Bangalore, Karnataka, India
Our Products
| Size | Conductor Strands | Conductor Diameter | Conductor Resistance 20ºC | Insulation Thickness | Overall Diameter (Standard) | Current Limit |
| mm² | No./mm | mm | Ω/km | mm | mm | Amps |
| 0.3f | 15/0.18 | 0.8 | 48.9 | 0.5 | 1.8 | 9 |
| 0.3 | 7/0.26 | 0.8 | 50.2 | 0.5 | 1.8 | 9 |
| 0.5 | 7/0.32 | 1 | 32.7 | 0.5 | 2 | 12 |
| 0.85 | 11/0.32 | 1.2 | 20.8 | 0.5 | 2.2 | 16 |
| 1.25 | 16/0.32 | 1.5 | 14.3 | 0.5 | 2.5 | 20 |
| 2 | 26/0.32 | 1.9 | 8.81 | 0.5 | 2.9 | 27 |
| 3 | 41/0.32 | 2.4 | 5.59 | 0.6 | 3.6 | 37 |
| 5 | 65/0.32 | 3 | 3.52 | 0.7 | 4.4 | 50 |
| Type | Description | (+ve) | (-ve) | 1000C | 2000C |
| Kx | Cromel/Alumel | Nicr | NiAl | 4.10 | 8.13 |
| Jx | Iron/Constantan | Iron | Constantan | 5.26 | - |
| Tx | Copper/Constantan | Copper | Constantan | 4.24 | 9.77 |
| Vx | Compesating for type Kx | Copper | Constantan | 4.10 | - |
| Rx/Sx | Copper/Cupronic compensating for type R/S | Copper | Cupronic | 0.645 |
| Part number | Conductor size AWG | No. & dia. of strand in mm | Cross-section mm2 | Current Amp. Nominal at Ambient 30C | Outer diameter in mm | Copper index kg/km |
| RJ 0501 | ||||||
| 30101 S/N | 32 | 1/0.20 | 0.03 | 0.7 | 0.60 | 0.27 |
| 30102 S/N | 30 | 1/0.25 | 0.05 | 1.0 | 0.61 | 0.45 |
| 30103 S/N | 28 | 1/0.32 | 0.08 | 2.1 | 0.69 | 0.72 |
| 30104 S/N | 26 | 1/0.40 | 0.13 | 3.0 | 0.76 | 1.26 |
| 30105 S/N | 24 | 1/0.51 | 0.20 | 4.0 | 0.86 | 1.80 |
| 30106 S/N | 22 | 1/0.64 | 0.32 | 7.0 | 1.02 | 3.00 |
| 30107 S/N | 20 | 1/0.81 | 0.51 | 10.0 | 1.17 | 4.63 |
| 30108 S/N | 32 | 7/0.08 | 0.03 | 0.7 | 0.61 | 0.31 |
| 30109 S/N | 30 | 7/0.10 | 0.06 | 1.0 | 0.66 | 0.54 |
| 30110 S/N | 28 | 7/0.13 | 0.09 | 2.1 | 0.74 | 0.81 |
| 30111 S/N | 26 | 7/0.16 | 0.14 | 3.0 | 0.84 | 1.26 |
| 30112 S/N | 24 | 7/0.20 | 0.22 | 4.0 | 0.97 | 2.10 |
| 30113 S/N | 22 | 7/0.25 | 0.35 | 7.3 | 1.12 | 3.20 |
| 30114 S/N | 20 | 7/0.32 | 0.56 | 11.0 | 1.32 | 5.20 |
| 30115 S/N | 28 | 19/0.08 | 0.09 | 2.3 | 0.80 | 0.81 |
| 30116 S/N | 26 | 19/0.10 | 0.15 | 3.0 | 0.84 | 1.35 |
| 30117 S/N | 24 | 19/0.13 | 0.24 | 4.0 | 0.97 | 2.20 |
| 30118 S/N | 22 | 19/0.16 | 0.38 | 7.3 | 1.12 | 3.50 |
| 30119 S/N | 20 | 19/0.20 | 0.60 | 11.0 | 1.32 | 5.60 |
| UL 1015 Cables | |||||
| S.No. | AWG (Nom.Area) | Stranding | Nom. Insul. Thickness | Nominal O.D. | UL Style |
