Kolkata, West Bengal, India
Our Products
WEDGE CLAMP
Suspension Clamp for AB Cable
Suspension and Dead End Clamp with Eye Hooks.
PG Clamp for ACSR Conductor
Dead End Clamp For AB Cable
Helically formed Dead Ends for AAC &ACSR Conductors (Bare and Insulated).
Tension Clamps (Compression Type) for Earth Wire / Ground Wire.
Ground Wire Clamp for Earth Wire/ Ground Wire.
Terminal Clamps, 2-Way angle clamp connector & T-Clamp.
Tension Clamps (with Aluminium Casing) for Earth Wire / Ground Wire.
Donation For Poor Old People
Price List
sample --------------------$2 usd 100 ml---------------------$40 usd 250 ml --------------------$80 usd 500 ml---------------------$160 usd 1 kg ------------------------$300 usd
Technical Specifications
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Technical Specifications:
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Specifications
|
PLATFORM SIZE (MM) |
630 x 560 |
2 MTRS. |
4 MTRS. |
|
RATED LOAD (HOIST CAPACITY) (KG.) |
230 |
460 |
460 |
|
PERMITTED LOAD (KG.) |
160 |
220 |
260 |
|
PEDAL HOIST |
1 NO. |
2 NOS. |
2 NOS. |
|
BALANCE WEIGHT SUPPLIED (CONCRETE COMPRESSED BLOCK) (KG.) |
250 |
350 |
400 |
|
WIRE ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY LOCK WITH ANTI TILT LOCK (FOR 7.5MM) |
1 NO. |
2 NOS. |
2 NOS. |
|
SUSPENSION DEVICE |
1 NO. |
2 NOS. |
2 NOS. |
| Alloy No. | Color/Shade | Usage(K) | Application | Melting Range deg C | Remarks/comments |
| 1005 | White | 9>14K | C | 1010-965 | High reusability, Ni-Safe |
| 1401 | White | 9>14K | C | 935-890 | Ni Safe with better reusability |
| 1404 | White(14K) | 9>18K | C,H | 950-880 | For H/S & W/S; Ni Safe, high reusability & workability, high fluidity |
| 1405 | Bright White | 9>18K | C,H | 950-1000 | High Nickel but Ni Safe, High fluidity, better luster, Rhodium optional |
| 1801 | White | 18K | C | 980-1020 | Ni Safe, good reusability, low Silicon |
| 5000 | Medium White | 9>18K | C,H,R | 960-990 | For H/S & W/S; Ni Safe, high reusability & workability, low Silicon |
| 5001 | White | 9>18K | C,H | 970-1000 | For H/S & W/S; Ni Safe, good reusability and workability, High fluidity |
| 5002 | Medium White | 9>18K | C,H,R | 970-940 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
| 5003 | Medium White | 9>18K | C,H | 970-950 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
|
S.no. |
Parameters |
Specifications |
|
1. |
Description |
Light creamy to white color fine free flowing powder |
|
2. |
Solubility |
Insoluble in cold water& in alcohol |
|
3. |
pH , 10 % solution ,w/v |
5 to 7 |
|
4. |
Viscosity of 3% solution in Brookfield viscometer LVDV II PRO Model Temp: 800c, Spindle No:3 , RPM : 20 |
2500 to 3500 cPs |
|
5. |
Moisture content, % w/w |
16 % |
|
6. |
Ash content,% w/w on DB |
Max 0.50% |
|
7. |
Bulk density (gm/ml) |
0.65 to 1.0 |
|
8. |
Sieve retention(100 mesh) |
Max 0.5% |
|
9. |
Starch ,% w/w on DB |
Min 95 |
|
10. |
Free Acidity, (ml of 0.1 N NaOH/100 ) |
Max 40.00 |
|
11. |
Sulphur Dioxide , ppm |
Max 80.00 |
| SIZE | Deameter of Toe (mm) |
| S | 15 |
| M | 20 |
| L | 25 |
| Mode | Programs | Power | Load | Operating Frequency |
| Soft | 99 | 150W | 300 Ω | 1Mhz |
| Force | 99 | 150W | 300 Ω | 1Mhz |
| Mode | Programs | Power | Load | Operating Frequency |
| Bi-coag | 99 | 120W | 300 Ω | 1Mhz |
| Bi-cut | 99 | 120W | 300 Ω | 1Mhz |
Specification:
| Model | 161 | 191 | 171 | 172 |
| Display | 3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
| Accuracy | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit |
| Conductivity (EC) | ||||
| Range | 0 - 200 μS 0 - 2, 0 - 20, 0 - 200 mS |
0 - 20 mS | 0 - 20 mS | 0 - 20 mS |
| Resolution | 0.1 μS | 0.01 mS (10 μS) |
0.01 mS (10 μS) |
0.01 mS (10 μS) |
| Range Selection | Manual | - | - | - |
| Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
| Cell Constant | Adjustable (0.4 - 1.5) |
Pre-Adjusted | Pre-Adjusted | Pre-Adjusted |
| Temp. Coefficient | 2% | 2% | 2% | 2% |
| Temp. Comp. | Adjustable from Table | Adjustable from Table | Adjustable from Table | Adjustable from Table |
| Reference Temp. | 25 oC | 25 oC | 25 oC | 25 oC |
Donation For Poor Old People
Price List
