Other Products / Services #3266390

By adopting cutting edge technology, and making use of qualitative raw material, we have come up with a high performing range of reaction tanks. Fabricated in accordance to the market requirements, these reaction tanks are used for handling corrosive chemicals in harsh conditions. These reaction tanks aid automatic and easy control of more than one process at a time. 

Designed up to 300 bar pressure with extra safety equipment, these tanks are designed and installed on the basis of type of fluid, nature of fluid, temp.

Details of Hot Air Generator

A fully automatic multi pass counter current Hot Air Generator consist of stainless steel shell type integral combustion chamber accommodated in multi M.S. shell. The cold air is inserted by a suitable capacity blower fan in first pass, absorbs heat from flue gas passage and accordingly both hot flue gas and cold air travel in opposite direction in the passage which ultimately transfers 90% heat to cold air and delivers hot air from hot air outlet hole. The system functions fully automatic on temperature sensing device installed at hot air outlet which ON-OFF the burner at pre-set temperature. the system is a package type unit, fixed on common base frame.

Our company manufacturer and supplier Pulse jet dust collector india and world wide trade.

The plant has been configured and designed in such a way that minimum work force will require. The guar split will be fed in to the pneumatic system to feed in to the turbo screen. The turbo screen is suggested at the high of plant. The screening will be employed for the removal of foreign matter. This screened material will be stored in a storage hopper. The guar splits will fall from the screens by gravity to the storage hopper, which is configured below the screen. From storage hopper material can be taken in to double cone mixer as and when required by gravity for the rehydrating of guar splits.All the rehydrated guar split will be sent to the hopper of Flakers at a time by gravity. Flakers will crush the guar splits and crushed guar splits will go into the ultrafine grinder at the uniform rate.

We ultra febtech - an iso 9001:2008 certified company engaged in manufucturing of cmc plants to convey the material. First cellulose react with caustic to form alkali cellulose then react with mono chloro acetic acid or its salt from sodium carboxy methyl cellulose. During the reaction of alkali cellulose with etherification agents and in the subsequent reactions, sodium chloride (common salt) is produced as a major by-product. This is washed out together with any other byproducts or, in the case of technical-grade nacmc, left in the product. The dried cellulose ethers are then processed into granular or powder products and in some cases modified with other additives.

We ultra febtech - an iso 9001:2008 certified company engaged in manufucturing of tkp plants to convey the material. The plant has been configured keeping in mind minimum manual operation. The material will be fed into the pneumatic system and will be conveyed to the reactors. The one hold up hopper (storage feeder) will help to save the time between two batches. Raw material tamarind kernel powder seeds is treated with the chemicals as described in the process in the reactor. For effective use of the plant, two reactors are suggested with medium size s those are more convenient and economical to use. To add chemicals, three metering tanks are suggested. To maintain temperature or to increase temperature of the material in the reactor, hot water tank is provided. This hot water tank is equipped with coils to maintain the desired temperature of the water. The reacted mass is sent to the ultrafine grinder. Ultrafine grinder can grind the material with minimum thermal degradation compared to other grinders. Material coming out from the grinder will have high moisture due to addition of moisture in the reaction stage.

We ultra febtech - an iso 9001:2008 certified company engaged in manufucturing of guar gum to convey the material.The plant has been configured and designed in such a way that minimum work force will require. The guar split will be fed in to the pneumatic system to feed in to the turbo screen. The turbo screen is suggested at the high of plant. The screening will be employed for the removal of foreign matter. This screened material will be stored in a storage hopper. The guar splits will fall from the screens by gravity to the storage hopper, which is configured below the screen. From storage hopper material can be taken in to double cone mixer as and when required by gravity for the rehydrating of guar splits.All the rehydrated guar split will be sent to the hopper of flakers at a time by gravity. Flakers will crush the guar splits and crushed guar splits will go into the ultrafine grinder at the uniform rate. Ultrafine grinder is proposed for the grinding of crushed guar splits. This grinder has ability to grind the material without generating too much heat. Material will be fed into the dryer. Oil will be the media to convey the heat and deliver to the air. This hot air will take the material into the dryer line where actual drying will take place. Attached cyclone system will separate the material and hot air. To heat the oil thermal boiler will be used. the material will be screened through centrifugal screen. Material passing through the screen will be again screened through turbo screens as additional control. This material will be sold as a premium product. Oversize of the centrifugal screen will be screened through turbo screen to separate another grade in terms of particle size followed by additional screening. The oversize will be screened through another turbo screen to separate another grade. Oversize will be passed through another grinder.

A good range of batch type ball mills to crush even the hardest materials like, quartz, topaz, ceramics, silica, etc. different types & materials of liners and grinding device is used such as hyper steel, stainless steel, Mn. Steel, ceramic etc., may be selected to suit the requirement.

A centrifugal discharge elevator may be vertical or inclined. Vertical elevators depend entirely on the action of centrifugal force to get the material into the discharge chute and must be run at speeds relatively high. Inclined elevators with buckets spaced apart or set close together may have the discharge chute set partly under the head pulley. Since they don't depend entirely on the centrifugal force to put the material into the chute, the speed may be relatively lower.Accessories for loading the buckets or picking up the material, for receiving the discharged material, for maintaining the belt tension and for enclosing and protecting the elevator.

