Ugam Chemicals

Parvati, Pune, Maharashtra

Only under the strict supervision and management of our team members, we make certain that the products are packed as per the set standards; by this we are capable of delivering the range safely. In order to ensure efficient handling of the payment procedure, we have developed our own model that helps us a lot in making safe and secure transactions.

Trade Information

• Product Code -  H R For Furnace
• Brand Name - UGAM
• Minimum Order Quantity - 10
• Unit of Measure - Liter/Liters
• Main Domestic Market - All India

Features :

• UGAM Thermal insulation coating is the only product which takes the care of radiation.
• It is tested by I. I. T. Mumbai. And National Coatings Corporation California, U. S. A.
• This product is used to the surface of furnace where the temperature is less than 550 degrees C.
• This blocks radiation losses by repelling it interior and helps even heating throughout furnance.This in turn provides saving up to 10 %.
• This is used for reduction in energy consumption of furnaces due to heat losses.
• This product is also suitable for brick hangers in furnace ceiling, furnace doors, any metal area behind bricks which can be exposed to excessive heat in case of bricks being damaged or leaked through.
• In industries where heat is used for process, UGAM Thermal insulation coating are used for energy saving purpose up to 1800 degrees C.
• The technical specification is correct to the best of our knowledge and under test conditions and we do not accept any liability towards misuse and contents of it. Product must be tested for specific use prior to use.

Additional Information:

• Item Code: UGAMHEATRESISTANTFORFURNACEINTERIORS

We are counted amid the quality-centric organizations and thus source the inputs only from the trustworthy sources. Also, these raw materials are checked against varied quality parameters. Each product in our range is made using reliable materials procured from leading vendors. Thus, our products are trustworthy.

Minimum Order QuantityDescription:Thermal Insulation Coatings is Elastomeric Thermal Insulation and Water proof coating. After curing it forms heat barrier, flexible, and strong film which bridges cracks, prevents peeling, future cracks, growth of algae or fungi. It prevents water seepage and is UV resistant.Thermal Insulation Coatings is tested at VJTI Mumbai, National Coating Corporation California, and other laboratories in U. S. we strictly follow A S T M standards and our products are guaranteed against manufacturing defects.

Applications:Walls, Ceilings, A/c ducts, Roofs, Metal Buildings, Homes, Mobile homes, Industrial and Commercial facilities, Special application in defense, cold storage, automobiles, ovens up to 160 degrees Celsius and many more. Proper surface preparation, application of sealants at major cracks and proper primers or base coat should be applied prior to application of Thermal Insulation Coatings.

Specialty:Reduction of electricity cost by upto 40%. Thermal Insulation Coatings helps to block transfer of heat inward when applied to exterior of walls and outward when applied to interior of walls. For maximum electricity savings in air conditioned buildings, we recommend doing both!

Features:

• The heating in sunlight is mainly due to radiation. Conduction and convection are secondary which transfer such generated heat.
• Conventional insulating products are designed to prevent conduction and convection.
• Thermal Insulation Coatings is the only product which takes the care of radiation.
• The paint contains Imported Ceramic Microspheres which are used by N A S A for making tiles to cover space shuttles for thermal insulation and which are hollow and having vacuum inside.
• These microspheres reduce the heat generation due to radiation considerably and also help reducing conduction and convection.
• Being ceramic, they are inert and do not take part in any reaction with paint.
• These microspheres are dispersed in water base acrylic latex paint to achieve the weather resistance, U V Resistance, total waterproofing effect and getting the elastomeric effect.
• Being elastomeric it takes the care of expansion and contraction of the surface on which it is applied. Also after application of this, any conventional waterproofing is not required to the building.
• Since it is always visible on the top, any damage to it due to drilling, hammering or chipping can be repaired there only.
• Acrylic latex and special type of additives makes the coating very hard to take the wear and tear of the terraces easily.
• It is mainly suggested for Roofs, Walls, Freezer vans, or any surface needing heat insulation.
• On a bare concrete terrace, it’s application has shown the difference of 20 deg. Celsius checked with infrared thermometer at 2.30pm.
• If applied externally to the buildings having central air conditioning the energy costs are reduced by minimum of 15% per month.
• In some cases where the application is done both interior and exterior, 40% saving is achieved. Hence ideal saving can be achieved just by applying Thermal Insulation Coatings paint.
• In cases where heavily leaking roofs were coated with Thermal Insulation Coatings and the roofs now show no sign of any leaks.
• Also since it can be manufactured in any shade, it is ideal for exterior surfaces as well as smoother version is available for interior use as finish coat.
• Hence Thermal Insulation Coatings is one coating, which works as exterior/interior paint, U V Resistant coating, waterproofing and most importantly thermal insulation coating and eliminates conventional waterproofing, and thermal insulation of the building.