| 1 | 26 (0.128 mm²) | 7x34 (0.16mm) | 0.031”(0.76mm) | 0.818” (2.08mm) | 1015 |
| 2 | 24 (0.205 mm²) | 11x34 (0.16mm) | 0.031”(0.76mm) | 0.866” (2.20mm) | 1015 |
| 3 | 22 (0.324mm²) | 7 X 30 (0.254mm) | 0.031”(0.76mm) | 0.092” (2.33mm) | 1015 |
| 4 | 20 (0.519mm²) | 10 X 30(0.254mm) | 0.031”(0.76mm) | 0.100” (2.54mm) | 1015 |
| 5 | 18 (0.823mm²) | 16 X 30(0.254mm) | 0.031”(0.76mm) | 0.110” (2.79mm) | 1015 |
| 6 | 16 (1.31mm²) | 26 X 30(0.254mm) | 0.031”(0.76mm) | 0.122” (3.10mm) | 1015 |
| 7 | 14 (2.08mm²) | 41 X 30(0.254mm) | 0.031”(0.76mm) | 0.136” (3.45mm) | 1015 |
| 8 | 12 (3.31mm²) | 65 X 30(0.254mm) | 0.031”(0.76mm) | 0.159” (4.00mm) | 1015 |
| 9 | 11 (4.17mm²) | 82 X 30(0.254mm) | 0.031”(0.76mm) | 0.169” (4.30mm) | 1015 |
| 10 | 10 (5.26mm²) | 105 X 30(0.254mm) | 0.031”(0.76mm) | 0.183” (4.64mm) | 1015 |
| 11 | 9 (6.63 mm²) | 83x28 (0.318mm) | 0.031”(0.76mm) | 0.194” (4.94mm) | 1015 |
| 12 | 8 (8.36 mm²) | 105x28 (0.318mm) | 0.045”(1.15mm) | 0.257” (6.54mm) | 1015 |
| 13 | 7 (10.55 mm²) | 132x28 (0.318mm) | 0.045”(1.15mm) | 0.281” (7.15mm) | 1015 |
| 14 | 6 (13.30 mm²) | 167x28 (0.318mm) | 0.059”(1.52mm) | 0.336” (8.55mm) | 1015 |
| 15 | 5 (16.77 mm²) | 211x28 (0.318mm) | 0.059”(1.52mm | 0.363” (9.24mm) | 1015 |
| 16 | 4 (21.15 mm²) | 266x28 (0.318mm) | 0.059”(1.52mm) | 0.391” (9.95mm) | 1015 |
| 17 | 3 (26.67 mm²) | 335x28 (0.318mm) | 0.059”(1.52mm) | 0.427” (10.87mm) | 1015 |
| 18 | 2 (33.62 mm²) | 423x28 (0.318mm) | 0.059”(1.52mm) | 0.452” (11.50mm) | 1015 |
| 19 | 1 (42.41 mm²) | 533x28 (0.318mm) | 0.079”(2.03mm) | 0.531” (13.50mm) | 1015 |
| 20 | 0 (53.40mm²) | 672x28 (0.318mm) | 0.079”(2.03mm) | 0.578” (14.70mm) | 1015 |
| 21 | 00 (67.43 mm²) | 848x28 (0.318mm) | 0.079”(2.03mm) | 0.634” (16.12mm) | 1015 |
| 22 | 000 (85.0 mm²) | 1070x28 (0.318mm) | 0.079”(2.03mm) | 0.692” (17.60mm) | 1015 |
| 23 | 0000 (107.2 mm²) | 1349x28 (0.318mm) | 0.079”(2.03mm) | 0.759” (19.30mm) | 1015 |
| Size | Voltage Grade (kv) | ||||||
| 1.9/3.3 &3.3/3.3 | 3.8/6.6 | 6.6/6.6 &6.35/11 | 11/11 | 12.7/22 | 19/33 | 33/33 | |
| 35 | |||||||
| 50 | 0.32 | 0.26 | 0.22 | ||||
| 70 | 0.37 | 0.3 | 0.24 | 0.18 | |||
| 95 | 0.41 | 0.34 | 0.28 | 0.2 | 0.19 | 0.14 | 0.14 |
| 120 | 0.46 | 0.38 | 0.3 | 0.22 | 0.2 | 0.16 | 0.15 |
| 150 | 0.5 | 0.4 | 0.33 | 0.23 | 0.22 | 0.16 | 0.16 |
| 185 | 0.55 | 0.44 | 0.36 | 0.25 | 0.24 | 0.18 | 0.17 |
| 240 | 0.61 | 0.49 | 0.4 | 0.28 | 0.26 | 0.19 | 0.18 |