sample --------------------$2 usd 100 ml---------------------$40 usd 250 ml --------------------$80 usd 500 ml---------------------$160 usd 1 kg ------------------------$300 usd
Technical Specifications
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Technical Specifications:
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Specifications
|
PLATFORM SIZE (MM) |
630 x 560 |
2 MTRS. |
4 MTRS. |
|
RATED LOAD (HOIST CAPACITY) (KG.) |
230 |
460 |
460 |
|
PERMITTED LOAD (KG.) |
160 |
220 |
260 |
|
PEDAL HOIST |
1 NO. |
2 NOS. |
2 NOS. |
|
BALANCE WEIGHT SUPPLIED (CONCRETE COMPRESSED BLOCK) (KG.) |
250 |
350 |
400 |
|
WIRE ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY LOCK WITH ANTI TILT LOCK (FOR 7.5MM) |
1 NO. |
2 NOS. |
2 NOS. |
|
SUSPENSION DEVICE |
1 NO. |
2 NOS. |
2 NOS. |
| Alloy No. | Color/Shade | Usage(K) | Application | Melting Range deg C | Remarks/comments |
| 1005 | White | 9>14K | C | 1010-965 | High reusability, Ni-Safe |
| 1401 | White | 9>14K | C | 935-890 | Ni Safe with better reusability |
| 1404 | White(14K) | 9>18K | C,H | 950-880 | For H/S & W/S; Ni Safe, high reusability & workability, high fluidity |
| 1405 | Bright White | 9>18K | C,H | 950-1000 | High Nickel but Ni Safe, High fluidity, better luster, Rhodium optional |
| 1801 | White | 18K | C | 980-1020 | Ni Safe, good reusability, low Silicon |
| 5000 | Medium White | 9>18K | C,H,R | 960-990 | For H/S & W/S; Ni Safe, high reusability & workability, low Silicon |
| 5001 | White | 9>18K | C,H | 970-1000 | For H/S & W/S; Ni Safe, good reusability and workability, High fluidity |
| 5002 | Medium White | 9>18K | C,H,R | 970-940 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
| 5003 | Medium White | 9>18K | C,H | 970-950 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
|
S.no. |
Parameters |
Specifications |
|
1. |
Description |
Light creamy to white color fine free flowing powder |
|
2. |
Solubility |
Insoluble in cold water& in alcohol |
|
3. |
pH , 10 % solution ,w/v |
5 to 7 |
|
4. |
Viscosity of 3% solution in Brookfield viscometer LVDV II PRO Model Temp: 800c, Spindle No:3 , RPM : 20 |
2500 to 3500 cPs |
|
5. |
Moisture content, % w/w |
16 % |
|
6. |
Ash content,% w/w on DB |
Max 0.50% |
|
7. |
Bulk density (gm/ml) |
0.65 to 1.0 |
|
8. |
Sieve retention(100 mesh) |
Max 0.5% |
|
9. |
Starch ,% w/w on DB |
Min 95 |
|
10. |
Free Acidity, (ml of 0.1 N NaOH/100 ) |
Max 40.00 |
|
11. |
Sulphur Dioxide , ppm |
Max 80.00 |
| SIZE | Deameter of Toe (mm) |
| S | 15 |
| M | 20 |
| L | 25 |
| Mode | Programs | Power | Load | Operating Frequency |
| Soft | 99 | 150W | 300 Ω | 1Mhz |
| Force | 99 | 150W | 300 Ω | 1Mhz |
| Mode | Programs | Power | Load | Operating Frequency |
| Bi-coag | 99 | 120W | 300 Ω | 1Mhz |
| Bi-cut | 99 | 120W | 300 Ω | 1Mhz |
Specification:
| Model | 161 | 191 | 171 | 172 |
| Display | 3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
| Accuracy | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit |
| Conductivity (EC) | ||||
| Range | 0 - 200 μS 0 - 2, 0 - 20, 0 - 200 mS |
0 - 20 mS | 0 - 20 mS | 0 - 20 mS |
| Resolution | 0.1 μS | 0.01 mS (10 μS) |
0.01 mS (10 μS) |
0.01 mS (10 μS) |
| Range Selection | Manual | - | - | - |
| Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
| Cell Constant | Adjustable (0.4 - 1.5) |
Pre-Adjusted | Pre-Adjusted | Pre-Adjusted |
| Temp. Coefficient | 2% | 2% | 2% | 2% |
| Temp. Comp. | Adjustable from Table | Adjustable from Table | Adjustable from Table | Adjustable from Table |
| Reference Temp. | 25 oC | 25 oC | 25 oC | 25 oC |
Donation For Poor Old People
Price List
sample --------------------$2 usd 100 ml---------------------$40 usd 250 ml --------------------$80 usd 500 ml---------------------$160 usd 1 kg ------------------------$300 usd
Technical Specifications
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Technical Specifications:
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Specifications
|
PLATFORM SIZE (MM) |
630 x 560 |
2 MTRS. |
4 MTRS. |
|
RATED LOAD (HOIST CAPACITY) (KG.) |
230 |
460 |
460 |
|
PERMITTED LOAD (KG.) |
160 |
220 |
260 |
|
PEDAL HOIST |
1 NO. |
2 NOS. |
2 NOS. |
|
BALANCE WEIGHT SUPPLIED (CONCRETE COMPRESSED BLOCK) (KG.) |
