Main Engine Cylinder Coveris the housing which sits on the Top of the cylinder liner (thereby terming its name as the Cylinder Head as well). It is usually made of cast iron and comprises the Air starting Valve, Injectors and Air relief Valve mechanism. The Cylinder Cover Acts as a Supplier of Fuel to the Piston& Cylinder Liner chamber thereby creating the pressure to blast the Engine with power to move. The Cylinder Cover normally takes the beating due to the high pressure in the Engine and develops thermal cracks.
Thus we procure Cylinder Covers from the Ships coming to the Ship Recycling Yard after careful examination of its cracks if any. Once found ok, these Cylinder covers are Pressure tested to check for leakages in its cooling pockets. After that we service the complete Cylinder Cover and make it ready for further supply on ships.

Make : SULZER
Type : RTA 58, RTA 62, RLB 56, RLB 66, RLA 90, RND 68, RND 68M, RND 76M, RND90,

Make : MAN B&W
Type : L 60 MC, S 60 MC, L80 MC, K45GF, K74EF, K62EF, L 67GFCA, K84 EF,

Make : KAWASAKI M.A.N
Type : V 40/54, KSZ 70/120E, KSZ 70/125A, KSZ 70/125BL, KSZ 78/155E, 57/80C

Make : PIELSTICK
Type : PC2V, PC2-2V, PC2-5V, PC3V, PC4V

The Main Engine Spare Partsforms the cylindrical space in which the piston operates. The liner is manufactured using a superior material of Cast Iron. Considering that the piston which operates in the Liner & the friction caused thereof, wears down the Cylinder Liner gradually. However these Liners are sometimes less worn and can be re-used on the Engines on board sea-Going vessels. These Second hand Cylinder Liners are comparatively cheaper & since they are original i.e. of the Manufacturers or OEMs, they are preferred by several Shipping Lines for their Fleet as an economical and reliable option as compared to buying new spares from the makers directly.These Cylinder Liners are procured by us from the Ships which come to the Ship Recycling Yard and are carefully checked, MPI tests done, Calibrated and then offered to the clients.

Make : SULZER
Type : RTA 58, RTA 62, RLB 56, RLB 66, RLA 90, RND 68, RND 68M, RND 76M, RND90,

Make : MAN B&W
Type : L 60 MC, S 60 MC, L80 MC, K45GF, K74EF, K62EF, L 67GFCA, K84 EF,

Make : KAWASAKI M.A.N
Type : V 40/54, KSZ 70/120E, KSZ 70/125A, KSZ 70/125BL, KSZ 78/155E, 57/80C

Make : PIELSTICK
Type : PC2V, PC2-2V, PC2-5V, PC3V, PC4V

The Main Engine & Aux Engine Spare Parts (commoly known as Crank) is an Engine part that performs the reciprocating rotational motion which in turn moves the connecting rods and pistons in the Cylindrical Liners of the Engine. The Motion of the Crankshaft wears down the bearings located between the crank-pins and the Connecting rods (big-end bearings). We purchase these Crankshafts from the Ship recycling yards after careful examination (such as the MPI, NDT, UV & Callibration) to check whether the crankshaft is in good condition for re-use. These Second hand Crankshafts are comparatively cheaper & since they are original i.e. of the Manufacturers or OEMs, they are preferred by several Shipping Lines for their Fleet as an economical and reliable option as compared to buying new spares from the makers directly.

Make : YANMAR
Type : MAL-DT, UAL-ST, 6M-200, 6M-220, 6S185L, 6S165L, 6RAL

Make : DAIHATSU
Type : 6DS-22, 6PS-26D, 8PS-26D, 6PS-26H, 6DL-20, 6DL-22, 6DL-24. 6DL-26, 6DK-20

Make : WARTSILA
Type : 4R-32E

Compressor is one such Machine which is used for several purposes on a ship. As the main aim of the Air compressor, as its name suggests, is to compress air. The Main Engine AIR COMPRESSOR is used to start the Main Engine or Auxilliary Engine of the Ship by giving it a jolt of compressed Air to get the Pistons in the Cylinder Liners moving. They supply Air between the range of 25 to 30 bar.
Deck air compressor is used for deck as service air compressor and have a separate air bottle. These are lower capacity compressors which supply air in between the range of 6 to 8 bar.
Presently we purchase these Compressors which are in good / working condition from Ships coming to the Ship Recycling Yard, . These Air Compressors or Chilling Compressors are totally stripped down and worn out parts are replaced with new genuine spares & after cleaning and painting, the compressors are boxed up again and tested for ready use & commissioning on Ship.
We have available in stock the compressors of the following Makes :-

Main Air Compressors
Make : HAMWORTHY, HATLAPA, YANMAR, TANABE, SPERRE, SUCTION GAS Co,

Chilling Compressors
Make : SABROE, BITZER, CARRIER, DAIKIN,

Turbo-charger is a turbine driven Machine that increases the internal combustion & Engines efficiency & power by forcing outside extra air into the chamber where the combustion takes place. This turbocharger is powered by the turbine rotor that is driven by the exhaust gas that emits from the Main or Auxilliary Engine. The turbocharger compressor draws in the air, compresses it before it enters the Engines inlet manifold. It assists in improving the Engine power.

