio-controlled sockets z. Ex. With the Raspberry Pi to switch.The modules were tested under pilight and can easily be used for this purpose.

Both modules can (not) be operated by the pin pitch of 2.54mm on a breadboard.
View Complete Details

RFID Key Chain

  • Feature Waterproof, shockproof, anti-corrosion, can be hung on channeling keychain for easy carrying, Each Keychain is printed with Unique ID Number.
  • Frequency 125Khz
Features: Waterproof, shockproof, anti-corrosion, can be hung on channeling keychain for easy carrying, Each Keychain is printed with Unique ID Number.
View Complete Details

USB RFID Smart Card Reader 125kHz

  • Applications Desktop reader / Encoders Network Access, Control Access, Control Card, Authorization Product.
BlackBox Series D10 is a small, handy and simple RFID Reader for your USB equipped terminal and laptop.This desktop reader is using USB interface for data transfer.It is usable for many different applications.
View Complete Details

ESP 8266 Breakout Board

Serial WIFI ESP8266 ESP-07ESP-12 module breakout board . This is an instuctable board where u can solder ESP8266
View Complete Details

ESP8266 Serial WiFi Witty Cloud Development Board ESP-12F Module

This is a support cloud intelligent hardware development kit, the history of the most simple and most cost-effective iot development board, don't need you to understand the knowledge of the network, the TCPIP and other complex, as long as you will C language, can use emc's wit cloud SDK quickly realize the secondary development, the DEMO board can use mobile phone flow control panel mount RGB colorful lights, mobile terminal APP, can display environment brightness by photosensitive resistance, less code as long as the modification for half an hour can make a your own remote control equipment, system generates free APP (android, IOS), open the SDK, you only need to do the APP UI interface can be developed into a finished product. Tact cloud beta instructions and ESP8266SDK: http:pan.baidu.coms1eQDaQau The SDK compile environment cygwin: http:pan.baidu.coms1kTIpKJ9 Tact cloud developer BBS: http:club.gizwits.com Tact time platform: http:site.gizwits.comzh-cndeveloper
View Complete Details

NodeMCU Internet Gateway Devic

  • Specifications On-board USB to Serial Converter, On-board Voltage Regulator, 10 GPIO pins with PWM functionality Etc.
The NodeMCU is an internet gateway device based on the esp8266 controller.

It is an ideal solution for adding internet connectivity to any embedded project.

It comes with an on-board usb to serial converter making it easy to use and is generally programmed using the lua language.
View Complete Details

SIM 808 GPS Module

SIM808 module is a GSM and GPS two-in-one function module. It is based on the latest GSMGPS module SIM808 from SIMCOM, supports GSMGPRS Quad-Band network and combines GPS technology for satellite navigation.

It features ultra-low power consumption in sleep mode and integrated with charging circuit for Li-Ion batteries, that make it get a super long standby time and convenient for projects that use rechargeable Li-Ion battery. It has high GPS receive sensitivity with 22 tracking and 66 acquisition receiver channels. Besides, it also supports A-GPS that available for indoor localization.

The module is controlled by AT command via UART and supports 3.3V and 5V logical level.
View Complete Details

SimCom SIM900A GSM / GPRS Module

Availability: In stock

GPRS module is a breakout board and minimum system of SIM900 Quad-bandSIM900A Dual-band GSMGPRS module. It can communicate with controllers via AT commands (GSM 07.07 , 07.05 and SIMCOM enhanced AT Commands). This module supports software power on and reset.
View Complete Details

XBEE 2mW Modules

  • Specifications TX Peak Current: 40 mA RX Current: 40 mA (@3.3 V) Power-down Current: < 1 μA Indoor/Urban: up to 133 ft (40 m) Outdoor line-of-sight: up to 400 ft (120 m) Etc.
XBee modules are embedded solutions providing wireless end-point connectivity to devices. These modules use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and predictable communication timing. So basically XBee is Digis own Zigbee based protocol.
View Complete Details

