Valsad, Gujarat, India
Our Products
KwikSense Smart Gas Transmitters are universal transmitters with plug & play sensor technology. They are capable of accepting more than 100 smart gas sensors. Its non-intrusive calibration helps customers to calibrate the transmitters in hazardous area without opening the transmitter thus reducing the down time for calibration. Alternatively the smart gas sensors can be plugged out and calibrated in the lab and can be put back on the KwikSense transmitters.
KwikSense Smart Digital Gas TransmitterKwikSense series digital gas transmitter is a field mountable device suitable for the detection and continuous monitoring of hazardous gases at industrial locations. It provides an RS-485 MODBUS-RTU digital output signal that can be connected to any suitable control system viz. Uniphos controller, DCS, PLC, etc. It also provides an industry standard 4-20 mA analog output. The KwikSense is available for a large number of toxic and flammable gases viz. CO, H2S, SO2, Cl2, NH3, HCN, HCl, NO2, CH4 (%LEL), etc.
| Gas Name | Gas Codes | Range | Resolution | Sensor Technology |
|---|---|---|---|---|
| Acetylene | 099C | 0 - 100% LEL | 1% LEL | Pellister |
| Acrylonitrile | 024A | 0 - 100 PPM* | 1 PPM | EC |
| Ammonia | 082A | 0 - 100 PPM | 1 PPM | EC |
| Ammonia | 082B | 0 - 1000 PPM | 1 PPM | EC |
| Gas Name | Gas Codes | Range | Resolution | Sensor Technology |
|---|---|---|---|---|
| Bromine | 061A | 0 - 20 PPM | 0.1 PPM | EC |
| Butanol | 099D | 0 - 100% LEL | 1% LEL | Pellister |
| Gas Name | Gas Codes | Range | Resolution | Sensor Technology |
|---|---|---|---|---|
| Carbon Dioxide | 025A | 0 - 5% V/V | 0.01% V/V | NDIR |
| Carbon Dioxide | 025B | 0 - 100% V/V | 1% V/V | NDIR |
| Carbon Disulfide | 021A | 0 - 100 PPM | 1 PPM | EC |
| Carbon Monoxide | 020A | 0 - 1000 PPM | 1 PPM | EC |
| Chlorine | 060A | 0 - 20 PPM | 0.1 PPM | EC |
| Gas Name | Gas Codes | Range | Resolution | Sensor Technology |
|---|---|---|---|---|
| Formaldehyde | 098A | 0 - 10 PPM* | 1 PPM | EC |
| HC (Methane) | 099A | 0 - 100% LEL | 1% LEL | Pellister |
| HC (Methane) | 099G | 500 - 10000 PPM* | 10 PPM | Solid State |
| Hydrogen | 090A | 0 - 1000 PPM | 1 PPM | EC |
| Hydrogen | 090B | 0 - 100% LEL | 1% LEL | EC |
| Hydrogen | 090C | 0 - 100% LEL | 1% LEL | Pellister |
| Hydro Carbon | 099H | 50 - 1000 PPM * | 1 PPM | Solid State |
| Hydrogen Cyanide | 075A | 0 - 100 PPM | 1 PPM | EC |
| Hydrogen Chloride | 070A | 0 - 20 PPM | 0.1 PPM | EC |
| Hydrogen Fluoride | 072A | 0 - 10 PPM | 0.1 PPM | EC |
| Hydrogen Sulphide | 030A | 0 - 100 PPM | 1 PPM | EC |
| Gas Name | Gas Codes | Range | Resolution | Sensor Technology |
|---|---|---|---|---|
| LPG | 099B | 0 - 100% LEL | 1% LEL | Pellister |
| Methane | 099E | 0 - 100% LEL | 1% LEL | NDIR |
| Methane | 099F | 0- 100% V/V | 1% V/V | NDIR |
| Mercaptan | 035A | 0 - 20 PPM | 0.1 PPM | EC |
| Nitrogen Dioxide | 081A | 0 - 20 PPM | 0.1 PPM | EC |
| Oxygen | 010A | 0 - 25% V/V | 0.1% V/V | EC |
| Ozone | 015A | 0 - 1 PPM | 0.01 PPM | EC |
| Pcl3 | 071A | 0 - 10 PPM* | 1 PPM | EC |
| Phosphine | 050A | 0 - 10 PPM | 0.01 PPM | EC |
| Phosgene | 055A | 0 - 1 PPM | 0.01 PPM | EC |
| POCl3 | 073A | 0 - 20 PPM* | 1 PPM | EC |
| Gas Name | Gas Codes | Range | Resolution | Sensor Technology |
|---|---|---|---|---|
| Styrene | 023A | 0 - 100 PPM* | 1 PPM | EC |
| Sulphur Dioxide | 040A | 0 - 20 PPM | 0.1 PPM | EC |
| Vinyl Chloro Monomer | 022A | 0 - 100 PPM* | 1 PPM | EC |
| VOC (Isobutylene) | 100A | 0 - 1000 PPM | 1 PPM | PID |
| VOC (Isobutylene) | 100B | 0 - 4000 PPM | 1 PPM | PID |
Chemical detector tubes from different manufacturers work on the same principle and they use similar or same sensing chemicals for detecting the target gas concentration. However the physical dimensions of the tubes and the pump design-draw the required 100 ml of sample air varies from manufacturer-manufacturer.
