The sun as your energy source comes within reach with a grid-connected solar inverter. This inverter, is our latest addition in the A-brand inverter range mainly intended for household use. Combined with solar panels, an effective environmentally friendly way to generate electrical energy is what you get.

The main components in a system are the Photovoltaic (PV) panels, Grid Interactive inverter(s), and the meter that records the amount of power produced.

PV Panels:

The PV panels convert the light reaching them into DC power. The amount of power they produce is roughly proportional to the intensity and the angle of the light reaching them. They are therefore positioned to take maximum advantage of available sunlight within siting constraints. Maximum power is obtained when the panels are able to 'track' the sun's movements during the day and the various seasons. However, these tracking mechanisms tend to add a fair bit to the cost of the system, so a lot of people either have fixed panels or compromise by incorporating some limited manual adjustments, which take into account the different 'elevations' of the sun at various times of the year. The best elevations vary with the latitude of your location. In the Southern Hemisphere, these panels should face as close to as possible.

Grid-Interactive Inverter: The Inverter takes the DC power produced by the panels, converts it to AC, and feeds it back into the main electricity grid. Some systems may have a number of smaller Inverters connected in parallel.

While power cuts eat into your profits, an inefficient DG set will simply add to your losses. Powered by Powerol engines, Mahindra Powerol DG sets have been designed to ensure you an efficient power supply. This also assures you years of hassle free operations.

Generates peace of mind:

Its recovery time, easily the best in its category, guarantees a seamless switchover to the back-up power. Moreover, its effective governing system controls the voltage fluctuations, thus ensuing complete safety of your equipments.

Silence certified:

Each and every Powerol DG set complies with the most stringent noise and emission norms stipulated by the Central Pollution Control Board of India (CPCB).

Performance unmatched:

Its got one of the most preferred engines fitted inside - the Mahindra Powerol engine. Compact and low on vibration, this engine has the smallest footprint as compared to other engines of identical ratings. Making the DG set apt even for roof-mountings.

No Compromise technology:

Its got other advantages too. Like, its transported through the Mahindra Transport Solutions Group. It is installed and commissioned through a Mahindra authorized dealer. It even comes with an annual maintenance contract.It is most fuel efficient in its classIt offers zero-leak enginesManual and AMF control panel options are also available

Preferred by all:

A Powerol DG set can be used in the Telecom, Defence and Railway sectors. It can also be installed at places like petrol pumps, hospitals, super markets, banks and construction sites

Pure Sine Wave Inverter:

Our Power supply is your total valuable solution of electric for small and home users.We are professional manufacturer and designer if Inverter and other power products,

NC Inverter series is a new milestone in the field of pure sine wave inverter.

Our technical advantages are as follows:

1) Completely controlled by CPU. These inverters are capable of driving highly reactive & capacitive loads at start up. Synchronized operation allows the transfer to be almost instantaneous.

Fast Automatic switching for continues power supply within 4 ms. When the Ac comesIt will start immediately; and when its over load, it will also lock itself at once, when you reduce the load, then it will start working automatically. For example, you dont need to restart you PC while using it with its integrated UPS Function.

2) Short circuit Protection and Overload protection. Wide input voltage: 90 V --- 280V.

3) Chargeing function is storng, quick and stable ; the average recharging current is 10 A Mps. ( But we can make it larger, It is up to customers requirements)

4) Pure sine wave output; 220V+3%(THD

The Unique servo control voltage stabilizers are extremely efficient stabilizers which meet the requirements of majority of your voltage fluctuation problems. Unique servo control voltage stabilizer are Electromechanical unites in which silicon solid state devices are employed to provide high reliability as well as long maintenance free service.

Unique servo control voltage stabilizers:

Special advantages offered by Unique servo control voltage stabilizer include virtually no wave from distortion, wide frequency range, very low internal impedance and efficiency better than 90%. The rated accuracy of the out put voltage is + 1% for all variations of line voltage or load current within the limits specified. Servo control voltage stabilizer are insensitive to the magnitude and power factor of the load and do not affect the system power factor.

Functional Characteristics:

1. All Silicon Solid state control circuits No relays, Virtually no warm up ti, e , very high reliability.
2. Minimal overshoot or hunting.
3. Dc Motor driver/AC motor
4. Zero waveform distortion
5. Independent of supply frequency variations in the range 47 to 53 Hz.
6. Unaffected by load Power factor
7. Very high transient overload capacity.
8. Direct drive mechanism offer a better average correction speed(>30 V/Sec)
9. Built in Undervolatge / Overvoltage trip
10. Auto manual Mode operation.

Our Tubular Ultra Low Maintenance Battery is made using the special technology by which the active material is encapsulated in polyester tubes to prevent 'Shedding'. The electrode geometry facilities 'cyclic' deep discharges i.e. long repetitive power outages. They are recommended for back up power for UPS & Inverters where environmental conditions are tough and high ambient temperatures are common. Tubat Tobular proved to be most reliable source of back up power for Inverters and UPS operating under demanding conditions. These are capable of long hours of backup.