250 |
350 |
400 |
|
WIRE ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY LOCK WITH ANTI TILT LOCK (FOR 7.5MM) |
1 NO. |
2 NOS. |
2 NOS. |
|
SUSPENSION DEVICE |
1 NO. |
2 NOS. |
2 NOS. |
| Alloy No. | Color/Shade | Usage(K) | Application | Melting Range deg C | Remarks/comments |
| 1005 | White | 9>14K | C | 1010-965 | High reusability, Ni-Safe |
| 1401 | White | 9>14K | C | 935-890 | Ni Safe with better reusability |
| 1404 | White(14K) | 9>18K | C,H | 950-880 | For H/S & W/S; Ni Safe, high reusability & workability, high fluidity |
| 1405 | Bright White | 9>18K | C,H | 950-1000 | High Nickel but Ni Safe, High fluidity, better luster, Rhodium optional |
| 1801 | White | 18K | C | 980-1020 | Ni Safe, good reusability, low Silicon |
| 5000 | Medium White | 9>18K | C,H,R | 960-990 | For H/S & W/S; Ni Safe, high reusability & workability, low Silicon |
| 5001 | White | 9>18K | C,H | 970-1000 | For H/S & W/S; Ni Safe, good reusability and workability, High fluidity |
| 5002 | Medium White | 9>18K | C,H,R | 970-940 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
| 5003 | Medium White | 9>18K | C,H | 970-950 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
|
S.no. |
Parameters |
Specifications |
|
1. |
Description |
Light creamy to white color fine free flowing powder |
|
2. |
Solubility |
Insoluble in cold water& in alcohol |
|
3. |
pH , 10 % solution ,w/v |
5 to 7 |
|
4. |
Viscosity of 3% solution in Brookfield viscometer LVDV II PRO Model Temp: 800c, Spindle No:3 , RPM : 20 |
2500 to 3500 cPs |
|
5. |
Moisture content, % w/w |
16 % |
|
6. |
Ash content,% w/w on DB |
Max 0.50% |
|
7. |
Bulk density (gm/ml) |
0.65 to 1.0 |
|
8. |
Sieve retention(100 mesh) |
Max 0.5% |
|
9. |
Starch ,% w/w on DB |
Min 95 |
|
10. |
Free Acidity, (ml of 0.1 N NaOH/100 ) |
Max 40.00 |
|
11. |
Sulphur Dioxide , ppm |
Max 80.00 |
| SIZE | Deameter of Toe (mm) |
| S | 15 |
| M | 20 |
| L | 25 |
| Mode | Programs | Power | Load | Operating Frequency |
| Soft | 99 | 150W | 300 Ω | 1Mhz |
| Force | 99 | 150W | 300 Ω | 1Mhz |
| Mode | Programs | Power | Load | Operating Frequency |
| Bi-coag | 99 | 120W | 300 Ω | 1Mhz |
| Bi-cut | 99 | 120W | 300 Ω | 1Mhz |
Specification:
| Model | 161 | 191 | 171 | 172 |
| Display | 3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
| Accuracy | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit |
| Conductivity (EC) | ||||
| Range | 0 - 200 μS 0 - 2, 0 - 20, 0 - 200 mS |
0 - 20 mS | 0 - 20 mS | 0 - 20 mS |
| Resolution | 0.1 μS | 0.01 mS (10 μS) |
0.01 mS (10 μS) |
0.01 mS (10 μS) |
| Range Selection | Manual | - | - | - |
| Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
| Cell Constant | Adjustable (0.4 - 1.5) |
Pre-Adjusted | Pre-Adjusted | Pre-Adjusted |
| Temp. Coefficient | 2% | 2% | 2% | 2% |
| Temp. Comp. | Adjustable from Table | Adjustable from Table | Adjustable from Table | Adjustable from Table |
| Reference Temp. | 25 oC | 25 oC | 25 oC | 25 oC |
Donation For Poor Old People
Price List
sample --------------------$2 usd 100 ml---------------------$40 usd 250 ml --------------------$80 usd 500 ml---------------------$160 usd 1 kg ------------------------$300 usd
Technical Specifications
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Technical Specifications:
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Specifications
|
PLATFORM SIZE (MM) |
630 x 560 |
2 MTRS. |
4 MTRS. |
|
RATED LOAD (HOIST CAPACITY) (KG.) |
230 |
460 |
460 |
|
PERMITTED LOAD (KG.) |
160 |
220 |
260 |
|
PEDAL HOIST |
1 NO. |
2 NOS. |
2 NOS. |
|
BALANCE WEIGHT SUPPLIED (CONCRETE COMPRESSED BLOCK) (KG.) |
250 |
350 |
400 |
|
WIRE ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY LOCK WITH ANTI TILT LOCK (FOR 7.5MM) |
1 NO. |
2 NOS. |
2 NOS. |
|
SUSPENSION DEVICE |
1 NO. |
2 NOS. |
2 NOS. |
| Alloy No. | Color/Shade | Usage(K) | Application | Melting Range deg C | Remarks/comments |
| 1005 | White | 9>14K | C | 1010-965 | High reusability, Ni-Safe |
| 1401 | White | 9>14K | C | 935-890 | Ni Safe with better reusability |
| 1404 | White(14K) | 9>18K | C,H | 950-880 | For H/S & W/S; Ni Safe, high reusability & workability, high fluidity |