With our newly introduced KwikDraw Tubes based on MSA Detector Tubes Technology which we acquired recently and Uniphos Detector Tubes which we already have since 1996, we have detector tubes matching tubes from any manufacturers across the world.
More than 200 different UNIPHOS Gas Detection Tubes are available-accurately make spot measurements for over 500 gases and vapours.
The short-term UNIPHOS Gas Detection Tubes are used with the ASP-40 Air Sampling Pump.
Gas detector tubes provide a simple measurement technique-detect toxic gas concentration in air samples. The tubes are pre-calibrated and take only a few minutes-complete sampling. The concentration is read directly from the length of color stain.
It is useful for the air monitoring at work place & confined space in Industries like:
PN = Part Number | SMR = Standard Measuring Range | SPEC = Datasheet
New Uniphos Gas Detector Tubes| Gas Name | PN | SMR | Spec | |
|---|---|---|---|---|
| Nitrogen Dioxide & Nitric Oxide | SNDNO-4L | 2.5-200 PPM |
| Gas Name | Tube Code | Range | Extended Range | Spec | Uniphos Part No. | SDS |
|---|---|---|---|---|---|---|
| Acetic Acid | SAA-2 | 2.5-50 PPM | CF000001 | |||
| Acetone | SAC-5 | 50-4000 PPM | CF000002 | |||
| Acetylene | SAL-5 | 100-5000 PPM | CF000003 | |||
| Acetaldehyde | SAT-4M | 10-300 PPM | CF000621 | |||
| Acid Gases | SAG-2 | 2-40 PPM | 1-80 PPM | CF000680 | ||
| Acrolien | SAE-4 | 10-800 PPM | CF000745 | |||
| Acrylonitrile (DB) | SAN-4L | 5-120 PPM | CF000004 | | | ||
| Amines | SMA-3 | 5-100 PPM | 2.5-200 PPM | CF000668 | ||
| Ammonia | SAM-2 | 2.5-50 PPM | 1.25-100 PPM | CF000005 | ||
| Ammonia | SAM-3 | 5-100 PPM | 2.5-200 PPM | CF000006 | ||
| Ammonia | SAM-4M | 10-300 PPM | 5-600 PPM | CF000007 | ||
| Ammonia | SAM-4 | 50-1000 PPM | 25-2000 PPM | CF000008 | ||
| Ammonia | SAM-5 | 250-5000 PPM | 125-10000 PPM | CF000009 | ||
| Ammonia | SAM-8M | 0.5-10% | 0.25-20% | CF000010 | ||
| Ammonia | SAM-9 | 1-30% | 0.5-60% | CF000011 | ||
| Aniline | SAI-2 | 2-30 PPM | CF000013 | |||
| Arsine | SAR-2 | 1-30 PPM | 0.5-60 PPM | CF000014 | ||
| Aviation Oil | SAO-4 | 0.1-5 MG/L | CF000015 |
| Gas Name | Tube Code | Range | Extended Range | Spec | Uniphos Part No. | SDS |
|---|---|---|---|---|---|---|
| Benzene (DB) | SBE-2L | 0.25-12 PPM | CF000016 | |||
| Benzene (DB) | SBE-2M | 0.2-15 PPM | 0.1-75 PPM | CF000832 | ||
| Benzene | SBE-2 | 2.5-50 PPM | 1.25-100 PPM | CF000017 | ||
| Benzene | SBE-3 | 5-100 PPM | 2.5-200 PPM | CF000018 | ||
| Bromine | SBR-2M | 1-20 PPM | CF000019 | |||
| Bromine | SBR-3 | 5-100 PPM | CF000020 | |||
| n-Butane | SBT-5M | 50-1400 PPM | CF000627 | |||
| 1-Butanol | SNB-4L | 10-150 PPM | 10-300 PPM | CF000612 | ||
| 2-Butanol | SIB-4L | 10-150 PPM | CF000557 | |||
| 1,3-Butadiene | SBU-2M | 1-20 PPM | CF000021 | |||
| 1,3-Butadiene | SBU-3 | 5-100 PPM | CF000022 | |||