Product Details:

• Minimum Order Quantity - 10 Litre
• Brand - Ugam
• Color - Any
• Packaging Size - 10 L
• Packaging Type - Tin

With the assistance of our excellent logistics facility, we are able to deliver the orders within the postulated time frame. Our organization is one of the steadfast providers of the finest range of our product in Pune(India).

Product Details

• Minimum Order Quantity - 10 Litres
• Brand - Ugam
• Color - Brown
• Packaging Size - 10 L
• Packaging Type - Tin

Excellent Product for Energy Saving Coating Upto 1200 Deg C Solvent Base

Features

• UGAM Thermal Insulation Coatings is the only product which takes the care of radiation.
• It is tested by I. I. T. Mumbai. And National Coatings Corporation California, U. S. A.
• This product is used to the surface of boiler where the temperature is more than 600 degrees C and less than 1100 degrees C.
• This is suitable product for application on metal surfaces. For application over bricks, our water base product should be used.
• This is used for reduction in energy consumption of furnaces due to heat losses.
• This product is also suitable for brick hangers in furnace ceiling, furnace doors, any metal area behind bricks which can be exposed to excessive heat in case of bricks being damaged or leaked through.
• In industries where heat is used for process, UGAM Thermal Insulation Coatings are used for energy saving purpose up to 1800 degrees C.

Application

• Ugam H R T I 1200 Coating is specially manufactured for coating of parts of furnaces which come into contact of heat upto 1200 deg. Celsius.
• This coating increases the life of parts of furnace or the parts on which they are applied for protection by providing thermal insulation to them by radiation control.
• The application procedure of UGAM H R T I 1200 is very easy.
• It can be applied by brush after mixing it well and thinned down to application viscosity if required.
• It does not need any primer.
• The previously applied coating should be removed from the surface by UGAM PAINT STRIPPER. The paint stripper should be applied to the surface and left for few minutes till the paint starts lifting fromthe surface.
• Then the surface should be scraped lightly with the help of emery paper. The surface should then be cleaned by thinner followed by application of one coat of UGAM H R T I 1200.
• The surface should be air-dried for one hour and then should be heated and maintained to 250 deg Celsius for one hour.
• If it is not possible to heat and maintain the surface to that temperature for the specified period, the painted surface should be taken in use, without touching it and it will automatically dry in warm
• conditions within 3 to 4 days, depending upon the amount of heat it receives.
• Then the second coat in such condition should be applied after complete drying of the first coat.
• Similarly third coat should be applied for getting good results of thermal insulation.

The technical specification is correct to the best of our knowledge and under test conditions and we do not accept any liability towards misuse and contents of it. Product must be tested for specific use prior to use.

Additional Information:

• Item Code: UGAMHRTI1200SB

Based in Pune(India), we have gained wide appreciation owing to our high quality products and client-centric approach. We are capable of entertaining the urgent and bulk requirements of the customers owing to the dependable logistics facilities.

Trade Information

• Product Code - H R TI 1200 SB
• Brand Name -  UGAM
• Minimum Order Quantity - 10
• Unit of Measure - Liter/Liters

Excellent Product for Energy Saving Coating Upto 1200 Deg C Solvent Base

Features

• UGAM Thermal Insulation Coatings is the only product which takes the care of radiation.
• It is tested by I. I. T. Mumbai. And National Coatings Corporation California, U. S. A.
• This product is used to the surface of boiler where the temperature is more than 600 degrees C and less than 1100 degrees C.
• This is suitable product for application on metal surfaces. For application over bricks, our water base product should be used.
• This is used for reduction in energy consumption of furnaces due to heat losses.
• This product is also suitable for brick hangers in furnace ceiling, furnace doors, any metal area behind bricks which can be exposed to excessive heat in case of bricks being damaged or leaked through.
• In industries where heat is used for process, UGAM Thermal Insulation Coatings are used for energy saving purpose up to 1800 degrees C.

