My ExportersIndia

For Buyer

For Seller

For Help

Paints

Our product range contains a wide range of Chlorinated Rubber Paint (Unichlor CF), Unique Heat Resistant Silicone Aluminium Paint, Chlorinated Rubber Paints, Heat Resistant Silicone Aluminium Paints and Synthetic Enamel

Chlorinated Rubber Paint (Unichlor CF)

2,100 - 5,371 / Pack Get Latest Price
  • Number Of Flower Chlorinated Rubber Paint (unichlor Cf)
  • Certification ISO9001:2008
  • Application Brush
  • Packaging Type Multicolor
  • State Liquid
  • Packaging Type Plastic Bottle
  • Finish High Gloss

we bring the reliable chlorinated rubber paint (unichlor cf), which is a single pack, air drying chlorinated rubber finish paint. the topcoat buildcoat of chlorinated rubber paint (unichlor cf) is in chlorinated rubber systems. the chlorinated rubber paint (unichlor cf) is suitable for interior and exterior use. the chlorinated rubber paint (unichlor cf) is a fast drying paint with dry heat resistance up to 60oc. directions for use surface preparation & substrate condition suitable chlorinated rubber/ conventional/ epoxy primers or intermediates; dry and free from all contamination. in case of aged epoxy/conventional coating, the surface should be sufficiently roughened prior to painting. surface temperature must be at least 3oc above dew point but not above 50oc mixing : if setting is observed in the drum, loosen the settled material with the help of hand stirrer followed by power driven stirrer for quick homogeneous mixing. storage & packing

  • storage : store in a cool, dry place. store in accordance with local regulations.
  • packing : 20, 4 & 1 litre packs available in select shades

safety information as a general safety measure, inhalation of solvent vapors or paint mist and contact of liquid paint with skin & eyes should be avoided. forced ventilation should be provided when applying paint in confined spaces or stagnant air. even when ventilation is provided, respiratory, skin and eye protection are always recommended when spraying paint. please refer our material safety data sheet prior to using the product.

Application

Application Method Brush/Roller Air Spray Airless Spray
Recommended thinner T -333 T -333 T - 333
Volume of thinner 0 - 0% 5 - 20% 0 - 15%
Nozzle orifice   1.5 - 3.00 mm  
Nozzle pressure   0.3 - 0.4 Mpa (=approx. 3 â�� 4 atm, 43 â�� 57 p.s.i.) 10 -13 Mpa (=approx. 100 â�� 130 atm, 1400 â�� 1800 p.s.i.)

Technical Data

ColourRange
GlossEggshell
Volume SolidsApprox. 40%
Recommended DFT35 - 50 microns
Theoretical covering capacity11.4 sq.mtr/ | @ 35 microns DFT
8.0 sq.mtr/ | @ 50 microns DFT
Flash pointNot less than 27C
Drying time at 30oCSurface dry : 30 minutes
Hard dry : 8 hours
Over coating Interval at 30oCMin. : 8 hours
Max.: Unlimited, provided the surface is dry and clean from all contamination.
Shelf Life (cool and dry place)At least 12 months



View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us