| n-Butyl Amine | SMA-3 | 5-100 PPM | CF000668 | |||
| Butyl Acetate | SBA-6 | 0.005-1% | CF000023 | |||
| Butyl Acrylate | SBC-3L | 5-60PPM | CF000024 |
| Gas Name | Tube Code | Range | Extended Range | Spec | Uniphos Part No. | SDS |
|---|---|---|---|---|---|---|
| Carbon Dioxide | SCD-5 | 300-5000 PPM | 150-10000 PPM | CF000025 | ||
| Carbon Dioxide | SCD-5.1 | 0.03-0.5 % | 0.015-1 % | CF000026 | ||
| Carbon Dioxide | SCD-5.2 | 100-5000 PPM | 50-10000 | CF000773 | ||
| Carbon Dioxide | SCD-7 | 0.25-3% | 0.125-6 % | CF000027 | ||
| Carbon Dioxide | SCD-8M | 0.5-10% | 0.25-20 % | CF000028 | ||
| Carbon Dioxide | SCD-8 | 1-20% | 0.5-40 % | CF000029 | ||
| Carbon Dioxide | SCD-10 | 5-60% | 2.5-60 % | CF000030 | ||
| Carbon Disuphide (DB) | SCS-2 | 2.5-50 PPM | 1.25-100 PPM | CF000032 | | | |
| Carbon Disuphide (DB) | SCS-3 | 5-100 PPM | 2.5-200 PPM | CF000033 | | | |
| Carbon Disuphide (DB) | SCS-5M | 50-1600 PPM | CF000034 | | | ||
| Carbon Monoxide | SCO-2 | 1-30 PPM | CF000753 | |||
| CO in CO2 | CCCO-2 | 1-50 PPM | - | CF000939 | ||
| Carbon Monoxide | SCO-3 | 5-100 PPM | CF000035 | |||
| Carbon Monoxide in H2 | SCH-3 | 5-100 PPM | CF000036 | |||
| Carbon Monoxide | SCO-4M | 25-600 PPM | 12.5-1200 PPM | CF000037 | ||
| Carbon Monoxide | SCO-4 | 50-1000 PPM | 10-2000 PPM | CF000038 | ||
| Carbon Monoxide | SCO-5 | 100-3000 PPM | 50-6000 PPM | CF000039 | ||
| Carbon Monoxide in H2 | SCH-5 | 100-3000 PPM | CF000642 | |||
| Carbon Monoxide | SCO-6M | 0.01-0.7% | 0.005-1.4% | CF000040 | ||
| Carbon Monoxide | SCO-8L | 0.1-7% | CF000750 | |||
| Carbon Monoxide | SCO-8 | 1-20% | 0.5-20% | CF000042 | ||
| Carbon Tetra Chloride (DB) | SCT-3L | 1-60 PPM | CF000043 | | | ||
| Carbonyl Sulphide (DB) | SCU-3 | 5-100 PPM | 2.5-200 PPM | CF000044 | | | |
| Chlorine | SCL-1M | 0.25-5 PPM | 0.25-10 PPM | CF000045 | ||
| Chlorine | SCL-2 | 2.5-50 PPM | 1.25-100 PPM | CF000046 | ||
| Chlorine | SCL-3 | 5-100 PPM | 2.5-200 PPM | CF000047 | ||
| Chlorine | SCL-4M | 50-500 PPM | 25-1000 PPM | CF000048 | ||
| Chlorine Dioxide | SCI-1M | 0.1-5 PPM | 0.25-10 PPM | CF000706 | ||
| Chlorine Dioxide | SCI-5 | 100-4000 PPM | 50-8000 PPM | CF000796 | ||
| Chlorobenzene | SCB-4L | 10-200 PPM | 5-400 PPM | CF000049 | ||
| Chloroform (DB) | SCF-3 | 10-100 PPM | CF000790 | | | ||
| Cyclohexane | SCY-5L | 10-1200 PPM | CF000050 | |||
| Cyclohexane | SCY-6L | 0.025-0.6% | CF000051 | |||
| Cyclohexanone | SCN-3 | 2-100 PPM | CF000052 | |||
| Cyclohexylamine | SCA-2 | 0.5-30 PPM | CF000656 | |||
| Chloropicrin (DB) | SCP-2M | 0.1-16 PPM |
Chemical detector tubes from different manufacturers work on the same principle and they use similar or same sensing chemicals for detecting the target gas concentration. However the physical dimensions of the tubes and the pump design to draw the required 100 ml of sample air varies from manufacturer to manufacturer.