Application

• Ugam H R T I 1200 Coating is specially manufactured for coating of parts of furnaces which come into contact of heat upto 1200 deg. Celsius.
• This coating increases the life of parts of furnace or the parts on which they are applied for protection by providing thermal insulation to them by radiation control.
• The application procedure of UGAM H R T I 1200 is very easy.
• It can be applied by brush after mixing it well and thinned down to application viscosity if required.
• It does not need any primer.
• The previously applied coating should be removed from the surface by UGAM PAINT STRIPPER. The paint stripper should be applied to the surface and left for few minutes till the paint starts lifting fromthe surface.
• Then the surface should be scraped lightly with the help of emery paper. The surface should then be cleaned by thinner followed by application of one coat of UGAM H R T I 1200.
• The surface should be air-dried for one hour and then should be heated and maintained to 250 deg Celsius for one hour.
• If it is not possible to heat and maintain the surface to that temperature for the specified period, the painted surface should be taken in use, without touching it and it will automatically dry in warm
• Conditions within 3 to 4 days, depending upon the amount of heat it receives.
• Then the second coat in such condition should be applied after complete drying of the first coat.
• Similarly third coat should be applied for getting good results of thermal insulation.

The technical specification is correct to the best of our knowledge and under test conditions and we do not accept any liability towards misuse and contents of it. Product must be tested for specific use prior to use.

Additional Information:

• Item Code: UGAMHRTI1200SB

We are capable of delivering the orders in a safe manner at customer's end and for this; we have a capacious warehouse that is installed with all required amenities required for safe storage. The company is deeply rooted in Pune(India) and is acknowledged for its fair pricing policy and professional attitude.

Trade Information

• Product Code -  Insulmix HR
• Brand Name - UGAM
• Minimum Order Quantity - 10
• Unit of Measure - Liter/Liters
• Main Domestic Market - All India
• Packaging Type - Bucket
• Packaging Size - 20 L

UGAM INSULMIX HR Thermal Insulation Coatings (Energy saving coatings)

Description

• Ugam Insulmix HR is Elastomeric Thermal Insulation and Water proof coating. After curing it forms heat barrier, flexible, and strong film which bridges cracks, prevents peeling, future cracks, growth of algae or fungi. It prevents water seepage and is U. V. resistant.
• Ugam Insulmix HR is tested at V. J. T. I. Mumbai, National Coating Corporation Callifornia, and other laboratories in U. S. we strictly follow A S T M standards and our products are guaranteed against manufacturing defects.

Applications

• Ugam Insulmix HR is designed for use on almost all surfaces. Exterior R.C.C. surface, Cement surfaces, Asbestos sheets, G.I. sheets, Galvalum sheets, Stone walls, Sloping roofs, wood, plastic, for ovens and furnaces, freezer vans, mobile houses, Industrial and Commercial facilities, Special application in defense, cold storage, automobiles, and places requiring thermal insulation and waterproofing.
• We have completed many Waterproof and thermal insulation Coating projects in Pune and Mumbai.

Speciality

• Reduction of electricity cost by upto 40%. Ugam Insulmix HR helps to block transfer of heat inward when applied to exterior of walls and outward when applied to interior of walls. For maximum electricity savings in air conditioned buildings, we recommend doing both!
• Hence Ugam Insulmix HR is one coating, which works as exterior/interior paint, U V Resistant coating, waterproofing and most importantly thermal insulation coating and eliminates conventional waterproofing, and thermal insulation of the building.

Advantages

• Gives thermal insulation to surface over which it is applied.
• Posses elastomeric effect which bridges existing gaps up to 0.5mm and prevents further cracking.
• Controls thermal expansion and contraction of the surface and prevents surface movements thereby reducing the possibilities of development of cracks.
• If applied to building having central A/c., electricity bills can be reduced up to 40%.
• Being water proof, stops all minor leakages to terraces and walls permanently.
• Has excellent alkali resistance and U V resistance.
• Can be supplied in any shade on order

The technical specification is correct to the best of our knowledge and under test conditions and we do not accept any liability towards misuse and contents of it. Product must be tested for specific use prior to use.
For further details or any queries please do not hesitate to contact us.