Since the turbocharger rotates at a very high speed from anywhere between 25000 50000 rpm, the Rotor has to be well balanced.

Presently we purchase these Trubochargers which are in good / working condition from Ships coming to the Ship Recycling Yard, . These second hand Turbochargers are then totally stripped and the Bearings, Bushings are replaced and the inner condition of the Inlet & outlet casings of the turbocharger are thoroughly checked before re-packing the same so that we can supply our clients in best possible condition for immediate commissioning of the turbochargers on the Engines. Also we have available Spare parts of these Turbochargers such as New & S/hand inlet & Outlet Casings, New Bearings, Bushings, etc.

Make : BBC / ABB
Type : VTR 160 / 161 , VTR 200 / 201, VTR 250 / 251 , VTR 400 / 401, VTR 501

Make : BBC / ABB
Type : VTR 454 , VTR 564

The Hydraulic Motors and Hydraulic Pumps are machines employed on board the Ships Deck Cranes and Winches. These Hydraulic Motors & hydraulic Pumps assists the crane hoisting, luffing and slewing motions. The Motors convert hydraulic pressure and flow into torque and angular displacement These High pressure motors & pumps come as Gear/vane & Radial Piston motors. They need to be accurately working with no foreign particles in its mechanism as the cranes & winches bear loads of upto 50 tons & above.
We procure these Motors and Hydraulic Pumps from the Ships coming to the Ship Recycling Yard, after careful inspection. These machines are then totally stripped down and worn out parts replaced with new spares & after cleaning, servicing , Painting, the hydraulicS are boxed up for ready use & commissioning on Ships cranes & winches .
We have available in stock Hydraulic Pumps & hydraulic Motors of the following Makes :-

Make : FUKUSHIMA / BRAATVAAG
Type : MA 10B, MA 10C, MA 8, G 420, FG-16, DG-17, M6300C, M6300B,

Make : KAWASAKI
Type : SX 510 AM, SX 510 BM, SX 508, BZ 732, BV 732,

Make : I.H.I
Type : HVL-A, HVL-DSS, HVK-A, HVN, HKA, HLA, 6P67K, 66P series,

Make : HYDRAMATIK
Type : A2V225, A4V125, A2F45, A2F225, A2V28, A2SF100,

Make : NORWINCH
Type : M-140, PH-11, PH-4,

Ship or Marine Radars are equipments that assist the bridge navigation systems to inform the ships crew of any other vessels or land in certain range of the ship. These are very important Ship navigation aids. These Radars are either ARPA (Automatic Radar Plotting Aid ) or Non-ARPA & in X Band or S Band. The Radar picks signals from near & far objects.
We procure these Radars from the Ships coming for scrap in the Ship Recycling Yard. The Radars are then checked to be in working condition with all functions and then carefully stored for supply to our clients. The radars comprise the complete set including the Screen/ Display, Processor unit, Transceiver unit and complete cables.
We have available in stock Ship Radars of the following Makes :-

Make : FURUNO
Type : FAR 2817, FAR 2827, FAR 2837S, FAR 2825, FAR 2835S, FR 2115, FR 2125, FR 1510 mk3,

Make : Japan Radio Corp (JRC)
Type : JMA 9922, JMA 9932, JMA 9122, JMA 9110, JMA 9132S, JMA 6252

Make : KELVIN HUGHES
Type : 2300 MANTA, MANTA DIGITAL, KH 6000A, KH 5000,

Make : CONSILIUM SELESMAR
Type : ST 340, T 340

Marine or Ship Gyro Compass are equipments that assist the bridge navigation systems & inform the ships crew about the direction in which they are heading of North, South, East & West. These compass indicate the exact degree of heading. They are coupled with Repeaters on either sides of the bridge as well which follow the gyro compass heading.
We procure these Compass from the Ships coming for scrap in the Ship Recycling Yard. The Compasses are then checked to be in working condition with all functions and then carefully stored for supply to our clients.
We have available in stock Ship Compass of the following Makes :-

Make : ANSCHUTZ
Type : STANDARD 20, STANDARD 22, STANDARD 6
Make : SPERRY
Type : NAVIGAT X mk1, NAVIGAT X mk2, MK 37 Mod 1, MK 37 Mod D, Mk 37 Mod D/E, SR 220