Our Los Angeles Abrasion Testing Machine is for determination of resistance to wear of coarse aggregate. We design Los Angeles Abrasion Testing Machine with precision, and has unique construction of rolled steel drum totally closed except for removable dust-tight cover. Los Angeles Abrasion Testing Machine is connected to stub shaft and mounted on steel frame to allow rotation about its axis in a horizontal plane. We manufacture them keeping in mind the varied uses of our clients.

• The drum is rotated by one h.p. electric motor
• Supplied with 12 abrasive charges of 48 mm diameter
• Revolution Counter fitted to rotating shaft
• A heavy duty speed reducer coverts the motor speed to required drum speed of 30 to 33 R.P.M.
• Inside the drum is provided a steel shelf which can be easily replaced when worm out due to repeated abrasion tests

• High performance speed
• Easy operational features
• High efficiency
• High speed

We bring forth highly efficient Compression Testing Machine that embodies a hydraulic system designed to meet the requirement of IS 516-1959. It is designed for doing compression tests on concrete cubes up to 15cm X 15cm X 15cm and also concrete cylinders up to 30cm height. We design our Compression Testing Machine using high quality components, which provide them long service life. Compression Testing Machine manufactured by our company has many profitable features, which make it highly demandable for various industrial and laboratory activities. Loading UnitThe hydraulic jack is fixed to base. The upper platen has got a self-aligning action and is attached to a screw which passes through the cross-head plate, and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen. A dust cover is provided on the jack to prevent any dust from going into the cylinder. A spacer with a centering locating pin is provided to test small specimens. The lower and upper platens of the machine are hardened, ground and polished. Guidelines are marked on the lower platen to keep the specimen coaxial with the hydraulic jack. Pumping UnitThe motorized pumping unit, which is housed in an elegant console is of double plunger type and is driven by a single phase 220 Volts 50 cycles electric motor. The pumping unit is a separate unit connected to the jack by means of a rubber hose pipe. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with a 20cm diametermeter diameterl hydraulic pressure gauge calibrated by N.C.B.M. A max red pointer is provided to facilitate taking readings after failure of the specimen. The pressure gauge is fixed at an angle for easy readability. The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is equipped with facilities for hand pumping in case of power failure. The electric pumping unit is fixed with a micro-switch to switch-off the motor automatically as the load on the machine approaches the rated capacity. Relays are incorporated in the pumping unit so that in case of breakdown of power supply, the motor will stop and will not re-start unless the starting switch is operated.

• Aesthetically designed front panel with membrane switches.
• Separate displays for load indication and maximum range.
• Peak/Normal mode selectable.
• Configuration lock at rear to prevent tampering with range.

• Range : 1KN to 9999.
• Load : 1KN to Range
• Set Load (limit) : 1KN to 9999
• Accuracy : 0.1% of full scale 1 digit
• Capacities available : 10 tonnes, 25 tonnes, 50 tonnes, 100 tonnes, 200 tonnes.

Our Los Angeles Abrasion Testing Machine is for determination of resistance to wear of coarse aggregate. We design Los Angeles Abrasion Testing Machine with precision, and has unique construction of rolled steel drum totally closed except for removable dust-tight cover. Los Angeles Abrasion Testing Machine is connected to stub shaft and mounted on steel frame to allow rotation about its axis in a horizontal plane. We manufacture them keeping in mind the varied uses of our clients.

• The drum is rotated by one h.p. electric motor
• Supplied with 12 abrasive charges of 48 mm diameter
• Revolution Counter fitted to rotating shaft
• A heavy duty speed reducer coverts the motor speed to required drum speed of 30 to 33 R.P.M.
• Inside the drum is provided a steel shelf which can be easily replaced when worm out due to repeated abrasion tests

• High performance speed
• Easy operational features
• High efficiency
• High speed

We bring forth highly efficient Compression Testing Machine that embodies a hydraulic system designed to meet the requirement of IS 516-1959. It is designed for doing compression tests on concrete cubes up to 15cm X 15cm X 15cm and also concrete cylinders up to 30cm height. We design our Compression Testing Machine using high quality components, which provide them long service life. Compression Testing Machine manufactured by our company has many profitable features, which make it highly demandable for various industrial and laboratory activities. Loading UnitThe hydraulic jack is fixed to base. The upper platen has got a self-aligning action and is attached to a screw which passes through the cross-head plate, and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen. A dust cover is provided on the jack to prevent any dust from going into the cylinder. A spacer with a centering locating pin is provided to test small specimens. The lower and upper platens of the machine are hardened, ground and polished. Guidelines are marked on the lower platen to keep the specimen coaxial with the hydraulic jack. Pumping UnitThe motorized pumping unit, which is housed in an elegant console is of double plunger type and is driven by a single phase 220 Volts 50 cycles electric motor. The pumping unit is a separate unit connected to the jack by means of a rubber hose pipe. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with a 20cm diametermeter diameterl hydraulic pressure gauge calibrated by N.C.B.M. A max red pointer is provided to facilitate taking readings after failure of the specimen. The pressure gauge is fixed at an angle for easy readability. The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is equipped with facilities for hand pumping in case of power failure. The electric pumping unit is fixed with a micro-switch to switch-off the motor automatically as the load on the machine approaches the rated capacity. Relays are incorporated in the pumping unit so that in case of breakdown of power supply, the motor will stop and will not re-start unless the starting switch is operated.

• Aesthetically designed front panel with membrane switches.
• Separate displays for load indication and maximum range.
• Peak/Normal mode selectable.
• Configuration lock at rear to prevent tampering with range.

• Range : 1KN to 9999.
• Load : 1KN to Range
• Set Load (limit) : 1KN to 9999
• Accuracy : 0.1% of full scale 1 digit
• Capacities available : 10 tonnes, 25 tonnes, 50 tonnes, 100 tonnes, 200 tonnes.