Additional Information:

• Item Code: UGAMINSULMIXHRTHERMALINSULATIONCOATING

Payment for orders can be done by offline or online modes, according to suitability of clients. We will make sure any method agreed on by you and the company will be safe and secure. We are associated with a team of quality analysts who hold years of experience in this domain and conduct strict quality checks for ensure high quality of raw material as well as finished products.

Trade Information

• Product Code -   H R T I 600
• Brand Name - UGAM
• Minimum Order Quantity - 10
• Unit of Measure - Liter/Liters
• Main Domestic Market - All India

Excellent Product for Energy Saving Coating Upto 600 Deg C

 Features

• For achieving heat resistant with thermal insulation of surfaces up to 550 Deg C Ugam H.R.T.I 600 is used.
• This is mainly used for rubber moulds, presses, plastic moulds and presses to achieve energy saving through blocking heat losses from moulds.
• The heating in sunlight is mainly due to radiation. Conduction and convection are secondary which transfer such generated heat.
• Conventional insulating products are designed to prevent conduction and convection.
• UGAM THERMAL INSULATION COATING is the only product which takes the care of radiation.
• Being elastomeric it takes the care of expansion and contraction of the surface on which it is applied. Also after application of this, any conventional waterproofing is not required to the building.
• Since it is always visible on the top, any damage to it due to drilling, hammering or chipping can be repaired there only.
• UGAM HRTI 600 is mainly suggested for Chimneys, Furnace, Boilers, Freezer vans, ovens up to 400 degrees C or any surface needing heat insulation.
• On a bare furnace exterior surface, it’s application has shown the minimum reduction of 10% in temperature. (Deg Celsius) checked with infrared thermometer.
• It is tested by I. I. T. Mumbai. And National Coatings Corporation California, U. S. A.
• If undisturbed it does not need reapplication for about five years.
• In some cases where the application is done both interior and exterior, 40% saving is achieved. Hence ideal saving can be achieved just by applying UGAM THERMAL INSULATION COATING paint.
• In industries where heat is used for process, UGAM THERMAL INSULATION COATINGS are used for energy saving purpose up to 1800 degrees C.
• It reduces heat transfer from inner shell to exterior and hence reduces fuel consumption thereby increasing energy saving.

Application

• Ugam Heat Resist 600 Coating is specially manufactured for coating of parts which come into contact of heat upto 600 deg.Celsius.
• This coating increases the life of parts on which they are applied for protection.
• The application procedure of UGAM HEAT RESIST 600 is very easy.
• It can be applied by brush after mixing it well and thinned down to application viscosity if required.
• The previously applied coating should be removed from the surface by UGAM PAINT STRIPPER.
• The paint stripper should be applied to the surface and left for few minutes till the paint starts lifting from the surface.
• Then the surface should be scraped lightly with the help of emery paper.
• The surface should then be cleaned by thinner followed by application of first coat of UGAM H R T I 600 by brush.
• Cure it at 250 degrees C for one hour and bring back to room temp. Apply second coat of UGAM H R T I 600 in similar way as above.
• Again cure at 250 deg C for one hour. Apply third coat of primer as above and cure as above.
• Then apply third coat of UGAM H R T I 600. The surface should be air-dried for one hour. It should be heated up to 250 degrees Celsius and maintained at that temp for one hour before bringing to room temperature.
• This will provide average 250 microns thickness to the surface.
• The technical specification is correct to the best of our knowledge and under test conditions and we do not accept any liability towards misuse and contents of it. Product must be tested for specific use prior to use.

Additional Information:

• Item Code: UGAMHRTI600

We are a notable name in the domain offering the best in class and quality Insulmix Thermal Insulation Coatings. Our team experts are capable of maintaining database containing complete transactions made by our customers and thus, you can trust us for the online or offline payments made.

Trade Information

• Product Code -  Insulmix
• Brand Name -  UGAM
• Minimum Order Quantity - 10
• Unit of Measure - Liter/Liters
• Packaging Type - Tin
• Color - Any

UGAM Thermal Insulation Coatings(Energy Saving Coatings)

DescriptionUgam Insulmix is Elastomeric Thermal Insulation and Water proof coating. After curing it forms heat barrier, flexible, and strong film which bridges cracks, prevents peeling, future cracks, growth of algae or fungi. It prevents water seepage and is U. V. resistant.UGAM INSULMIX is tested at V. J. T. I. Mumbai, National Coating Corporation Callifornia, and other laboratories in U. S. we strictly follow A S T M standards and our products are guaranteed against manufacturing defects.