| 300 | 0.67 | 0.51 | 0.43 | 0.3 | 0.28 | 0.21 | 0.2 |
| 400 | 0.75 | 0.52 | 0.48 | 0.34 | 0.31 | 0.23 | 0.22 |
| 500 | 0.79 | 0.56 | 0.55 | 0.38 | 0.35 | 0.26 | 0.24 |
| 630 | 0.83 | 0.64 | 0.62 | 0.43 | 0.4 | 0.29 | 0.27 |
| 800 | 0.87 | 0.71 | 0.69 | 0.47 | 0.44 | 0.32 | 0.3 |
| 1000 | 0.88 | 0.75 | 0.75 | 0.51 | 0.47 | 0.34 | 0.32 |
| Size | As supplied | After Recovery(mm) | Standard Package | ||
| Inch | mm | Internal diameter(mm) | Internal diameterMax(mm) | Wall thicknessNom(mm) | Spool Lengthm/spool |
| 3/64 | 0.8 | 1.1±0.2 | 0.50 | 0.22 | 200 |
| 1/16 | 1.0 | 1.5±0.2 | 0.65 | 0.28 | 200 |
| 1.5 | 2.0±0.2 | 0.85 | 0.32 | 200 | |
| 3/32 | 2.0 | 2.5±0.2 | 1.00 | 0.35 | 200 |
| 2.5 | 3.0±0.2 | 1.30 | 0.38 | 200 | |
| 1/8 | 3.0 | 3.5±0.2 | 1.50 | 0.40 | 200 |
| 3.5 | 4.0±0.2 | 1.80 | 0.42 | 200 | |
| 4.0 | 4.5±0.2 | 2.00 | 0.45 | 200 | |
| 3/16 | 4.5 | 5.0±0.2 | 2.30 | 0.50 | 200 |
| 5.0 | 5.5±0.2 | 2.5 | 0.55 | 100 | |
| 1/4 | 6.0 | 6.5±0.2 | 3.0 | 0.55 | 100 |
| 5/16 | 7.0 | 7.5±0.3 | 3.5 | 0.55 | 100 |
| 8.0 | 8.5±0.3 | 4.0 | 0.60 | 100 | |
| 3/8 | 9.0 | 9.5±0.3 | 4.5 | 0.60 | 100 |
| 10.0 | 10.5±0.3 | 5.0 | 0.60 | 100 | |
| 11.0 | 11.5±0.3 | 5.5 | 0.60 | 100 | |
| 1/2 | 12.0 | 12.5±0.3 | 6.0 | 0.60 | 100 |
| 13.0 | 13.5±0.3 | 6.5 | 0.65 | 100 | |
| 14.0 | 14.5±0.3 | 7.0 | 0.65 | 100 | |
| 5/8 | 15.0 | 15.5±0.4 | 7.5 | 0.70 | 100 |
| 16.0 | 16.5±0.4 | 8.0 | 0.70 | 100 | |
| 17.0 | 17.5±0.4 | 8.5 | 0.70 | 100 | |
| 3/4 | 18.0 | 19.0±0.5 | 9.0 | 0.80 | 100 |
| 20.0 | 21.0±0.5 | 10.0 | 0.80 | 100 | |
| 22.0 | 23.0±0.5 | 11.0 | 0.80 | 100 | |
| 1 | 25.0 | 26.0±0.5 | 12.5 | 0.90 | 50 |
| 28.0 | 29.0±0.5 | 14.0 | 0.90 | 50 | |
| 1-1/4 | 30.0 | 31.5±1.0 | 15.0 | 0.95 | 50 |
| 35.0 | 36.5±1.0 | 17.5 | 1.00 | 50 | |
| 1-1/2 | 40.0 | 41.5±1.0 | 20.0 | 1.00 | 50 |
| 45.0 | 46.5±1.0 | 22.5 | 1.00 | 25 | |
| 2 | 50.0 | ≥50 | 25.0 | 1.00 | 25 |
| 60.0 | ≥60 | 31.0 | 1.30 | 25 | |
| 70.0 | ≥70 | 36.0 | 1.30 | 25 | |
| 3 | 80.0 | ≥80 | 41.0 | 1.46 | 25 |
| 90.0 | ≥90 | 46.0 | 1.46 | 25 | |
| 4 | 100.0 | ≥100 | 51.0 | 1.46 | 25 |
| 5 | 120.0 | ≥120 | 61.0 | 1.56 | 25 |
| 6 | 150.0 | ≥150 | 76.0 | 1.56 | 25 |
| 7 | 180.0 | ≥180 | 91.0 | 1.56 | 25 |
| Property | Test Method | Typical Performance |
| Tensile Strength(Mpa) | ASTM D2671 | 10.4MPa |
| Elongation(%) | ASTM D2671 | 200% |
| Tensile Strength after Heat aging | UL224 158℃ X168hrs | ≥7.3 |
