Our Products
Lightweight Adjustable telescopic feet with pivoting sole plate Anti-slipping rubber pads.
Confirms to EN 795-B: 2012, EN 1496:200
The Delsar Life Detector is a seismic/acoustic listening device designed specifically to detect and locate trapped live victims in collapsed structures caused by earthquakes, explosions, landslides, mine disasters or construction cave-ins.The LD3 is smaller, lighter and more sensitive, with new features designed to make victim detection and locations easier and more accurate.
ComplianceEN 61000-6-3: 2000, 2001, A11:2004 EN 61000-6-1:2001FCC Part 15, Subpart B
To immediately locate victims who are alive and are trapped under debris during a natural calamity or any other disasters i.e. earthquakes, landslides, explosions, construction cave-ins, mine disasters, building collapses. - Waterproof detachable camera head
ComplianceIEC 61000-6-3:2nd ED.2006, IEC 61000-6-1:2nd ED. 2005FCC CFR 47 Part 15/B IC ICES 003
FRP Ambulance Boat is used to attend & transport patients through water ways.
Features- Available in various sitting capacities- Equipped with essential medical equipment- Battery & solar charging system- Equipped with boat accessories- Equipped with fire & safety equipment
The Floating Pump is designed for the purpose of firefighting and rescue operations. The Floating Pump is lightweight, self-contained, driven by an air cooled, one cylinder, two-cycle petrol engine and capable of being carried by one person.The complete unit is designed for continuous operation at maximum rated output and is capable of running under load immediately after starting.
5 quart (4.7 Liter) capacity (1 to 1 hr running time)
High-density polyethylene shell filled with polyurethane foam (closed cell). - The Floto-PumpTM does not require a suction hose or foot valve.- The pump self-primes within a few seconds.- The standard model is most frequently used for water transfer- It can operate from a minimum water level of 6 & more
It is used for transportation of men & material for Search & Rescue Operations. It is capable of carrying out all forms of Search & Rescue, Retrieval & Service.
6-8 Persons & 8-10 Persons
Impermeable, light weight polymer coated fabric 1670 DTX 1500GSM confirming to BSMA16.
Foot Pump, Repair Kit, Valise and Paddle.
Grey, Orange, Black
Heavy duty Nylon fabric coated with Hypolon on outer side and neoprene on inner side. Boats are supplied with or without OBMs in various capacities as per requirements.
Unicare make IRS Approved Lifebuoy
- Buoyancy: 16 Kg - Life Buoy 2.5 Kg is having OD =71 cms, ID = 45 cms IRS Approval No. 2016TAC121
- Life Buoy 4 Kg is having OD =75 cms, ID = 46 cms IRS Approval No. 2015TAC017 - Life Buoy Light Model ULBL 17 IRS Approval No. 2015TAC072
Unicare make IRS approved Life jacket.
- Vest type- Buoyancy: 16 Kg- With Solas reflective tape and signaling whistle- Life Jacket Light (optional) Model ULJL 15
- Life Jacket ULJ 15 IRS Approval No. 2018TAC006 - Life Jacket Light (optional) Model ULJL 15 IRS Approval No. 2015TAC036
An outboard motor is a propulsion system for boats. OBMS are the most common motorized method of propelling small watercraft.
- Power: 9.9 HP to 300 HP- Engine Type: 2 & 4 Stroke - Starting System: Manual & Electrical
Electronic Flow meter gives pressure and flow on the display screen of the flow meter.
- Flow meter comes with the 4 foldable legs and can measure flow from minimum 500 LPM to 3000 LPM- It has blue tooth connectivity to download data on a computer- It is light in weight - Come with the Instantaneous coupling and is supplied in a hard pelican suitcase for easy carrying - It is supplied with battery charger & data logger cable - Flow meter is rugged and water proof with IP 65 - Battery: Ultra lite Li-Ion with long durability of 10 hours continuous use once charged fully
6.1 kg
Flow meter also available to measure flow rate to measure up to 20000 LPM.
The BELIER piercing nozzle is designed for indoor and outdoor fires. The hoof helps to break the wall while thepiercing tip perforates the wall, creating an opening. The nozzle head is introduced in the section through the wall, connect the water supply hose under pressure to the shutoff valve. Many holes oriented in all directions ensure a spherical diffusion, rapidly suffocating the fire.