Applications

• Ugam Insulmix is designed for use on almost all surfaces. Exterior R.C.C. surface, Cement surfaces, Asbestos sheets, G.I. sheets, Galvalum sheets, Stone walls, Sloping roofs, wood, plastic, for ovens and furnaces, freezer vans, mobile houses, Industrial andCommercial facilities, Special application in defense, cold storage, automobiles, and places requiring thermal insulation and waterproofing.
• We have completed many Waterproof and thermal insulation Coating projects in Pune and Mumbai.

SPECIALITYReduction of electricity cost by upto 40%. Ugam insulmix helps to block transfer of heat inward when applied to exterior of walls and outward when applied to interior of walls. For maximum electricity savings in air conditioned buildings, we recommend doing both!

Features:

• The heating in sunlight is mainly due to radiation. Conduction and convection are secondary which transfer such generated heat.
• Conventional insulating products are designed to prevent conduction and convection.
• Ugam Insulmix is the only product which takes the care of radiation.
• The paint contains Imported Ceramic Microspheres which are used by N A S A for making tiles to cover space shuttles for thermal insulation and which are hollow and having vacuum inside.
• These microspheres reduce the heat generation due to radiation considerably and also help reducing conduction and convection.
• Being ceramic, they are inert and do not take part in any reaction with paint.
• These microspheres are dispersed in water base acrylic latex paint to achieve the weather resistance, U V Resistance, total waterproofing effect and getting the elastomeric effect.
• Being elastomeric it takes the care of expansion and contraction of the surface on which it is applied. Also after application of this, any conventional waterproofing is not required to the building.
• Since it is always visible on the top, any damage to it due to drilling, hammering or chipping can be repaired there only.
• Acrylic latex and special type of additives makes the coating very hard to take the wear and tear of the terraces easily.
• It is mainly suggested for Roofs, Walls, Freezer vans, or any surface needing heat insulation.
• On a bare concrete terrace, it’s application has shown the difference of 20 deg. Celsius checked with infrared thermometer at 2.30pm.
• If applied externally to the buildings having central air conditioning the energy costs are reduced by minimum of 15% per month.
• In some cases where the application is done both interior and exterior, 40% saving is achieved. Hence ideal saving can be achieved just by applying Ugam Insulmix paint.
• In cases where heavily leaking roofs were coated with UGAM INSULMIX and the roofs now show no sign of any leaks.
• Also since it can be manufactured in any shade, it is ideal for exterior surfaces as well as smoother version is available for interior use as finish coat.
• Hence UGAM INSULMIX is one coating, which works as exterior/interior paint, U V Resistant coating, waterproofing and most importantly thermal insulation coating and eliminates conventional waterproofing, and thermal insulation of the building.

Additional Information:

• Item Code: UGAMINSULMIX

We, being a customer centric organization, make sure that the transactions are carried out by the professionals so as to avoid any kind of confusion. We sternly maintain payment records for the satisfaction of our clients. We have a dedicated staff that ensures the quality of material used for designing and production. The inspection is done on the initial stages to make the final product free from defect.

Trade Information

• Product Code - Insulmix EP
• Brand Name - UGAM
• Minimum Order Quantity - 10
• Unit of Measure - Liter/Liters
• Main Domestic Market - All India
• Packaging Type - Tin

UGAM Thermal Insulation Coatings(Energy saving coatings)

Description :

• Ugam Insulmix EP is Elastomeric Thermal Insulation and Water proof coating. After curing it forms heat barrier, flexible, and strong film which bridges cracks, prevents peeling, future cracks, growth of algae or fungi. It prevents water seepage and is U. V. resistant.
• Ugam Insulmix EP is tested at V. J. T. I. Mumbai, National Coating Corporation Callifornia, and other laboratories in U. S. we strictly follow A S T M standards and our products are guaranteed against manufacturing defects.

Applications :

• Walls, Ceilings, A/c ducts, Roofs, Metal Buildings, Homes, Mobile homes, Industrial and Commercial facilities, Special application in defense, cold storage, automobiles, ovens up to 160 degrees Celsius and many more. Proper surface preparation, application of sealants at major cracks and proper primers or base coat should be applied prior to application of Ugam Insulmix EP.
• We have completed many Waterproof and thermal insulation Coating projects in Pune and Mumbai.