| Elongation after aging(%) | UL224 158ºċ X168hrs | ≥100 |
| Heat shock | UL224 225ºċ X4hrs | No drippingNo cracking |
| Property | Test Method | Typical Performance |
| Dielectric Strength | IEC 243 | ≥15kv/mm |
| Volume Resistivity | IEC 93 | ≥1×1014Ω·㎝ |
| Property | Test Method | Typical Performance |
| Corrosion Action | UL224 158℃X168hrs | PASS |
| Copper Compatibility | UL224 158℃X168hrs | PASS |
| Property | Specification Requirement | Test Method | Typical Value |
| Tensile strength (Room temp.) | Min. 10.4Mpa | UL224 | 14Mpa |
| Elongation at break (Room temp.) | Min. 200% | UL224 | 400% |
| Tensile strength after aging (136℃ 168hrs) | Min. 7.3Mpa | UL224 | 9.3Mpa |
| Elongation after aging (136℃ 168hrs) | Min. 100% | UL224 | 200% |
| Voltage withstand (Un-aged) | Withstand 2.5kV for 1 minute and breakdown | UL224 | Pass |
| Voltage withstand (Aged) | Withstand at least half of un-aged breakdown voltage for 1 minute and breakdown | UL224 | Pass |
| Corrosion?of bare copper (136℃ 168hrs) | No corrosion | UL224 | No sign of deg. |
| Longitudinal shrinkage | ≤5% | UL224 | ≤3% |
| Cold bend (-30℃ 1hrs) | No cracking | UL224 | Pass |
| Flammability | UL1581 | VW-1 | |
| Volume resistivity | Min. 1010Ω·m | UL224 | Pass |
| Heat shock (180℃ 4hrs) | No cracking | UL224 | Pass |
| Dielectric strength | >19.7kV/mm | ASTM D2671 | >25kV/mm |
| Type | Size (mm) | |
| I.D. | W.T. | |
| HP-PVC | 2.00±0.15 | 0.50±0.10 |
| HP-PVC | 2.50±0.15 | 0.50±0.10 |
| HP-PVC | 3.00±0.15 | 0.50±0.10 |
| HP-PVC | 3.50±0.15 | 0.50±0.10 |
| HP-PVC | 4.00±0.15 | 0.50±0.10 |
| HP-PVC | 5.00±0.15 | 0.50±0.10 |
| HP-PVC | 6.00±0.15 | 0.50±0.10 |
| HP-PVC | 7.00±0.15 | 0.50±0.10 |
| HP-PVC | 8.00±0.15 | 0.50±0.10 |
| HP-PVC | 9.00±0.15 | 0.50±0.10 |
| HP-PVC | 10.00±0.15 | 0.50±0.10 |
| HP-PVC | 11.00±0.15 | 0.50±0.10 |
| HP-PVC | 12.00±0.15 | 0.50±0.10 |
| HP-PVC | 13.00±0.15 | 0.50±0.10 |
| HP-PVC | 14.00±0.15 | 0.50±0.10 |
| HP-PVC | 15.00±0.15 | 0.50±0.10 |
| HP-PVC | 16.00±0.15 | 0.70±0.15 |
| HP-PVC | 17.00±0.15 | 0.70±0.15 |
| HP-PVC | 18.00±0.15 | 0.75±0.15 |
| HP-PVC | 19.00±0.15 | 0.75±0.15 |
| HP-PVC | 20.00±0.15 | 0.75±0.15 |
| HP-PVC | 25.00±0.15 | 0.75±0.15 |
| HP-PVC | 30.00±0.15 | 1.00±0.15 |
| HP-PVC | 35.00±0.15 | 1.00±0.15 |
| HP-PVC | 40.00±0.15 | 1.00±0.15 |
| HP-PVC | 45.00±0.15 | 1.00±0.15 |
| HP-PVC | 50.00±0.15 | 1.00±0.15 |