- Hardened tip to pierce through the brick walls- Tip has a multidirectional diffusion head for water - Flow rate up to 460 LPM - Having shut off handle with polyurethane cover - Handle on body of the nozzle for proper holding - The tip and shut off handle can be removed for easy storage and maintenance
High class Stainless Steel
8.5 KG
920 mm
7 bar
Self-Educting Foam Nozzle. This self-educting nozzle has an ultra-compact mixing system integrated in the grip of the nozzle and does not require an external foam eductor.
- Stream patterns can be changed by rotating head ring - jet, fog & wide angle fog- Nozzle has spinning teeth for better fog stream - The operating handle enables a quick open/close of the nozzle - Supplied along with a pickup tube - Nozzle is pre calibrated for 3% foam concentration- Pistol Grip- Flow rate 95 GPM
Aluminium alloy - Hard anodised
3 kg
7 bar
Download P
Premium Multipurpose Nozzle
- Selectable flow rate - 150, 250, 350, 500 LPM & Flush - Light weight and easy to handle - Stream patterns can be changed by rotating head ring - jet, fog & Wide angle fog - Spinning teeth for better fog pattern
Aluminum Alloy - Hard Anodised
2.5 KG
Swivel Inlet
6 bar
Versatile tower / sit harness designed for fall arrest, positioning, restraint, frontal attachment for use in construction, tower work, rescue operations and utilities
1 large Dorsal D-Ring with provision of specially designed distributor and 2 work positioning large D-Rings with 2 belay textile loops at the front.
For more user comfort, specially designed leg pads with firm support back pad with easy movement waist belt, adjustable leg pads. Adjustable 45mm floating buckles with knurled bar for shoulder size adjustment Attachment of textile loop at the front side can be used as a single connection point by using a Y-connection.
Confirms to EN:358:1999 & EN:361: 2002
Lightweight work positioning harness specially designed for maintenance work which allows the worker to concentrate more effectively on the work being carried out and offers very high level of safety
2 side positioning D-Rings
Attachment of small D-Rings to the back-pad for tool holding purpose while working at higher elevation, adjustable waist straps
Standard
Confirms to EN 358:1999
Extra comfort sit harness designed for industrial access and rescue operations
2 lateral D-Rings for work positioning lanyard and one on the lower abdomen to provide balance while working
Soft padded waist and leg pads for working for an extended period of time, adjustable thigh straps with vertical support
Confirms to EN:358:1999 & EN:813: 2008
Easy to fit Light WeightAdaptable to all harnessesReflective Tape for day and night visibilityHigh visibility fluorescent Orange / GreenHemmed edge for durability and neatness
With Fire Resistant Cover With UEE 301 Scaffold Hook on both ends
CABLE SELF-RETRACTABLE FALL ARRESTER WITH WINCH + 1 AMO20 30 MProduct specifications Self retracting fall arrest in steel cable with removable rescue hoist. Steel housing. Inertia locking system. Energy dissipater
The Derope in the descender range are rescue devices used to descend from a height at a limited speed, either solo or with the assistance of a rescuer.
The Derope is ideal for evacuation from structures such as elevated platforms, telecom or electricity pylons, tower cranes, wind generators, etc.The Derope can operate in alternate directions if a number of people have to be evacuated from the same area
Confirms to EN 341 A, EN 1496 A
Special harness for evacuation operation, easy to install even with a person lying on the ground. Due to its 3 adjustment settings, the HT9 can be used with both children and adults.
Available in desired length of diameter 11 mm / 13 mm / 14 mm / 16 mm With loops-optional
Breaking Strength22 kN
Manual Worm Gear WinchThe gears have been fully subjected to endurance and destruction test. Hubs machined to retain lubricationAutomatic ratchet brake with stainless steel spring on both seriesWeather resistantMechanism protected by a removable casingSafety device to prevent release of the machine when it is under load
Dynafor is highly accurate instrument for measuring tensile forces and suitable for wide variety of applications where an instant indication of the load applied is required.
Industrial dynamometry providing the highest degree of ergonomics, precision, flexibilityIt can be operated through cable and remote controlWide range of load measuring capacity, WLL-250 Kg to 250 tons
EMC and EEC, Confirms to EN: 12100-1 and EN 12100-2
A transportable interim anchorage device with aluminium alloy wheels. It can be attached to beams of width 76 to 255 mm Load Bar: Aluminium Alloy [7075-T6] Clamps [JAWS] With Roller: Aluminium Alloy [7075-T6] D Ring: Steel Alloy SAE4140 - Nickel Plating End Screw: Carbon Steel - Nickel Plating Spring: Stainless Steel Strap: Polyester
Minifor is used to lift or pull objects over great distances depending on the wire rope length. They are suitable for use in numerous configuration.