| 1405 | Bright White | 9>18K | C,H | 950-1000 | High Nickel but Ni Safe, High fluidity, better luster, Rhodium optional |
| 1801 | White | 18K | C | 980-1020 | Ni Safe, good reusability, low Silicon |
| 5000 | Medium White | 9>18K | C,H,R | 960-990 | For H/S & W/S; Ni Safe, high reusability & workability, low Silicon |
| 5001 | White | 9>18K | C,H | 970-1000 | For H/S & W/S; Ni Safe, good reusability and workability, High fluidity |
| 5002 | Medium White | 9>18K | C,H,R | 970-940 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
| 5003 | Medium White | 9>18K | C,H | 970-950 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
|
S.no. |
Parameters |
Specifications |
|
1. |
Description |
Light creamy to white color fine free flowing powder |
|
2. |
Solubility |
Insoluble in cold water& in alcohol |
|
3. |
pH , 10 % solution ,w/v |
5 to 7 |
|
4. |
Viscosity of 3% solution in Brookfield viscometer LVDV II PRO Model Temp: 800c, Spindle No:3 , RPM : 20 |
2500 to 3500 cPs |
|
5. |
Moisture content, % w/w |
16 % |
|
6. |
Ash content,% w/w on DB |
Max 0.50% |
|
7. |
Bulk density (gm/ml) |
0.65 to 1.0 |
|
8. |
Sieve retention(100 mesh) |
Max 0.5% |
|
9. |
Starch ,% w/w on DB |
Min 95 |
|
10. |
Free Acidity, (ml of 0.1 N NaOH/100 ) |
Max 40.00 |
|
11. |
Sulphur Dioxide , ppm |
Max 80.00 |
| SIZE | Deameter of Toe (mm) |
| S | 15 |
| M | 20 |
| L | 25 |
| Mode | Programs | Power | Load | Operating Frequency |
| Soft | 99 | 150W | 300 Ω | 1Mhz |
| Force | 99 | 150W | 300 Ω | 1Mhz |
| Mode | Programs | Power | Load | Operating Frequency |
| Bi-coag | 99 | 120W | 300 Ω | 1Mhz |
| Bi-cut | 99 | 120W | 300 Ω | 1Mhz |
Specification:
| Model | 161 | 191 | 171 | 172 |
| Display | 3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
| Accuracy | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit |
| Conductivity (EC) | ||||
| Range | 0 - 200 μS 0 - 2, 0 - 20, 0 - 200 mS |
0 - 20 mS | 0 - 20 mS | 0 - 20 mS |
| Resolution | 0.1 μS | 0.01 mS (10 μS) |
0.01 mS (10 μS) |
0.01 mS (10 μS) |
| Range Selection | Manual | - | - | - |
| Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
| Cell Constant | Adjustable (0.4 - 1.5) |
Pre-Adjusted | Pre-Adjusted | Pre-Adjusted |
| Temp. Coefficient | 2% | 2% | 2% | 2% |
| Temp. Comp. | Adjustable from Table | Adjustable from Table | Adjustable from Table | Adjustable from Table |
| Reference Temp. | 25 oC | 25 oC | 25 oC | 25 oC |
Donation For Poor Old People
Price List
sample --------------------$2 usd 100 ml---------------------$40 usd 250 ml --------------------$80 usd 500 ml---------------------$160 usd 1 kg ------------------------$300 usd
Technical Specifications
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Technical Specifications:
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Specifications
|
PLATFORM SIZE (MM) |
630 x 560 |
2 MTRS. |
4 MTRS. |
|
RATED LOAD (HOIST CAPACITY) (KG.) |
230 |
460 |
460 |
|
PERMITTED LOAD (KG.) |
160 |
220 |
260 |
|
PEDAL HOIST |
1 NO. |
2 NOS. |
2 NOS. |
|
BALANCE WEIGHT SUPPLIED (CONCRETE COMPRESSED BLOCK) (KG.) |
250 |
350 |
400 |
|
WIRE ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY LOCK WITH ANTI TILT LOCK (FOR 7.5MM) |
1 NO. |
2 NOS. |
2 NOS. |
|
SUSPENSION DEVICE |
1 NO. |
2 NOS. |
2 NOS. |
| Alloy No. | Color/Shade | Usage(K) | Application | Melting Range deg C | Remarks/comments |
| 1005 | White | 9>14K | C | 1010-965 | High reusability, Ni-Safe |
| 1401 | White | 9>14K | C | 935-890 | Ni Safe with better reusability |
| 1404 | White(14K) | 9>18K | C,H | 950-880 | For H/S & W/S; Ni Safe, high reusability & workability, high fluidity |
| 1405 | Bright White | 9>18K | C,H | 950-1000 | High Nickel but Ni Safe, High fluidity, better luster, Rhodium optional |
| 1801 | White | 18K | C | 980-1020 | Ni Safe, good reusability, low Silicon |
| 5000 | Medium White | 9>18K | C,H,R | 960-990 | For H/S & W/S; Ni Safe, high reusability & workability, low Silicon |
| 5001 | White | 9>18K | C,H | 970-1000 | For H/S & W/S; Ni Safe, good reusability and workability, High fluidity |
| 5002 | Medium White | 9>18K | C,H,R | 970-940 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