XBee Pro S2B 63MW Module

XBee-PRO S2B module improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. Series 2 modules allow you to create complex mesh networks. this module has the lowest current draw of any Digi RF product. However, the infrastructure of a ZigBee network is more complex and requires more configuration to fully impliment. This module can give range of 90 meters indoor or 3200meters outdoor. This XBee wireless device can be directly connected to the serial port (at 3.3V level) of your microcontroller. By using a logic level translator it can also be interfaced to 5V logic (TTL) devices having serial interface. This module supports data rates of up to 250kbps. They are designed for high-throughput(35kbps) applications requiring low latency and predictable communication timing. Series 1 and Series 2B XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2B modules.
View Complete Details

DTMF AUDIO DECODER MODULE

DTMF AUDIO DECODER MODULE based on HT9170D decoder chip, with 3.5 mm jack. HT9170D: 18-pin SOP package Operating voltage: 2.5V5.5V Minimal external components No external filter is required Low standby current (on power down mode) Excellent performance Tristate data output for MCU interface 3.58MHz crystal or ceramic resonator 1633Hz can be inhibited by the INH pin Includes 3.5 mm Audio Cable.

View Complete Details

Mini IR Remote

Works on CR2025 button batteries, capacity : 160 mAh
Working Distance: more than 8 m (effected by the surrounding environment, the receiver sensitivity, etc)
Effective Angle: 60 degrees
Surface materials: 0.125 mmPET stick
Effective button life : 20000 times.
Static current: 3-5 uA
Dynamic current: 3-5 mA
Infrared wavelength: 940Nm
Crystal: the oscillation frequency of 455 KHz
IR carrier frequency: 38KHz
Encoding: NEC encoding format
Size: 86 x 40 x 6mm
View Complete Details

TSOP Module

Infrared receiving module adopts 1838 infrared receiving head
Light resistance, strong electromagnetic interference, built-in infrared dedicated IC, can work under 500 lux light intensity
Widely used in: stereo, TV, video machine, disc machine, set-top boxes, digital photo frame, car stereo, remote control toys, satellite receivers, hard disk player, air conditioner, heater, electric fan, lighting and other home appliances
View Complete Details

Gps Modem

This GPS Receiver Modem is based on SIMCOMs SIM28MSIM28ML GPS Module. SIM28M is a stand-alone or A-GPS receiver. With built in LNA, SIM28M can relax antenna requirement and dont need for external LNA. SIM28M can track as low as -165dBm signal even without network assistance. SIM28M has excellent low power consumption characteristics (acquisition 17mA, tracking 16mA). SIM28M supports various location and navigation applications, including autonomous GPS, QZSS, SBAS ranging (WASS, EGNOS, GAGAN, MSAS), DGPS and A-GPS.

The antenna circuitry built in this modem is capable of receiving signals even at difficult locations where other modem fails to receive signal. Use an external antenna of 1575.42MHz.
View Complete Details

GPS Module SKG13

GPS receiver module high sensitivity GPS module:-165dBm low power consumption small size support walk model The Skylab SKG13 series is a complete gps receiver module that features super sensitivity, ultra low power and small form factor. The GPS signal is applied to the antenna input of module, and a complete serial data message with position, velocity and time information is presented at the serial interface with NMEA protocol or custom protocol. It is based on the high performance features of the MediaTek 3329 single-chip architecture, Its -165dBm tracking sensitivity extends positioning coverage into place like urban canyons and dense foliage environment where the GPS was not possible before. The small form factor and low power consumption make the module easy to integrate into portable device like PNDs, mobile phones, cameras and vehicle navigation systems. Dual Power Source, Serial and TTL output Free GPS Active Antenna.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Samar (Tweak Labs Inc)
  • 1st Floor, Start Up Street, R. H. Kulkarni Lecture Hall Complex, BVBCET, Vidyanagar, Vidya Nagar, Hubli, Karnataka - 580021, India
  • Share us via