Lightweight, quick installation, portable, heavy duty and powerful motorized hoist with a traversing wire rope
It is a hoist for lifting and pulling loads over unlimited distances and for totally safe inspection on buildings, towers, masts, power stations, chimneys, bridges, dams, ships, industrial installation
FeaturesPowered hoist through which the wire rope passes Unlimited length of wire rope, Constant speed, orientation in direction of effort, Mobile and compact: 300 kg to 3000 kg WLL
To position or to lift components, to lift foldable wind turbine, to pull or tension wire rope
FeaturesConstant torque which allows using long wire rope without any losses in pulling force, portable, high accuracy and available from 800 kg to 3200 kg
Used to lift and transfer loads. Suitable for handling relatively heavy objects while simultaneously reducing the physical effort of the user
Efficient, versatile, mobile and compact manual chain hoist with self lubricating ant- corrosion chain
250 kg to 20000 kg
Karabiners have manual or automatic locking systems. The Karabiner connectors are available in a variety of opening widths allowing to lock on a variety of structures.
Steel, Self Closing, Self Locking, Opens only by two deliberate consecutive manual actions
Small compact size with carrying handle making it more convenient for portability and transport. Large filling cap for easy filling, cleaning and inspection.
Self Contained chemical resistant gravity fed unit provides 15 minutes of decontaminating water flow at
UPEW 14 | 2 LPM | 34 liters |
Small compact size with carrying handle making it more convenient for portability and transport. Large filling cap for easy filling, cleaning and inspection. The eye wash is activated by simply pulling the retractable tray/pull strap. High visibility translucent green/yellow container indicates water level. Mounted on bracket supplied that easily bolts to wall.
Chemical and pharmaceutical work sites, Fire and Emergency Teams, Hazmat vehicles, Remote places in Mining, Agriculture and Construction.
Lightest welding helmet (450 g) with total head, face and neck coverage Viewing Area: 96x39mm
Lightest welding helmet (450 g) with total head, face and neck coverage Viewing Area: 96 x 39mm Switching Time: 1/30000 S, (+23C)Dark to Light delay: 0.1-1.0 SPower Supply: Solar PanelsPower Backup: Rechargeable battery (replaceable 1*CR2032) Eye Protection: UV/IR to shade DIN 9-13 (Variable)Arc Sensor: 2
General welding (TIG, MIG, Arc)
Confirms to EN175F and EN379 (Optical class-1/1/1/2) & EN166 approval automatic darkening welding filter
Stylish over spectacle offering integral & lateral protectionHeavy duty inclination system-allow in a Pantascopic adjustment
Stylish over spectacle offering integral & lateral protection Heavy duty inclination system-allow in a Pantascopic adjustment
Wide vision goggle designed to give optimum fit to all facial contoursFits over almost all prescription eyewareWrap around modern style provides excellent panoramic visionAnti scratch and anti fog coated lens on both sides
Wide vision goggle designed to give optimum fit to all facial contours Fits over almost all prescription eyeware Wrap around modern style provides excellent panoramic vision Anti scratch and anti fog coated lens on both sides
Sporty look, plastic frame with side shield protectionSide pieces adjustable to 4 different lengthLow-energy impact F (45m/s)EN certified to W 166 F DIN CE on the frame
Material: Available in PC and CR 39 Prescription type: Single, Bifocal and Progressive Optional features: Polarized, Photochromatic, lens tinting, antireflection coating available on request Certification: ANSI
Soft clear vinyl chemical resistant frame for maximum comfort and 100% sealing Unique indirect ventilation system for air circulation
160 peripheral vision replaceable poly-carbonate lens
Soft clear vinyl chemical resistant frame for maximum comfort and 100% sealing Unique indirect ventilation system for air circulation Designed to be worn over numbered spectacle
Guards against exposure to chemical liquids and splashes as well as dust
Conforms to IS 5983:1980
Rugged, lightweight, flame retardantConcealed handle protects users hand