| 5003 | Medium White | 9>18K | C,H | 970-950 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
|
S.no. |
Parameters |
Specifications |
|
1. |
Description |
Light creamy to white color fine free flowing powder |
|
2. |
Solubility |
Insoluble in cold water& in alcohol |
|
3. |
pH , 10 % solution ,w/v |
5 to 7 |
|
4. |
Viscosity of 3% solution in Brookfield viscometer LVDV II PRO Model Temp: 800c, Spindle No:3 , RPM : 20 |
2500 to 3500 cPs |
|
5. |
Moisture content, % w/w |
16 % |
|
6. |
Ash content,% w/w on DB |
Max 0.50% |
|
7. |
Bulk density (gm/ml) |
0.65 to 1.0 |
|
8. |
Sieve retention(100 mesh) |
Max 0.5% |
|
9. |
Starch ,% w/w on DB |
Min 95 |
|
10. |
Free Acidity, (ml of 0.1 N NaOH/100 ) |
Max 40.00 |
|
11. |
Sulphur Dioxide , ppm |
Max 80.00 |
| SIZE | Deameter of Toe (mm) |
| S | 15 |
| M | 20 |
| L | 25 |
| Mode | Programs | Power | Load | Operating Frequency |
| Soft | 99 | 150W | 300 Ω | 1Mhz |
| Force | 99 | 150W | 300 Ω | 1Mhz |
| Mode | Programs | Power | Load | Operating Frequency |
| Bi-coag | 99 | 120W | 300 Ω | 1Mhz |
| Bi-cut | 99 | 120W | 300 Ω | 1Mhz |
Specification:
| Model | 161 | 191 | 171 | 172 |
| Display | 3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
| Accuracy | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit |
| Conductivity (EC) | ||||
| Range | 0 - 200 μS 0 - 2, 0 - 20, 0 - 200 mS |
0 - 20 mS | 0 - 20 mS | 0 - 20 mS |
| Resolution | 0.1 μS | 0.01 mS (10 μS) |
0.01 mS (10 μS) |
0.01 mS (10 μS) |
| Range Selection | Manual | - | - | - |
| Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
| Cell Constant | Adjustable (0.4 - 1.5) |
Pre-Adjusted | Pre-Adjusted | Pre-Adjusted |
| Temp. Coefficient | 2% | 2% | 2% | 2% |
| Temp. Comp. | Adjustable from Table | Adjustable from Table | Adjustable from Table | Adjustable from Table |
| Reference Temp. | 25 oC | 25 oC | 25 oC | 25 oC |
Donation For Poor Old People
Price List
sample --------------------$2 usd 100 ml---------------------$40 usd 250 ml --------------------$80 usd 500 ml---------------------$160 usd 1 kg ------------------------$300 usd
Technical Specifications
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Technical Specifications:
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Specifications
|
PLATFORM SIZE (MM) |
630 x 560 |
2 MTRS. |
4 MTRS. |
|
RATED LOAD (HOIST CAPACITY) (KG.) |
230 |
460 |
460 |
|
PERMITTED LOAD (KG.) |
160 |
220 |
260 |
|
PEDAL HOIST |
1 NO. |
2 NOS. |
2 NOS. |
|
BALANCE WEIGHT SUPPLIED (CONCRETE COMPRESSED BLOCK) (KG.) |
250 |
350 |
400 |
|
WIRE ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY LOCK WITH ANTI TILT LOCK (FOR 7.5MM) |
1 NO. |
2 NOS. |
2 NOS. |
|
SUSPENSION DEVICE |
1 NO. |
2 NOS. |
2 NOS. |
| Alloy No. | Color/Shade | Usage(K) | Application | Melting Range deg C | Remarks/comments |
| 1005 | White | 9>14K | C | 1010-965 | High reusability, Ni-Safe |
| 1401 | White | 9>14K | C | 935-890 | Ni Safe with better reusability |
| 1404 | White(14K) | 9>18K | C,H | 950-880 | For H/S & W/S; Ni Safe, high reusability & workability, high fluidity |
| 1405 | Bright White | 9>18K | C,H | 950-1000 | High Nickel but Ni Safe, High fluidity, better luster, Rhodium optional |
| 1801 | White | 18K | C | 980-1020 | Ni Safe, good reusability, low Silicon |
| 5000 | Medium White | 9>18K | C,H,R | 960-990 | For H/S & W/S; Ni Safe, high reusability & workability, low Silicon |
| 5001 | White | 9>18K | C,H | 970-1000 | For H/S & W/S; Ni Safe, good reusability and workability, High fluidity |
| 5002 | Medium White | 9>18K | C,H,R | 970-940 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
| 5003 | Medium White | 9>18K | C,H | 970-950 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
|
S.no. |
Parameters |
Specifications |
|
1. |
Description |
Light creamy to white color fine free flowing powder |
|
2. |
Solubility |
Insoluble in cold water& in alcohol |
|
3. |
pH , 10 % solution ,w/v |
5 to 7 |
|
4. |
Viscosity of 3% solution in Brookfield viscometer LVDV II PRO Model Temp: 800c, Spindle No:3 , RPM : 20 |
2500 to 3500 cPs |
|
5. |
Moisture content, % w/w |
16 % |
|
6. |
Ash content,% w/w on DB |
Max 0.50% |
|
7. |
Bulk density (gm/ml) |
0.65 to 1.0 |
|
8. |