With our newly introduced KwikDraw Tubes based on MSA Detector Tubes Technology which we acquired recently and Uniphos Detector Tubes which we already have since 1996, we have detector tubes matching tubes from any manufacturers across the world.
The combination of KWIK-DRAW detector tubes and pumps offers a quick yet precise measuring system to detect hazardous gases and vapours. The filling material in detector tubes is calibrated and adjusted to the required test gas and will change colour if this gas is present. The length of this discoloration indicates the concentration of the hazardous gas or vapour and can be measured by a printed scale on most of the tubes.
PN = Part Number | SMR = Standard Measuring Range | SPEC = Datasheet | MSDS = Material Safety Data Sheet
Gas name: A| Gas Name | PN | SMR | Spec | MSDS |
|---|---|---|---|---|
| Acetaldehyde | D5086813 | 5-50 ppm | ||
| Acetic Acid | D5086821 | 1-80 ppm | ||
| Acetylene | D5085822 | 400-8300 ppm | ||
| Acetone | D5086829 | 100-10000 ppm | ||
| Acetone | D5086837 | 25-3500 ppm | ||
| Acrolein | 10017882 | 0.1-10 ppm | ||
| Acrylonitrile | 10016376 | 0.5-30 ppm | ||
| Alcohols | D5086818 | 100-6000 ppm | ||
| Amines | D5086816 | 5-30 ppm | ||
| Ammonia | D5085845 | 2-600 ppm | ||
| Ammonia | D5085814 | 20-1000 ppm | ||
| Ammonia | D5086859 | 100-2000 ppm | ||
| Ammonia | D5085815 | 0.1-10 % ppm | ||
| Ammonia | D5085755 | - | ||
| Ammonia | D5085914 | 20-1000 ppm | ||
| Ammonia | D5086816 | 0.25-3 ppm | ||
| Arsine | 10072098 | 0.05-1 ppm |
| Description | Part No. |
|---|---|
| Air Tester HP | D3188702 |
| Air Tester HP | D5185710 |
| Action kit [Gas-Tester II H] | D5146803 |
| SF6 Sampling Kit | D5185700 |
For detection of PH3 at TLV level, for personal protection and safety.
Download Specification
It is useful for the air monitoring at work place & confined space in Industries like:
The Uniphos CEMS is an online analyser for measuring concentration of various toxic gases in industrial process/ boiler stack. Being capable of Auto /remote calibration with digital communication, it provides a complete solution for stack monitoring.
Uniphos CEMS are available based on different technologies depending upon the suitability and users requirement:
Chemiluminescence has long been recognized as the best practical analytical method for NOx detection at parts per billion level and with little or no interference from other pollutant gases. When nitric oxide reacts with ozone, nitrogen dioxide in the excited state is produced. These excited molecules return to ground state by emitting light in the region 600-2800nm which is measured using a Photomultiplier tube. The amount of light produced is proportional to the amount of nitric oxide in the sample. Hence the concentration of NO can be determined very accurately.
Measuring range:0-100 / 0- 1000 / 0-2000 ppm
Resolution:1 ppm
The Uniphos SO2analyzer is based on UV fluorescence technique, which utilizes measurement of SO2fluorescence typically in the range of 240-420 nm resulting from the optical excitation of SO2molecules. The fluorescence intensity is related to SO2concentration. Suitable techniques are adopted to remove interference from moisture and hydrocarbons to make the analyzer highly specific for SO2detection.
Measuring range:0-100 / 0- 1000 / 0-2000 ppm
Resolution:1 ppm
The UNIPHOS KwikAlert 300 gas monitor is a microprocessor based pocket size instrument for monitoring of work place environment for a specific target gas concentration for personal protection and safety. With KwikAlert by your side to warn you of any gas exposure hazard, you are carefree to concentrate on your work. The instrument when put on, will continuously monitor and display the target gas concentration. It also computes the TWA concentration, watch out for exceeding STEL or ceiling limit and alerts the operator by giving visual & audible alarms set by the users.
Uniphos Spectral Analyzer is based on UV-VIS technology using Trios sensor for detection of COD/BOD/ TSS/ Nitrites, etc.
