Urea is acclaimed for its pure and effective composition. We offer this chemical in different grades and specifications to meet the diverse requirements of clients. This chemical is comprehensively used in oil industry, laboratories, pharmaceutical, agriculture, cattle & poultry feed, fertilizer & electroplating industries for their perfect texture and precise composition. Offered at competitive prices, it is a stable compound and is packed using tamper proof material. It is extensively used in oil industry for water treatment.
Chrome free lignosulfonate compound is specially formulated to act as a deflocculant in virtually all waterbase mud systems. Chrome free lignosulfonate additive reduces and stabilizes viscosity and assists in reducing fluid loss.
Attapulgite clay that exceeds API Specification 13A Section 12 viscosity requirements. It is used to provide viscosity and hole cleaning capabilities in drilling fluids with high concentrations of salts. It is very effective in fluids containing high concentrations of divalent ions such as calcium or magnesium.
Drilling Detergent is an aqueous blend of surface-active agents. It is designed to reduce the surface tension of all water-base mud systems and reduce the sticking tendency of water-sensitive shale cuttings.
Ammonium Bisulphite Solution is used as an Oxygen Scavenger to arrest oxygen in Water and especially in Sea Water.Oxygen Scavenger is a perfect blending of an active Ammonium bisulphite solution and inorganic chemicals
Red Iron Oxide, Ferric Oxide, Fe2O3, Iron (III) Oxide, Jewelers rouge, Iron Sesquioxide, Anhydrous Iron Oxide, CAS 1309-37-1, Red Ochre, MIL-I-706A, Specular Iron, English red, Mars red, Red Iron Trioxide, Indian red.
It is highly responsive to the action of light, heat, electricity, water and other chemicals. It transmits and reflects light to produce decorative effects and also prevents penetration of SUN Rays, moisture, heat, gases etc. On the surface on which it is coated. It produces stiffening effect of calendared sheets.
Drilling Detergent is an aqueous blend of surface-active agents. It is designed to reduce the surface tension of all water-base mud systems and reduce the sticking tendency of water-sensitive shale cuttings.
TEG is commonly used for dewatering applications due to their ability to absorb water (hygroscopic liquid) and commonly used to remove water from gas streams, which significantly reduces the risk of hydrate formation. In addition glycol can be used to remove existing hydrate deposits within a system.
POLYSULPHIDE SEALANT is a one component, gun applied, synthetic rubber based sealant which cures by absorption of atmospheric moisture to form a permanently flexible seal. It is suitable for use within the construction industry on all joints where above average repeated movement is encountered over a wide temperature range. It provides outstanding resistance to weathering and chemical attack from solvent, alkalis, dilute acids, oils and grease. ltra low (UL) additive that generates less viscosity than regularviscosity products. POLYSULPHIDE SEALANT cures relatively slowly, therefore applications must be restricted to those where little movement will occur before full cure has been achieved. This will apply particularly where joints could be subject to foot or wheeled traffic and hydrostatic pressure.
The waxes present in most crude oils include n-alkanes, iso-alkanes, alkyl cyclic compounds and alkyl aromatics. In most crude n-Alkanes are the predominant species. The amount and distribution of these n-Alkanes is crude specific. Short-branched chains are the next most common. These have a significant impact on wax deposition characteristics.The wax appearance temperature (WAT) is the temperature at which, on a cooling cycle, the crude oil first precipitates solid wax. This is arguably the single most important characteristic in examining wax deposition potential in crude oil. The deposition of wax leads to several problems in reduced production and impaired flow assurance. Severe deposition can lead to loss of production and pipeline blockage etc.
Ammonium Thiocyanate is used for carrying out tracer study in oil & gas fields.The material shall be in the form of colour less deliquescent crystals, free from visible impurities. Assay as NH4SCN, percent by mass: 97 (Minimum)Material in Distilled Water: 4.5 - 6.0Chloride as NH4Cl, percent by mass: 0.1 (Maximum)
Soda is hygroscopic. When stored for longer periods CO and water may be absorbed depending on ambient conditions (increase in weight of up to 17 %).In aqueous solution soda is strongly alkaline. When anhydrous soda is dissolved heat is liberated. In contrast, when a concentrated solution of soda is diluted with water heat is taken up and the solution cools down.
MICRONIZED CELLULOSE FIBRE lost circulation material is a natural cellulose fiber that can be used in pills, sweeps and maintenance treatments with minimal adverse effect on rheology and filtration control properties. The cellulosic material helps decrease the permeability of the wallcake in all drilling fluid types. MICRONIZED CELLULOSE FIBRE lost circulation material additions do not interfere with pumping equipment or downhole tools when used in the proper concentration ranges. These materials are compatible with water and non-aqueous based fluids.
Caustic soda flakes is obtained from sodium hydroxide - technical grade, by electrolytic process. It is a solid white, hygroscopic, odorless substance. Caustic soda flakes easily dissolves in water, with heat release. The product is soluble in methyl and ethyl alcohols.
Caustic soda flakes is obtained from sodium hydroxide - technical grade, by electrolytic process. It is a solid white, hygroscopic, odorless substance. Caustic soda flakes easily dissolves in water, with heat release. The product is soluble in methyl and ethyl alcohols.Sodium hydroxide is a strong electrolyte (completely ionized both in crystalline and solution states). Sodium hydroxide is not volatile, but it rises easily in air as aerosols. It is insoluble in ethyl ether.
PREGELATINIZED CORN STARCH is a high-quality polysaccharide used to provide filtration control in all types of water-base drilling fluids. This non-ionic natural polymer is effective in all make-up waters, including high-salinity and high-hardness brines.
Extreme Pressure Lubricant modified tall oil fatty acid can be used to impart extreme pressure lubricating properties to drilling fluids Extreme Pressure Lubricant lubricant readily adsorbs on exposed surfaces, providing a physical coating that is effective in reducing metal-to-metal friction.
Hydrated LIME and slaked LIME are all common names for calcium hydroxide [Ca(OH)2]. It is used as a source of calcium and alkalinity in both water- and oil-base drilling fluids. Hydrated LI ME, a widely available commercial chemical, is an economical source of calcium (Ca2+) and hydroxyl ions (OH). Drilling fluid applications for LIME include: increasing pH; providing excess LIME as an alkalinity buffer; flocculating bentonite muds; removing soluble carbonate (CO32) ions; controlling corrosion; and activating fatty-acid, oil-base mud additives.
NUT PLUG cellulose is ground walnut or pecan hulls. It is used for the treatment of lost circulation. NUT PLUG material is available in fine, medium and coarse particle sizes, and may be used in all types and densities of fluid systems. NUT PLUG material may be used as a granulartype lubricant to reduce torque and drag.