| HP-PVC | 55.00±0.15 | 1.00±0.15 |
| HP-PVC | 60.00±0.15 | 1.00±0.15 |
| HP-PVC | 65.00±0.15 | 1.00±0.15 |
| HP-PVC | 70.00±0.15 | 1.00±0.15 |
| HP-PVC | 75.00±0.15 | 1.00±0.15 |
| Property | Test Methods | Typical Data |
| Shrink Temperature | Company standard | 135℃ |
| Operating temperature Range | UL224 | -70℃-200℃ |
| Axial Shrinkage rate | ASTM D2671 | ±15% Maximum |
| Secant Factor | ASTM D2671 | 750Mpa Maximum |
| Tensile Strength | ASTM D638 | ≥19MPa |
| Elongation at break | ASTM D638 | ≥200% |
| Anti-aging at high temperature | ASTM D2671(300℃，168h) | No Crack, No flow |
| Adaptability at low temperature | ASTM D2671 | Minus 65, no crack |
| Dielectric Strength | VDE 0303 Part2 | 26KV/mm |
| Volume Resistance | ASTM D2671 | ≥1.0*1019 Ω.cm |
| Chemical Reistance | ASTM D2671 | No Corrosion |
| Corrosion Resistance | ASTM D2671 | Great |
| Concentricity | ASTM D2671 | ≥65% |
| Size | As Supplied(mm) | After Recovery(mm) | Packing | ||
| Diameter | Wall-Thickness | Diameter | Wall-Thickness | M / Roll | |
| Φ0.8 | 0.8 | 0.50±0.1 | 0.5 | OJ0±0.1 | 200 |
| Φ1.0 | 1.0 | 0.50±0.1 | 0.6 | 0.70±0.1 | 200 |
| Φ1.5 | 1.5 | 0.50z-0.1 | 0.8 | 0.70±0.1 | 200 |
| Φ2.0 | 2.0 | 0.50±0.1 | 1. 2 | OJ0±0.1 | 200 |
| Φ2.5 | 2.5 | 0.50±0.1 | 1.5 | 0.70±0.1 | 200 |
| Φ3.0 | 3.0 | 0.50z0.1 | 1.8 | 0.70±0.1 | 200 |
| Φ3.5 | 3.5 | 0.50z-0.1 | 2.1 | 0.70±0.1 | 200 |
| Φ40 | 4.0 | 0.50±0.1 | 2.5 | 0.70±0.1 | 200 |
| Φ4.5 | 4.5 | 0.50z-0.1 | 2.8 | 0.70±0.1 | 200 |
| Φ5.0 | 5.0 | 0.50±0.1 | 3.0 | 0.70z0.1 | 200 |
| Φ6.0 | 6.0 | 0 50±0.1 | 3.5 | 0.70±01 | 200 |
| Φ6 5 | 6.5 | 0.50±0.1 | 3.8 | 0.70:t0.1 | 100 |
| Φ7.0 | 70 | 0.50±0.1 | 4.2 | 0.70±0.1 | 100 |
| Φ8.0 | 8.0 | 0 50±0.1 | 4.7 | 0 70±01 | 100 |
| Φ90 | 9.0 | 0 50±0 1 | 5.3 | 0.70±0 1 | 100 |
| Φ10 | 10.0 | 100±0.1 | 6.0 | 0.70±0.1 | 50 |
| Φ11 | 11.0 | 100±0.1 | 6.5 | 1.70±0.1 | 50 |
| Φ12 | 12.0 | 100±0.1 | 7.0 | 1.70±01 | 50 |
| Φ15 | 15.0 | 100±0.1 | 9.0 | 170±0.1 | 50 |
| Φ16 | 16.0 | 1.00±0.1 | 9.5 | 1.70±0.1 | 35 |
| Φ18 | 18 | 1.00±t0.1 | 10.5 | 1.70±0.1 | 35 |
| Φ20 | 20 | l.OO±t0.1 | 13.0 | 1.70±0.1 | 35 |
| Φ25 | 25 | l.OO±0.1 | 16.0 | 1.70±0.1 | 20 |
| Φ30 | 30 | 1OO±t0.1 | 20.0 | 1.70±0.1 | 20 |
| Φ35 | 35 | 1.00±0.1 | 22.0 | 1.70±0.1 | 20 |
| Φ40 | 40 | 1.00±0.1 | 26.0 | 1.70±0.1 | 20 |
| Φ50 | 50 | 1.00±0.1 | 32.0 | 1.70±0.1 | 20 |
| SIZE | AS SUPPLIED (MM) | AFTER RECOVERY (MM) | ||