Sieve retention(100 mesh) |
Max 0.5% |
|
9. |
Starch ,% w/w on DB |
Min 95 |
|
10. |
Free Acidity, (ml of 0.1 N NaOH/100 ) |
Max 40.00 |
|
11. |
Sulphur Dioxide , ppm |
Max 80.00 |
| SIZE | Deameter of Toe (mm) |
| S | 15 |
| M | 20 |
| L | 25 |
| Mode | Programs | Power | Load | Operating Frequency |
| Soft | 99 | 150W | 300 Ω | 1Mhz |
| Force | 99 | 150W | 300 Ω | 1Mhz |
| Mode | Programs | Power | Load | Operating Frequency |
| Bi-coag | 99 | 120W | 300 Ω | 1Mhz |
| Bi-cut | 99 | 120W | 300 Ω | 1Mhz |
Specification:
| Model | 161 | 191 | 171 | 172 |
| Display | 3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
| Accuracy | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit |
| Conductivity (EC) | ||||
| Range | 0 - 200 μS 0 - 2, 0 - 20, 0 - 200 mS |
0 - 20 mS | 0 - 20 mS | 0 - 20 mS |
| Resolution | 0.1 μS | 0.01 mS (10 μS) |
0.01 mS (10 μS) |
0.01 mS (10 μS) |
| Range Selection | Manual | - | - | - |
| Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
| Cell Constant | Adjustable (0.4 - 1.5) |
Pre-Adjusted | Pre-Adjusted | Pre-Adjusted |
| Temp. Coefficient | 2% | 2% | 2% | 2% |
| Temp. Comp. | Adjustable from Table | Adjustable from Table | Adjustable from Table | Adjustable from Table |
| Reference Temp. | 25 oC | 25 oC | 25 oC | 25 oC |
Donation For Poor Old People
Price List
sample --------------------$2 usd 100 ml---------------------$40 usd 250 ml --------------------$80 usd 500 ml---------------------$160 usd 1 kg ------------------------$300 usd
Technical Specifications
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Technical Specifications:
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Specifications
|
PLATFORM SIZE (MM) |
630 x 560 |
2 MTRS. |
4 MTRS. |
|
RATED LOAD (HOIST CAPACITY) (KG.) |
230 |
460 |
460 |
|
PERMITTED LOAD (KG.) |
160 |
220 |
260 |
|
PEDAL HOIST |
1 NO. |
2 NOS. |
2 NOS. |
|
BALANCE WEIGHT SUPPLIED (CONCRETE COMPRESSED BLOCK) (KG.) |
250 |
350 |
400 |
|
WIRE ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY LOCK WITH ANTI TILT LOCK (FOR 7.5MM) |
1 NO. |
2 NOS. |
2 NOS. |
|
SUSPENSION DEVICE |
1 NO. |
2 NOS. |
2 NOS. |
| Alloy No. | Color/Shade | Usage(K) | Application | Melting Range deg C | Remarks/comments |
| 1005 | White | 9>14K | C | 1010-965 | High reusability, Ni-Safe |
| 1401 | White | 9>14K | C | 935-890 | Ni Safe with better reusability |
| 1404 | White(14K) | 9>18K | C,H | 950-880 | For H/S & W/S; Ni Safe, high reusability & workability, high fluidity |
| 1405 | Bright White | 9>18K | C,H | 950-1000 | High Nickel but Ni Safe, High fluidity, better luster, Rhodium optional |
| 1801 | White | 18K | C | 980-1020 | Ni Safe, good reusability, low Silicon |
| 5000 | Medium White | 9>18K | C,H,R | 960-990 | For H/S & W/S; Ni Safe, high reusability & workability, low Silicon |
| 5001 | White | 9>18K | C,H | 970-1000 | For H/S & W/S; Ni Safe, good reusability and workability, High fluidity |
| 5002 | Medium White | 9>18K | C,H,R | 970-940 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
| 5003 | Medium White | 9>18K | C,H | 970-950 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
|
S.no. |
Parameters |
Specifications |
|
1. |
Description |
Light creamy to white color fine free flowing powder |
|
2. |
Solubility |
Insoluble in cold water& in alcohol |
|
3. |
pH , 10 % solution ,w/v |
5 to 7 |
|
4. |
Viscosity of 3% solution in Brookfield viscometer LVDV II PRO Model Temp: 800c, Spindle No:3 , RPM : 20 |
2500 to 3500 cPs |
|
5. |
Moisture content, % w/w |
16 % |
|
6. |
Ash content,% w/w on DB |
Max 0.50% |
|
7. |
Bulk density (gm/ml) |
0.65 to 1.0 |
|
8. |
Sieve retention(100 mesh) |
Max 0.5% |
|
9. |
Starch ,% w/w on DB |
Min 95 |
|
10. |
Free Acidity, (ml of 0.1 N NaOH/100 ) |
Max 40.00 |
|
11. |
Sulphur Dioxide , ppm |
Max 80.00 |
| SIZE | Deameter of Toe (mm) |
| S | 15 |
| M | 20 |
| L | 25 |
| Mode | Programs | Power | Load | Operating Frequency |
| Soft | 99 | 150W | 300 Ω | 1Mhz |
| Force | 99 | 150W | 300 Ω | 1Mhz |
| Mode | Programs | Power | Load | Operating Frequency |
| Bi-coag | 99 | 120W | 300 Ω | 1Mhz |
| Bi-cut | 99 | 120W | 300 Ω | 1Mhz |
Specification:
| Model | 161 | 191 | 171 | 172 |