Special Precaution :

• Since it is Solvent base product, the only precaution to be taken while applying on metal surface is to use UGAM METAL EP PRIMER FOR INSULMIX prior to the application of Ugam Insulmix EP.
• It will avoid any rusting of metal surface due to weather.

Speciality :Reduction of electricity cost by upto 40%. Ugam Insulmix EPhelps to block transfer of heat inward when applied to exterior of walls and outward when applied to interior of walls. For maximum electricity savings in air conditioned buildings, we recommend doing both!

Advantages :

• Gives thermal insulation to surface over which it is applied.
• Posses elastomeric effect which bridges existing gaps up to 0.5mm and prevents further cracking.
• Controls thermal expansion and contraction of the surface and prevents surface movements thereby reducing the possibilities of development of cracks.
• If applied to building having central A/c., electricity bills can be reduced up to 40%.
• Being water proof, stops all minor leakages to terraces and walls permanently.
• Has excellent alkali resistance and U V resistance.
• Can be supplied in any shade on order
• The technical specification is correct to the best of our knowledge and under test conditions and we do not accept any liability towards misuse and contents of it. Product must be tested for specific use prior to use.

Additional Information:

• Item Code: UGAMINSULMIXEP

Buyers can place bulk or retail orders with us all year round and expect on time delivery of consignments. With the aid of our well-established network and cordial associations, we are able to cater to the wide requirements of the buyers based in Pune(India).

Trade Information

• Product Code -  HRTI 400
• Brand Name - UGAM
• Minimum Order Quantity - 10
• Unit of Measure - Liter/Liters
• Main Domestic Market - All India

Excellent Product for Energy Saving Upto 400 Deg C

Features

• For achieving heat resistant with thermal insulation of surfaces up to 350 Deg C Ugam P.U.S.I Composite H.R.T.I 400 is used.
• This is mainly used for rubber moulds, presses, plastic moulds and presses to achieve energy saving through blocking heat losses from moulds.
• The heating in sunlight is mainly due to radiation. Conduction and convection are secondary which transfer such generated heat.
• Conventional insulating products are designed to prevent conduction and convection.
• UGAM Thermal Insulation Coatings is the only product which takes the care of radiation.
• The paint contains Imported Ceramic Microspheres which are used by N A S A for making tiles to cover space shuttles for thermal insulation and which are hollow and having vacuum inside.
• These microspheres reduce the heat generation due to radiation considerably and also help reducing conduction and convection.
• Being ceramic, they are inert and do not take part in any reaction with paint.
• These microspheres are dispersed in Epoxy latex paint to achieve the weather resistance, total waterproofing effect and getting the elastomeric effect.
• Being elastomeric it takes the care of expansion and contraction of the surface on which it is applied. Also after application of this, any conventional waterproofing is not required to the building.
• Since it is always visible on the top, any damage to it due to drilling, hammering or chipping can be repaired there only.
• Epoxy latex and special type of additives makes the coating very hard to take the wear and tear of the terraces easily.
• UGAM HRTI 400 is mainly suggested for Furnace, Boilers, Freezer vans, ovens up to 400 degrees C or any surface needing heat insulation.
• On a bare furnace exterior surface, it’s application has shown the minimum reduction of 10% in temperature. (Deg Celsius) checked with infrared thermometer.
• It is tested by I. I. T. Mumbai. And National Coatings Corporation California, U. S. A.
• If undisturbed it does not need reapplication for about five years.
• In some cases where the application is done both interior and exterior, 40% saving is achieved. Hence ideal saving can be achieved just by applying UGAM THERMAL INSULATION COATING paint.
• In industries where heat is used for process, UGAM Thermal Insulation Coatings are used for energy saving purpose up to 1800 degrees C.
• It reduces heat transfer from inner shell to exterior and hence reduces fuel consumption thereby increasing energy saving.
• The separate list of jobs completed satisfactorily is attached herewith.
• The material is also being exported to gulf countries and the live demo can be given at your end any time, on request.
• The technical specification is correct to the best of our knowledge and under test conditions and we do not accept any liability towards misuse and contents of it. Product must be tested for specific use prior to use.

Additional Information:

• Item Code: UGAMPUSICOMPOSITEHRTI400