| AWG | mm | INTERANAL DIAMETER | INTERANAL DIAMETER | WALL THICKNESS |
| 30 | 0.86 | ≥0.86 | ≤0.38 | 0.25±0.04 |
| 28 | 0.97 | ≥0.97 | ≤0.46 | 0.25±0.04 |
| 26 | 1.17 | ≥1.17 | ≤0.56 | 0.25±0.04 |
| 24 | 1.27 | ≥1.27 | ≤0.64 | 0.25±0.04 |
| 22 | 1.55 | ≥1.55 | ≤0.80 | 0.25±0.04 |
| 20 | 1.95 | ≥1.95 | ≤0.97 | 0.30±0.05 |
| 18 | 2.35 | ≥2.35 | ≤1.17 | 0.30±0.05 |
| 16 | 2.95 | ≥2.95 | ≤1.45 | 0.30±0.05 |
| 14 | 3.65 | ≥3.65 | ≤1.82 | 0.30±0.05 |
| 12 | 4.55 | ≥4.55 | ≤2.26 | 0.30±0.05 |
| 10 | 5.65 | ≥5.65 | ≤2.80 | 0.30±0.05 |
| 8 | 7.05 | ≥7.05 | ≤3.55 | 0.40±0.06 |
| 6 | 8.75 | ≥8.75 | ≤4.40 | 0.40±0.06 |
| 4 | 10.95 | ≥10.95 | ≤5.45 | 0.40±0.06 |
| 2 | 13.75 | ≥13.75 | ≤6.90 | 0.40±0.06 |
| 0 | 17.15 | ≥17.15 | ≤8.56 | 0.40±0.06 |
| Property | Specification Requirement | Test Method | Typical Value |
| Tensile strength (Room temp.) | Min. 17.3Mpa | UL224 | >35Mpa |
| Elongation at break (Room temp.) | Min. 150% | UL224 | 300% |
| Voltage withstand (Un-aged) | Withstand 2.5kV for 1 minute and breakdown | UL224 | Pass |
| Longitudinal shrinkage | ≤10% | UL224 | ≤5% |
| Low-temperature flexibility (-55℃ 4hrs) | No cracking | UL224 | Pass |
| Flammability | VW-1 | UL1581 | Pass |
| Volume resistivity | Min. 1011Ω·m | UL224 | Pass |
| Heat shock (275℃ 4hrs) | No cracking | ASTM D2671 | Pass |
| Corrosion | No corrosion | UL224 | Pass |
| Size | As Supplied(mm) | After Recovered (mm) | Standard package(m/roll) | ||
| inch | mm | Inner Diameter(Min.) | Inner Diameter (Max.) | Wall Thickness | |
| 3/64 | Φ1.2 | 1.2 | 0.6 | 0.25±0.05 | 1.22/300 |
| 1/16 | Φ1.6 | 1.6 | 0.8 | 0.25±0.05 | 1.22/300 |
| 3/32 | Φ2.4 | 2.4 | 1.2 | 0.25±0.05 | 1.22/200 |
| 1/8 | Φ3.2 | 3.2 | 1.6 | 0.25±0.05 | 1.22/200 |
| 3/16 | Φ4.8 | 4.8 | 2.4 | 0.25±0.05 | 1.22/200 |
| 1/4 | Φ6.4 | 6.4 | 3.2 | 0.30±0.08 | 1.22/200 |
| 3/8 | Φ9.5 | 9.5 | 4.8 | 0.30±0.08 | 1.22/200 |
| 1/2 | Φ12.7 | 12.7 | 6.4 | 0.30±0.08 | 1.22/200 |
| 3/4 | Φ19.1 | 19.1 | 9.5 | 0.43±0.08 | 1.22/50 |
| 1 | Φ25.4 | 25.4 | 12.7 | 0.48±0.08 | 1.22/50 |
| 11/2 | Φ38.1 | 38.1 | 19.1 | 0.51±0.08 | 1.22/50 |
| 2 | Φ50.8 | 50.8 | 25.4 | 0.58±0.08 | 1.22/50 |
| Item | Performance | Note | |
| Dielectric breakdown Voltage KV AC |
Minimum average | ≥1.2 | Before aged |
| Thermal endurance | No Indication of crack | OK | 6 HRS* 245±5ºC 245±5ºC 6HRS AGING |