| Display | 3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
| Accuracy | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit |
| Conductivity (EC) | ||||
| Range | 0 - 200 μS 0 - 2, 0 - 20, 0 - 200 mS |
0 - 20 mS | 0 - 20 mS | 0 - 20 mS |
| Resolution | 0.1 μS | 0.01 mS (10 μS) |
0.01 mS (10 μS) |
0.01 mS (10 μS) |
| Range Selection | Manual | - | - | - |
| Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
| Cell Constant | Adjustable (0.4 - 1.5) |
Pre-Adjusted | Pre-Adjusted | Pre-Adjusted |
| Temp. Coefficient | 2% | 2% | 2% | 2% |
| Temp. Comp. | Adjustable from Table | Adjustable from Table | Adjustable from Table | Adjustable from Table |
| Reference Temp. | 25 oC | 25 oC | 25 oC | 25 oC |
Donation For Poor Old People
Price List
sample --------------------$2 usd 100 ml---------------------$40 usd 250 ml --------------------$80 usd 500 ml---------------------$160 usd 1 kg ------------------------$300 usd
Technical Specifications
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Technical Specifications:
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Specifications
|
PLATFORM SIZE (MM) |
630 x 560 |
2 MTRS. |
4 MTRS. |
|
RATED LOAD (HOIST CAPACITY) (KG.) |
230 |
460 |
460 |
|
PERMITTED LOAD (KG.) |
160 |
220 |
260 |
|
PEDAL HOIST |
1 NO. |
2 NOS. |
2 NOS. |
|
BALANCE WEIGHT SUPPLIED (CONCRETE COMPRESSED BLOCK) (KG.) |
250 |
350 |
400 |
|
WIRE ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY LOCK WITH ANTI TILT LOCK (FOR 7.5MM) |
1 NO. |
2 NOS. |
2 NOS. |
|
SUSPENSION DEVICE |
1 NO. |
2 NOS. |
2 NOS. |
| Alloy No. | Color/Shade | Usage(K) | Application | Melting Range deg C | Remarks/comments |
| 1005 | White | 9>14K | C | 1010-965 | High reusability, Ni-Safe |
| 1401 | White | 9>14K | C | 935-890 | Ni Safe with better reusability |
| 1404 | White(14K) | 9>18K | C,H | 950-880 | For H/S & W/S; Ni Safe, high reusability & workability, high fluidity |
| 1405 | Bright White | 9>18K | C,H | 950-1000 | High Nickel but Ni Safe, High fluidity, better luster, Rhodium optional |
| 1801 | White | 18K | C | 980-1020 | Ni Safe, good reusability, low Silicon |
| 5000 | Medium White | 9>18K | C,H,R | 960-990 | For H/S & W/S; Ni Safe, high reusability & workability, low Silicon |
| 5001 | White | 9>18K | C,H | 970-1000 | For H/S & W/S; Ni Safe, good reusability and workability, High fluidity |
| 5002 | Medium White | 9>18K | C,H,R | 970-940 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
| 5003 | Medium White | 9>18K | C,H | 970-950 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
|
S.no. |
Parameters |
Specifications |
|
1. |
Description |
Light creamy to white color fine free flowing powder |
|
2. |
Solubility |
Insoluble in cold water& in alcohol |
|
3. |
pH , 10 % solution ,w/v |
5 to 7 |
|
4. |
Viscosity of 3% solution in Brookfield viscometer LVDV II PRO Model Temp: 800c, Spindle No:3 , RPM : 20 |
2500 to 3500 cPs |
|
5. |
Moisture content, % w/w |
16 % |
|
6. |
Ash content,% w/w on DB |
Max 0.50% |
|
7. |
Bulk density (gm/ml) |
0.65 to 1.0 |
|
8. |
Sieve retention(100 mesh) |
Max 0.5% |
|
9. |
Starch ,% w/w on DB |
Min 95 |
|
10. |
Free Acidity, (ml of 0.1 N NaOH/100 ) |
Max 40.00 |
|
11. |
Sulphur Dioxide , ppm |
Max 80.00 |
| SIZE | Deameter of Toe (mm) |
| S | 15 |
| M | 20 |
| L | 25 |
| Mode | Programs | Power | Load | Operating Frequency |
| Soft | 99 | 150W | 300 Ω | 1Mhz |
| Force | 99 | 150W | 300 Ω | 1Mhz |
| Mode | Programs | Power | Load | Operating Frequency |
| Bi-coag | 99 | 120W | 300 Ω | 1Mhz |
| Bi-cut | 99 | 120W | 300 Ω | 1Mhz |
Specification:
| Model | 161 | 191 | 171 | 172 |
| Display | 3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
| Accuracy | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit |
| Conductivity (EC) | ||||
| Range | 0 - 200 μS 0 - 2, 0 - 20, 0 - 200 mS |
0 - 20 mS | 0 - 20 mS | 0 - 20 mS |
| Resolution | 0.1 μS | 0.01 mS (10 μS) |
0.01 mS (10 μS) |
0.01 mS (10 μS) |
| Range Selection | Manual | - | - | - |
| Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
| Cell Constant | Adjustable (0.4 - 1.5) |
Pre-Adjusted | Pre-Adjusted | Pre-Adjusted |
| Temp. Coefficient | 2% | 2% | 2% | 2% |