Applications - Stored Power For

• UPS [Un-Interrupted Power Supply
• Communication Equipments
• Solar Power Systems
• Lighting
• Domestic
• Industrial
• Inverter
• Wind Mills
• And Other Stationery Applications

Salient Features

• Steady Output
• Aquatrap Ventplug Ensures
• Low Maintenance
• No Acid Fumes
• Eco Friendly
• Low Antimony Allow
• Large Top-Of-Plate Acid Head Room
• Quick Recovery From Deep Discharge
• Extra Backup Time

Technical Specifications : Tubular Regular Series (Voltage (C10)- Size - mm (LxWxH) 5mm)

• 12V 120 AH - 440x185x415
• 12V 150 AH - 440x185x415
• 12V 180 AH - 440x185x415
• 12V 200 AH - 440x185x415
• 12V 220 AH - 440x185x415
• 12V 240 AH - 440x185x415

Initial Charging Instructions

• Filling Gravity: 1.230 0.005 @ 27C
• Rest Period : 12
• hours Charging Current: 0.10C Amps
• Charging Duration: 48 hours (MINIMUM)
• Final Gravity : 1.240 1.250 @ 27C

Normal Charging Instructions

• (After a capacity discharge) Normal charging rate: 0.1 OC Amps Condition for fully charged state: (For both a & b)
• Charge till constancy in voltage and specify gravity reading for 3 consecutive hours and free gassing in all the cells

Maintenance Instructions

• Recharge battery after prolonged use. Keep battery top and terminal clean & dry Ensure good ventilation in the room
• Toping with distilled water 2 to 3 times a year Wooden or plastic (No conductivity) planks should be used for placing the battery

Transformer Based UNIQUE Pure Sine Wave UPS with AVR:

UNIQUE LPS series UPS integrated with latest on-line and communication technology, giving a perfect power solution for your restrict requirements. CPU control and PWM technology, making our UPS a reliable pure sine wave power hub, suitable for all type of inductive/ resistive or complex loading. Higher efficiency and better protection , you can control the UPS by computer interface or SNMP adaptor.And more important is LPS series UPS has AVR inside which works in wider input range and with higher precision.

CPU control :CPU control, built-in intelligent software offers high precision output.

PWM technology, Pure Sine Wave output : Pure sine wave output, suitable for all types of loading includes resistive load, inductive load, complex load

Sensitive short circuit protection : When short circuit happens, UPS will shut down the inverter and giving warning.

Sensitive intelligent overload protection : On battery mode, overload Less than 120%, UPS will give warning (beeping) for 10 seconds, after 10 seconds, UPS will switch off inverter to avoid damage to the UPS; on Normal mode, overload will activate the beeping warning, to educate the user to reducing the load with in its rated capacity.

Optional LED or LCD Human-Machine Interface : Simplified LED display or advanced LCD display. For LCD display, input/output voltage and frequency, output current can be showed on the screen.

Shorter transfer time :

The Power Backup System is essentially meant for the Lifts installed in multi stored buildings, Offices, Mfg. Plant, Shopping Malls, Etc. This system ensures that the above applications continues to operate as if nothing happened even after the electricity failure. One doesnt need to rush to start the generators. The system is always alert and has the intelligence to sense Power Failure. This user friendly System is compact in size and are tailor made to particular sites. In the normal condition when the electricity is available, the LIFT ( Application ) is directly connected to the Main power and small portion of the Mains supply is used in charging the storage batteries. In the event of electricity failure the system instantaneously senses it and generates AC Power from the batteries.

The power backup system is essentially meant for the lifts installed in multi stored buildings, offices, Mfg. Plants, Shopping Malls, Etc. This system ensures that the above applications continue to operate as if nothing happened even after the electricity failure. One doesnt need to rush to start the generators. the system is always alert and has the intelligence to sense power failure. This user friendly systems are compact in size and are tailor made to particular sites.

Power Backup System:

LIFTS, Shopping Malls Lightings, Air conditioners, Process Industries, 3 Motors, Pumps.

The Power Backup System is essentially meant for the Lifts installed in multi stored buildings, Offices, Mfg. Plant, Shopping Malls, Etc. This system ensures that the above applications continues to operate as if nothing happened even after the electricity failure. One doesnt need to rush to start the generators. The system is always alert and has the intelligence to sense Power Failure. This user friendly System is compact in size and are tailor made to particular sites

System Operation :

In the normal condition when the electricity is available, the LIFT ( Application ) is directly connected to the Main power and small portion of the Mains supply is used in charging the storage batteries. In the event of electricity failure the system instantaneously senses it and generates AC Power from the batteries. All theses activities are carried out with few seconds thus ensuring that the Applications remains without power only for few seconds. When the Main supply resumes the Applications are automatically switched over to it and a small portion of it is again utilized for charging of the batteries. This cycle is repeated again during the next power failure.

These Systems are available in various models and different capacities to suite all available Lifts & Other Various Capacities of Applications. The System is specially designed unit. The battery bank has the capacity to take care of power failure for fairly long time upto 8 to 10 hrs. The common lighting load such as Staircase, Parking an also be connected on the same system. In case of a multi building complex options can be considered for providing single unit for number of lifts etc. on prior site checking for Lift Application.

Line Interactive Standared Backup UPS:

Unique launches a high performance single card sinewave UPS that will work even in the remotest corner of India without maintenance headache.

The system output is a true Sine wave that is phase synchronous to the input. When the main fails, the transfer time can be from no break up to 10ms depending on the phase synchronization and the rate of mains decay.

During Mains Availability a high performance 6 stages AVR has been incorporated to give a regulated output for mains input of 120 V to 280 V. A high performance low ripple charger gives faster charging and longer battery life. Charging currents of up to 15 amps can be programmed.

KEY FEATURES OF THE SYSTEMS:

• Pure sinewave output
• Wide input range with 6 step AVR.
• 5 stage charger system that ensures faster charging and lower battery heating
• Phase synchronized transfer.
• Ultra fast transfer routine.
• Zero current relay switching for better relay life.
• Zero battery drain in off mode.
• Auto recharge and night guard on mains recovery.
• Fully programmable all set points, and parameters can be programmed by you
• Highly fault tolerant system.
• Computer communication enabled , real time data transfer to a host computer through s232c.(optional)