Rugged, lightweight, flame retardant Concealed handle protects user's hand
Confirms to EN 176:08:97Conforms to IS:5983:1980
Anatomical shape and soft material allow close, comfortable fitFits comfortably over most prescription spectaclesHigh-quality, easily adjustable headbandOptically correct lens (EN 166 class 1) does not distort view or cause headaches Simple lens replacement reduces costMounted faceguard
Material: PC clear, 2.2mm thickness Filter: 2-1, 2 (DIN EN 170) Coating: Supravision HC-AF (Outside anti-scratch, permanent inside anti fog lens) Impact resistance: B (120m/s) according to DIN EN 166
With optically correct toric toughened lensWith 6 din lens, SF2 blue lens, 11 din lens
With optically correct toric toughened lens With 6 din lens, SF2 blue lens, 11 din lens
Conforms to IS 5983:1980
Accommodates any two cylinders, each up to 12 in diameter including class 300 SCF industrial gas cylinders and No.5 acetylene cylinders Load Bearing Capacity UDL: 5001bs/ 227kg
Accommodates any two cylinders, each up to 12" in diameter including class 300 SCF industrial gas cylinders and No.5 acetylene cylinders Load Bearing Capacity UDL: 5001bs/ 227kg
Transports 55 gallon drums with ease, tilts to become an efficient self-dispensing station and acts as its own secondary containment unit
Transports 55 gallon drums with ease, tilts to become an efficient self-dispensing station and acts as its own secondary containment unit Tough polyethylene construction, cannot rust or corrodeHold up to 600 lbs to cover most applicationsLoad Bearing Capacity UDL: 6001bs/ 273kgSump Capacity: 80gal / 303kg
Meets EPA40 CFR 264.175, SPCC and NPDES regulations
Salvage Drums is versatile unit that can directly contain solids and sludges with security. With a 1/2 turn lid, these ergonomically designed units allow for easy access, unlike competing hoop-ring designs. These are available for 20 / 30 / 50 / 95 / 110 gallon Salvage Drums.
Salvage Drums is versatile unit that can directly contain solids and sludge's with security. With a 1/2 turn lid, these ergonomically designed units allow for easy access, unlike competing "hoop-ring designs." These are available for 20 / 30 / 50 / 95 / 110 gallon Salvage Drums.
UN 1 H2/X75/S, DOT 49CFR 173.3(c), EPA, SPCC and NPDES
Basic spill kits contents: Pads /Socks / Disposal Bags /Ties/ Nitrile Gloves /Safety Goggles Available in 5, 20, 30, 50, 65 and 95 gallons. Available in Oil only, Universal and Hazmat type
Basic spill kits contents: Pads /Socks / Disposal Bags /Ties/ Nitrile Gloves /Safety Goggles Available in 5, 20, 30, 50, 65 and 95 gallons. Available in Oil only, Universal and Hazmat type
Secondary containment systemLoad Bearing Capacity UDL: 6000Ibs / 2722kg SumpCapacity: 66gals / 2501iters
Secondary containment system Load Bearing Capacity UDL: 6000Ibs / 2722kg Sump Capacity: 66gals / 2501iters
Meets EPA 40 CFR 264.175, SPCC and NPDES regulations
Safety Cabinet For The Pressurised Gas Cylinder-Supreme Plus As Per Din En 14470-2 Type G90, Door Hung RightTested by TUV SOD according to DIN EN 14470-2, Laboratory Furniture Standard DIN EN 14727.
W 595 x D 610 x H 2070 MMVenting connection socket ( NW 75) on the top of the cabinet and ventilation grille on the door front. with 2 wing doors, with 6 pull-out trays made from PE and base set back with 85 mm height.
GS & CE mark High Quality mark of approval awarded by TUV SOD
approx. 348 kg
Roll-in flap with arrest system, Cylinder holder including 2 retaining belts and 2 horizontal installation rails for mounting gas fittings / Door handle with cylinder lock.
Safety Cabinet as per DIN EN 14470-1 with single wing door technology. For the Storage Flammable Liquids Type 90 90 Minutes Fire Resistant Cabinet with interior fittings in stainless steel. Style: Classic Line
W 1195 x D 595x H 2080 MM Outer carcass made of Sheet Steel, powder-coated in RAL 7035 light grey & Wing doors in RAL 1018 zinc yellow. With 3 shelves, 1 bottom tray, 1 perforated sheet insert made from stainless steel 1.4301
Tested safety at a high level including : TUV SUD DIN EN 14470-1 and Laboratory Furniture Standard DIN EN 14727, GS & CE mark.