UNIPHOS UV/VIS spectral analyzer is the new generation spectrophotometer for online analysis of organic loads and nitrogen components. Using the full spectrum analysis, the sensor is able to compute the concentration of different water pollutants like Nitrates, Nitrites, COD, BOD, TOC and suspended solids.
The analyzer comes with Trios sensor and a 7 touch screen HMI based controller. The controller supports 4 different sensors including Trios Spectral Sensor. They can be easily interfaced using RS 485 modbus communication. The USB port supports data logging, data download and software upgradations. The new innovative easy to use interface helps to configure the analyzer within minutes to start measurement and for setting required parameters. It also has a built in solenoid valve for auto purging / cleaning the sensors.
THE MOST COST EFFECTIVE MULTI-PATH GAS ANALYZER ON THE MARKETThe Multi Channel Analyzer is a rack mountable, fibre-coupled monitoring system that can make up to eight measurements simultaneously in a variety of safety, environmental, and process monitoring applications.
Leaksurveyor uses a fast response semiconductor sensor reducing the time taken for gas leak surveys on gas distribution networks. The Leaksurveyor detects flammable gas from PPM through LEL to 100 % Vol.
Download Specification
Uniphos portable single gas oxygen / carbon dioxide or combined oxygen and carbon dioxide analyser is an ideal instrument for checking modified atmosphere in food packages of any shape and size.
The instrument is attached with a sampling probe fitted with a syringe needle and can pierce any package and draw the sample air for 20 seconds at a flow rate of 4 ml per second.
A unique long life electrochemical sensor for oxygen and a compact mini NDIR sensor for carbon dioxide are used as detecting elements.
This light weight instrument is fully microcontroller based and has a working range of 0-100 % v/v for both oxygen and carbon dioxide with a resolution of 0.1 % v/v. The measured concentration is displayed on the OLED display on the front panel.
An optical instrument designed to measure the concentration of dust or particulate matter suspended in the exhaust gas passing through a duct, stack, or flue; typically the exhaust gas from an industrial combustion process or air filtration system.
Online Dust Analyzer uses the innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam Transceiver /Reflector arrangement. Increased particulate density in the stack causes the scattered light intensity to increase. When calibrated against reference standards, the intensity of this signal relates directly to the particulate concentration in the stack, and this can be used to display as a reading in mg/m.
Available for SO2, NOx, CO, CO2, etc.
Uniphos Stack Gas Analyzer is an online micro controller based system for measuring concentration of various toxic gases in industrial stacks. The analyzer comes with sample conditioning system incorporating dust filters / scrubbers for zero air generation, etc. With a purge system, the instrument can be programmed to periodically purge the sampling probe at required intervals. An inbuilt pump brings the sample from stack to the analyzer. The analyzer also provides Auto/ Remote calibration facility when connected to standard gas cylinder through a calibrator. Modern integrated circuits incorporated in this product provide all required annunciations and data communication to make the analyzer fail safe and user friendly.
Available for SO2, NOx, CO, O2, Cl2, HCL, NH3, etc.
Uniphos NDIR based CEMS are PLC based rugged and reliable system for measuring concentration of various gases from stacks. Non Dispersive Infra-Red technique is highly specific as it chooses gas specific infrared absorption wave length of the target gas by cutting off all other wave lengths. This technique is cost effective and reliable for measurement of gas concentration in parts per million range.
The analyzer comes with sample conditioning system incorporating dust filters / scrubbers for zero air generation, etc. With a purge system, the instrument can be programmed to periodically purge the sampling probe at required intervals. An inbuilt pump brings the sample from stack to the analyzer. The analyzer also provides Auto/ Remote calibration facility when connected to standard gas cylinder through a calibrator. It also provides all required annunciations and data communication protocol to make the analyzer fail safe and user friendly.
Available for SO2, NOx, CO, CO2, etc.
Uniphos Ambient Air Quality Monitoring System (AAQMS) is a fully integrated air quality monitoring station delivering high levels of performance. The analyzers are based on advanced technologies like Fluorescence, Chemiluminescence, UV & IR Photometry etc., which are highly sensitive and selective to target gases. The modular type station comes with standard rack type analyzers integrated with a big touch screen display.
Uniphos Ambient Air Quality Monitoring System (AAQMS) is a fully integrated air quality monitoring station delivering high levels of performance. The analyzers are based on advanced technologies like Fluorescence, Chemiluminescence, UV & IR Photometry etc., which are highly sensitive and selective to target gases. The modular type station comes with standard rack type analyzers integrated with a big touch screen display.