| Temp. Comp. | Adjustable from Table | Adjustable from Table | Adjustable from Table | Adjustable from Table |
| Reference Temp. | 25 oC | 25 oC | 25 oC | 25 oC |
Donation For Poor Old People
Price List
sample --------------------$2 usd 100 ml---------------------$40 usd 250 ml --------------------$80 usd 500 ml---------------------$160 usd 1 kg ------------------------$300 usd
Technical Specifications
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Technical Specifications:
| Insertion Width | 225 MM |
| Sheet Capacity | 10 (A 4 paper, 70 GSM) |
| Shred Bag Volume | 16 Litres |
| Cut Style | Micro-cut |
| Shred Speed | 2.1 M / Min |
| Cutting Width | 2 x 15 MM |
| Machine Dimensions | 362 x 267 x 584 MM (W x H x D) |
| Manual Reverse | Yes |
| Overload Protection | Yes |
| Automatic Start/Stop | Yes |
Specifications
|
PLATFORM SIZE (MM) |
630 x 560 |
2 MTRS. |
4 MTRS. |
|
RATED LOAD (HOIST CAPACITY) (KG.) |
230 |
460 |
460 |
|
PERMITTED LOAD (KG.) |
160 |
220 |
260 |
|
PEDAL HOIST |
1 NO. |
2 NOS. |
2 NOS. |
|
BALANCE WEIGHT SUPPLIED (CONCRETE COMPRESSED BLOCK) (KG.) |
250 |
350 |
400 |
|
WIRE ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY ROPE (7.5MM) |
100 FT. |
100 FT. |
100 FT. |
|
SAFETY LOCK WITH ANTI TILT LOCK (FOR 7.5MM) |
1 NO. |
2 NOS. |
2 NOS. |
|
SUSPENSION DEVICE |
1 NO. |
2 NOS. |
2 NOS. |
| Alloy No. | Color/Shade | Usage(K) | Application | Melting Range deg C | Remarks/comments |
| 1005 | White | 9>14K | C | 1010-965 | High reusability, Ni-Safe |
| 1401 | White | 9>14K | C | 935-890 | Ni Safe with better reusability |
| 1404 | White(14K) | 9>18K | C,H | 950-880 | For H/S & W/S; Ni Safe, high reusability & workability, high fluidity |
| 1405 | Bright White | 9>18K | C,H | 950-1000 | High Nickel but Ni Safe, High fluidity, better luster, Rhodium optional |
| 1801 | White | 18K | C | 980-1020 | Ni Safe, good reusability, low Silicon |
| 5000 | Medium White | 9>18K | C,H,R | 960-990 | For H/S & W/S; Ni Safe, high reusability & workability, low Silicon |
| 5001 | White | 9>18K | C,H | 970-1000 | For H/S & W/S; Ni Safe, good reusability and workability, High fluidity |
| 5002 | Medium White | 9>18K | C,H,R | 970-940 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
| 5003 | Medium White | 9>18K | C,H | 970-950 | For H/S & W/S; Ni Safe, high reusability and workability, High fluidity |
|
S.no. |
Parameters |
Specifications |
|
1. |
Description |
Light creamy to white color fine free flowing powder |
|
2. |
Solubility |
Insoluble in cold water& in alcohol |
|
3. |
pH , 10 % solution ,w/v |
5 to 7 |
|
4. |
Viscosity of 3% solution in Brookfield viscometer LVDV II PRO Model Temp: 800c, Spindle No:3 , RPM : 20 |
2500 to 3500 cPs |
|
5. |
Moisture content, % w/w |
16 % |
|
6. |
Ash content,% w/w on DB |
Max 0.50% |
|
7. |
Bulk density (gm/ml) |
0.65 to 1.0 |
|
8. |
Sieve retention(100 mesh) |
Max 0.5% |
|
9. |
Starch ,% w/w on DB |
Min 95 |
|
10. |
Free Acidity, (ml of 0.1 N NaOH/100 ) |
Max 40.00 |
|
11. |
Sulphur Dioxide , ppm |
Max 80.00 |
| SIZE | Deameter of Toe (mm) |
| S | 15 |
| M | 20 |
| L | 25 |
| Mode | Programs | Power | Load | Operating Frequency |
| Soft | 99 | 150W | 300 Ω | 1Mhz |
| Force | 99 | 150W | 300 Ω | 1Mhz |
| Mode | Programs | Power | Load | Operating Frequency |
| Bi-coag | 99 | 120W | 300 Ω | 1Mhz |
| Bi-cut | 99 | 120W | 300 Ω | 1Mhz |
Specification:
| Model | 161 | 191 | 171 | 172 |
| Display | 3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
3½ digit LCD |
| Accuracy | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit | 0.01, ± 1Digit |
| Conductivity (EC) | ||||
| Range | 0 - 200 μS 0 - 2, 0 - 20, 0 - 200 mS |
0 - 20 mS | 0 - 20 mS | 0 - 20 mS |
| Resolution | 0.1 μS | 0.01 mS (10 μS) |
0.01 mS (10 μS) |
0.01 mS (10 μS) |
| Range Selection | Manual | - | - | - |
| Accuracy | ± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
± 0.5% FS, ± 1 Digit |
| Cell Constant | Adjustable (0.4 - 1.5) |
Pre-Adjusted | Pre-Adjusted | Pre-Adjusted |
| Temp. Coefficient | 2% | 2% | 2% | 2% |
| Temp. Comp. | Adjustable from Table | Adjustable from Table | Adjustable from Table | Adjustable from Table |
| Reference Temp. | 25 oC | 25 oC | 25 oC | 25 oC |
