Other Products / Services #2238935

technical specifications for solar charge controller

1.nominal voltage : 12v /24v/36v/48v dc

2. max. Charging current : 10a/20a/30a/ 40a/50a/75a/100a

3. deep discharge protection : 10.5v/21.0v

4. Over charge protection : 14.4v/28.8v

5. Restart of charging : 12.5v/25v

6. Reconnection of load : 12.5v/25v

7. Output load current : 10a max.

8. Battery ah rating : 100ah max.

9. Solar panel : 120watts max.

10. Operating temp. : 50c

11. Self consumption : 25ma

12. Protection : a)battery reverse protection

b)solar panel reverse protection

c)battery over charge protection

d)over load protection

13. indications : a)charging on solar

b)battery low

c)over load

d)16x2 lcd display to readreal timeand to set the loadonby offtime

SPECIFICATIONS I: Parameter: i) Control Voltages: 1. SPV panel disconnection level : 16V + 1VTo prevent from over charging 2. SPV Panel reconnection level : 14V +1V 3. Battery low level cut off : 9.5 + 0.5V 4. Battery reconnection level : 10.5 + 0.5V 5. Disconnection and reconnection : will be automatic ii) Protections: 1. Against battery reverse connection for control unit and load. 2. Against short circuits in the load path by electronic short circuits protection and fuse 3. Against over charge of battery. 4. Against excessive discharge of battery. 5. Against reverse current flow from battery to SPV Panel. iii) Indications: 1. AC ON - green LED. 2. Charging by solar PV module - green LED. ( ON.SPV) 3. Charging by A.C power - green LED. (ON.AC) 4. Battery low - Red LED. 5. Batter Reverse polarity - Red LED. ( BATT.REV)

SPECIFICATIONS 1) Input : 220V +10% 50Hz (AC line power) 2) Output : a) 40V to 75 DC Variableb) 0 to 10V DC Variablec) 20-70V DC Variable3) Output current : a) 0 to 3 Ampsb) 0 to 5 Ampsc) 0-750mA4) Digital display : 4 digit meters for measuring voltages and currents 5) Ripple : < 1% RMS at Battery 6) Efficiency : > 70%@ nominal input and outputat 100% load.7) Insulation resistance : > 2M ohm between the live point and the ground .8) The charger will be able to charge 24 cells of sealed lead acid batteries of 2V each with constant voltage and current limit to a maximum of 3Amps. 9) Discharge facility : Suitable load will be provided for discharging the battery 24 cells of2V each @ C/10 rate (25Ah Battery).This is in order to discharge the cells up to Cut-Off voltage of 1.70V prior to starting of recharge. 10) The battery charger will be provided with over voltage short circuit battery reversal and under voltage cut-off. 11) The charger will be provided with input on discharge ON indication. 12) The charger Input/Output will be terminated on Front Panel.

TECHNICAL SPECIFICATIONS DUAL POWER SUPPLY FOR PURE AIR GENERATOR 1. Output Voltage (Pure sine wave) : 115V AC (98 124V AC)Current Rating : 6AmpsFrequency : 400Hz (380-420 Hz)Load type : Inductive 2. Output Voltage : 28V DC (18 30V DC)Current rating : 300mAmpsRipple : 3mV RMSShort circuit protection & Over load protection 3. Input Voltage : 230V AC (207 250V AC)Frequency : 50Hz (48 52Hz) 4. Indicators : AC Voltage, Current: DC Voltage, Current

SPECIFICATION FOR 12W LED STREET LIGHT1 Input Voltage Range :85VAC - 270VAC2 Frequency Power :47-63Hz3 Power Factor : > 0.904 Light Source: 1.2W High Power LED5 LED Quantity :9Pcs6 LED Luminous Efficiency :100lm/W7 Luminous Flux :850lm8 LED Consumption: 12W9 Power Supply Consumption :1.2W10 Total System Consumption: 15W11 Colour Temperature :6500K12 The Maximum Light Intensity Angle: 120o = Horizontal : 110o Vertical 45o13 Working Temperature 50oC to -10oC14 Working Humidity: 10% to 90% Rh15 Working Life > 50, 000 Hrs.16 Body Material Aluminium Alloy/ABS17 Total Harmonic Distortion :< 20%18 Installation Tube Dia 38mm19 CRI Ra >7520 LED Seoul Semiconductor21Illumination at 6M height: >5.5 Lux8M height :>3.2 Lux10M height:>1.9 Lux12M height:>1.3 Lux22 IP Rating IP65

We are the main manufacturers and wholesale suppliers of Dual Power Pure Air Generator from Telangana, India. We are appreciated in the market for offering a wide range of Dual Power Pure Air Generator in various specifications using best quality raw material, and having a longer service life. We have a team of professionals who carefully processes the Dual Power Pure Air Generator and tests it on a variety of parameters to ensure that they are pure and comply with the clients specifications. For the convenience of our clients, we package the Dual Power Pure Air Generator in safe packing boxes/bags and deliver within a short span of time. While the Dual Power Pure Air Generator is protected against short circuit & over load protection, its voltage is of 300m Amps.

Battery Charger Cum Power Supply