It is a specifically developed machine for screening jobs of continuous type. A rotating screen with simultaneously rotating paddles inside which accelerates material for faster screening operations. A brush is also provided for cleaning the surface and enabling removal of chocking incidents.

Application In:

Food, Pharma, Chemical, Minerals, Guar Gum / Starch / Cellulose etc.

This continuous mixer is use for solid-solid and solid-liquid mixing for medium to large production on continuous basis. This mixer has a single or double shaft with adjustable mixing paddles. In Horizontal mixer the mixing purpose can be solved with interned impact and up-down movement. The output production range of this mixer is 100 Kgs. to 20000 Kgs.

Application In:

Chemical, Minerals, Fertilizers, cement, Guar Gum / Starch / Cellulose etc.

Pneumatic Flash Dryer will be effectively used for drying the wet material and convey it. The drying takes place in wide and high vertical tube. The material is sucked into the tube with a negative suction. The hot air is also carried with the material. Cyclones will be attached for the air and material separation. Necessary air lock will be provided with the system.

Available size : 4" to 20". Rotary Air lock valve is suited for low and medium differential air pressure systems, gravity, or volumetric feeder discharge equipments. This will allow free flowing solids to pass from one to another valves space with a different air pressure. Rotary airlock is useful as one component in a bulk or specialty material handling system.

Blower is mainly used for transmission of air outside from various locations. It has got a wide range of applications like industrial, environmental, instrumentation, and chemical processing applications.
Our centrifugal blower is designed after a long research work carried out for specific requirements of our customers. We have developed the blower with special features more airflow in lower power consumption, maintenance free, long life smooth running with direct drive or V-belt driven.
We make a wide range of standard and customized blowers in MS and SS materials & various models.

We make different types of sievers like eccentric siever, vibro siever, rotary siever, centrifugal siever etc.

We are renowned in the design and manufacture of size reduction, gradation and mixing equipment.

Gradation equipments like siever, rotary siever, screening equipments, Vibro screen, centrifugal shifter, Vibro shifter

High - efficiency vibratory separators, available in size from 24” to a large one 72” in diameter. Creative design features maximize screen utilization, efficiently handle widely varying feed rates and consistencies, increase throughput, prevent blinding. One to multilevel screen surfaces yielding desired numbers of predetermined fractions with accurate separations in various mesh sizes. The equipment also can be supplied with dust cover and other special auxiliaries. Material of construction will be choice of customer and largely will depend on the application.

Application In:

Food, Pharma, Chemical, Minerals, Guar Gum / Starch / Cellulose etc

The rotating paddles break up soft agglomerates and propel individual particles through the screen while rejecting hard lumps and trash. This makes ease of screening even to the powders that has poor flow ability. A compact appearance, quiet operation, and high output make this rotating screen a highly acceptable for the various applications of the powder screening. These are available in various materials of constructions.e in various materials of constructions.

Bucket elevators are designed to move flowing powders or bulk solids vertically. Bucket elevators use an endless belt or chain and have a series of buckets attached to it. Bulk material is spread into an inlet hopper. Buckets (or cups) dig into the material and convey it up and over the head sprocket/pulley, and then throw the material out a discharge throat.

Abucket elevator, also called agrain leg, is a mechanism for hauling flowable bulk materials vertically.

It consists of:

1. Buckets to contain the material;2. A belt to carry the buckets and transmit the pull;3. Means to drive the belt;4. Accessories for loading the buckets or picking up the material, for receiving the discharged material, for maintaining the belt tension and for enclosing and protecting the elevator.

A bucket elevator can elevate a variety of bulk materials from light to heavy and from fine to large lumps.

A centrifugal discharge elevator may be vertical or inclined. Vertical elevators depend entirely on the action of centrifugal force to get the material into the discharge chute and must be run at speeds relatively high. Inclined elevators with buckets spaced apart or set close together may have the discharge chute set partly under the head pulley. Since they don't depend entirely on the centrifugal force to put the material into the chute, the speed may be relatively lower.

We are offering reaction vessel.Reaction vessel is made according to customers specific requirements in different sizes, shapes, with without jackets, various types of agitators, with limpet coils. They are designed and fabricated to match the optimum process conditions of temperature and pressure with efficient mixing application.

We offer Tray Dryer.We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufucturing of Tray Dryer to Convey the Material. This is a batch type Tray dryer suitable for small quantities wet material. It is either in MS or SS. Trays of SS or aluminum ranging from 12 392 can be supplied according to customers requirement. The same is either provided with steam or electrical heating arrangement. Proper insulation is given to minimize heat losses. It has also auto start and cut off facility to maintain optimum temperature in the chamber. It has two to four fans according to trays capacity.

We offer Heat Exchanger.We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufucturing of Heat Exchanger to Convey the Material. A heat exchanger is a piece of equipment built for efficient heat transfer from one medium to another. The media may be separated by a solid wall, so that they never mix, or they may be in direct contact. They are widely used in space heating, refrigeration, air conditioning, power plants, chemical plants, petrochemical plants, petroleum refineries, natural gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air.

We ultra febtech - an iso 9001:2008 certified company engaged in manufucturing of continuous mixer to convey the material. This continuous mixer is use for solid-solid and solid-liquid mixing for medium to large production on continuous basis. This mixer has a single or double shaft with adjustable mixing paddles. In horizontal mixer the mixing purpose can be solved with interned impact and up-down movement. The output production range of this mixer is 100 kgs. To 20000 kgs.