Valves & Valve Fittings #3350203

Design & Manufacturing Std.Pressure & Temp RatingFace to Face & End to End DimensionsFlange EndsButt Weld EndsTestingFire SafeISO Top Mounting :::::::: API 6D /ISO 17292 / ASME B 16.34 / IBR / CEASME B 16.34ASME B 16.10ASME B 16.5ASME B 16.25EN 12266-1 (BS-6755-1) / API 598API 607 / API 6FA ISO 5211

General design and manufacturingValve face to face dimensions Top flange drilling Valve inspection and testingFlange standard :: ::: API 609 category A / EN 593API 609 category A / EN 593 short wafer as per ISO 5752 Tab 5ISO 5211API 598 / EN 12261 Part 1Class 150, DIN EN 1092 - PN 6 / PN 10 / PN 16, JIS5K / 10K / 16KBS 10 Tab D & E, IS 6392 Table 11 / 17 1. Valve type : Centric Disc Rubber Lined Butterfly valve with a single piece body. 2. Body type : Short wafer3. Seat type : Bonded seat4. End connection : Wafer sandwiched5. Size range : DN 40 to DN 2006. Pressure rating : *ASME Class 150 (max)7. Operating temperature range : -250 C to 1200 C (depending on MOC)8. Seat leakage : Tight shut off (Bidirectional)9. Operation : Handlever for sizes from DN 40 to DN 200Worm gear boxes for sizes from DN 40 to DN 200 Pneumatic / Electric actuator operation-optional10. Standard Material of Construction (MOC) Valve Body : SGI / WCB / CF8MValve Disc : SGI / WCB / CF8MSeat : EPDM / NitrileDrive end & non drive end shafts : 17.4 PH

DesignPr. & Temp RatingFace to Face & End to End DimensionsFlange EndsButt Weld EndsTesting & Inspection :::::: ASME B16.34 / BS 1868ANSI B16.34ANSI B16.10 (upto 24")ASME B16.5ASME B16.25API 598 / EN 12266 PART 1 (BS 6755 PART 1) API TRIM NO. & SEAT HARDFACINGAPI 602Trim No. Nominal Trim Material Type Body Seating Surface Wedge Seating Surface Back Seat1 F6 13% Cr Steel 13% Cr4 Hard F6 Hardfaced with 13% Cr Steel Hardfaced with 13% Cr5 Hardfaced Hardfaced with Co-Cr-W Alloy Hardfaced with Stellite 68 F6 & Hardfaced 13% Cr Steel & Hardfaced with Co-Cr-W Alloy Stellite 6 13% Cr Stellite 6 / 13% Cr Recommended Body/Bonnet & Trim Material For High Temperature Services (Water/Steam)Temperature Body / Bonnet Materials API Trim No.Up to 800 0F (427 0C) A 216Gr. WCB, A 217 Gr. WC6, A 217 Gr. WC9 1, 4, 5, 8Above 800 0F (427 0C)& Up to 1000 0F (540 0C) A 217 Gr. WC6, A 217 Gr. WC9 5 & 8Above 1000 0F (540 0C) A 217 Gr. WC6, A 217 Gr. WC9 5

IV8F Ball Valve:

Key Features

• 3-piece Ball Valves / 2-way
• 3-Piece swing-Out Design, Easy In-line Maintenance.
• ISO 5211 Mounting Pad Allows for mounting of actuator.
• Maintenance free live loaded double sealing stem packing ensures high
• cycles life and positive sealing.
• Blow-Out Proof Stem.

 

IV6F, IV6T Ball ValvesKey Features

• 2/3-Piece Ball Valves/ 2-way
• Maintenance free live loaded double sealing stem packing ensures high cycles life and positive sealing.
• ISO 5211 Mounting Pad Allows for mounting of actuator.
• Blow-Out Proof Stem.

 

IV9F, IV9T Ball Valves

Key Features

• 2/3-Piece Ball Valves / 2-WAY
• Maintenance free live loaded double sealing stem packing ensures high cycles life and positive sealing.
• ISO 5211 Mounting Pad Allows for mounting of actuator.
• Blow-Out Proof Stem.

 

IV6F, IV6T Ball Valves

Key Features

• 2/3-Piece Ball Valves/ 2-way
• Maintenance free live loaded double sealing stem packing ensures high cycles life and positive sealing.
• ISO 5211 Mounting Pad Allows for mounting of actuator.
• Blow-Out Proof Stem.

 

IV9F, IV9T Ball Valves
Key Features

• 2/3-PIECE BALL VALVES / 2-WAY
• Maintenance free live loaded double sealing stem packing ensures high cycles life and positive sealing.
• ISO 5211 Mounting Pad Allows for mounting of actuator.
• Blow-Out Proof Stem.

 

IVC1F, IVC3F, IVC8F Ball Valves
Key Features

• 2/3-PIECE, 2-WAY / 3-WAY, BALL VALVES
• ISO 5211 Mounting Pad Allows for mounting of actuator.
• Maintenance free live loaded double sealing stem packing ensures high cycles life and positive sealing.
• Blow-Out Proof Stem.

 

IVT1F, IVT3F, IVT8F Ball ValvesKey Features

• 2/3-PIECE, 3-WAY, BALL VALVES
• ISO 5211 Mounting Pad Allows for mounting of actuator.
• Maintenance free live loaded double sealing stem packing ensures high cycles life and positive sealing.
• Blow-Out Proof Stem.

 

IVFBV Floating Ball Valves

• The IV range of floating valve incorporates unique design features to provide a rugged construction, reliable operation and long service life. It is suitable for normal to most demanding applications covering wide segment of process industries such as chemical, petrochemical, pharma, steel, alumina,   power plants and common utilities.  An ideal valve for the flow isolation and ON / OFF duty.      
• IV Ball valves come with double body & stem seal to ensure reliable sealing. Valves can be provided with special features like, Locking arrangement, Special cleaning for oxygen service, Extended stem /  bonnet, Vacuum service, Jacketing, Fire safe construction etc.
• Valves can be provided with Gear box / Pneumatic actuator / Electric actuator wherever required.

 

IVTMBV Ball Valves

• The IV range of Trunion Mounted Ball Valve incorporates unique design features to provide a rugged construction, reliable operation and long service life. It is suitable for normal to most demanding applications covering wide segment of process industries such as Oil & Gas, Chemical, Petrochemical, Pharma, Steel, Alumina,   Power plants and Common utilities.  An ideal valve for the flow isolation and ON / OFF duty.
• All Trunion mounted Ball valves come with double body & multiple stem seal to ensure reliable sealing. Valves can be provided with special features like, Extended stem /  Bonnet Drain & Vent arrangement, Emergency sealant injection, Fire safe construction etc.
• Valves can be provided with Gear box / Pneumatic actuator / Electric actuator wherever required.