| Fire resistance | VW-1 | OK | UL 1441 |
| Sr. No. | BUSBAR SIZE | SUITABLE SIZE OF SLEEVE ( Width ) |
| 1. | 8 x 4 , 6 x 6, 10 x 3 | 17 mm |
| 2. | 12 x3, 9 x 6 | 20 mm |
| 3. | 15 x 3, 12 x 6 | 25 mm |
| 4. | 20 x 3, 18 x 6, 16 x 3 | 30 mm |
| 5. | 25 x 3, 20 x 6 | 35 mm |
| 6. | 26 x 6, 25 x 9 | 41 mm |
| 7. | 30 x 10, 30 x 6, 25 x 12 | 48 mm |
| 8. | 38 x 6, 30 x 12 | 55 mm |
| 9. | 40 x 10, 40 x 6, 38 x 12, 38 x 9 | 61 mm |
| 10. | 50 x 6 | 73 mm |
| 11. | 50 x 12, 50 x 10 | 81 mm |
| 12. | 60 x 6 | 85 mm |
| 13. | 75 x 6 | 93 mm |
| 14. | 75 x 12 | 103 mm |
| 15. | 90 x 12, 90 x 6 | 110 mm |
| 16. | 100 x 9, 100 x 6 | 128 mm |
| 17. | 100 x 12 | 140 mm |
| 18. | 125 x 10, 125 x 6 | 170 mm |
| 19. | 150 x 12, 150 x 10, 150 x 6 | 190 mm |
| 20. | 175 x 12, 175 x 10, 150 x 6 | 210 mm |
| 21. | 200 x 12 | 230 mm |
| S.No. | Item: Cable LFH 600V Single Core | Unit | 24AWG | 22AWG | 20AWG | 18AWG | 16AWG | 14AWG | 12AWG |
| 1 | Make | RJ INDUSTRIAL CORPORATION | |||||||
| 2 | Type | SINGLE CORE UNSHIELDED | |||||||
| 3 | No. of Cores | 1 core | |||||||
| 4 | Reference Standards | --- | JSS51022 | ||||||
| 5 | Temp.range | Degc | (-)50 to +120 | ||||||
| 6 | Conductor | (-)50 to +120 | |||||||
| Strand diameter | mm | 0.13 | 0.16 | 0.2 | 0.25 | 0.29 | 0.25 | 0.32 | |
| No. of Strands | nos | 19 | 19 | 19 | 19 | 19 | 37 | 37 | |
| Cond.dia max. | mm | 0.62 | 0.80 | 1.04 | 1.29 | 1.53 | 1.82 | 2.35 | |
| 7 | Insulation | Extruded | |||||||
| Material | --- | LFH | |||||||
| Core dia (approx.) | mm | 1.05 TO 1.35 | 1.3 TO 1.55 | 1.55 TO 1.80 | 1.8 TO 2.1 | 2.15 TO 2.35 | 2.75 TO 3.1 | ||
| Colour | As desired | ||||||||
| 8 | Electrical Test | ||||||||
| High Voltage at room temp. | KVAC | 2.5 | |||||||
| Spark test | KVAC | 5.0 | |||||||
| Conductor resistance, Ω/Km (At 200C) | 95.6 | 60.0 | 33.2 | 21.1 | 14.5 | 10.9 | 6.63 | ||
| "Insulation resistance, M ohm-Km min At 20±20C" | 0.2 | ||||||||
| 9 | Tests on isulation | ||||||||
| Critical Oxygen Index Test | % | 29 (min) | |||||||
| Smoke Index Test | % | 12 (Max) | |||||||
| Toxicity Index Test | - | 0.2/100gm (max) | |||||||
| Temperature Index Test ,0C | 0C | 250 (min) | |||||||
| Hydrochloric Acid Gas Contents (As per IEC 754-II) | - | NIL (pH-4.3 min. &Conductibity-10µS/mm (max.) | |||||||
| 10 | Packing | Meter | 100m and above with max 20% of PO qty in 20 to 99m in plastic spools. | ||||||
