Fluid Kinetics Div. Of Valco Cincinnati

When assembling roof panels, headliners are often held in place by spraying or coating adhesives, including hot melts and cold glues. Sunroofs also require hot melt or sealants that require automated and manual dispensing equipment. To see if we have what you are looking for, simply contact us today.

In Gasket Manufacturing, gasketing and similar silicone materials are often extruded in a bead form directly onto automotive components such as engine parts, window gaskets, door gaskets, etc. Valco Melton offers a selection of dispensing equipment and systems to support your specific application needs. To find out more, contact us today.

Valco Melton offers contact and non-contact gluing systems for a variety of Envelope Manufacturing applications. An array of electronic gumming systems allow companies to set up gluing patterns on an accurate touch screen control, apply the adhesive using high speed valves and inspect the gum positioning, volume and length with optical glue sensors. Proper adhesive application of the side seam gumming is a critical factor in producing envelopes of good quality. Achieve superior adhesive application with Valco Melton's proven 400 and 524 Series Valves. Designed with the latest in high-speed Valve technology, Valco Melton's applicators deliver high-speed performance with accurate adhesive placement and superior control of glue patterns. Valco Melton's low-cost Compact ProductionPlus® Envelope Conversion Kits offer big performance in a small package. The system features the MCP-4C Adhesive System Pattern Control and Valco Melton's 300 Series electric Valve with adjustable stroke feature. We have experience with a large number of applications from over 60 years of experience in the gluing industry. If you do not see the manufacturing application you need listed below, find out if we have the solution you are looking for by contacting us today.

In the Automotive Industry, many automotive applications require hot melt or cold adhesive spray and extrusion technology mounted on an automated line (robotconveyor) or applied manually. Adhesive and sealant applications including electronic applications, fixture and plastic trim attachment are common, but there are numerous other applications for adhesive and sealants in automotive component manufacturing. Insulation Manufacturing often involves acoustic (sound deadening) insulation, vibration absorption and heat insulation for door panels, dashboards, gate lifts, etc, which often require the application of hotmelt pressure sensitive (PSA) adhesives and polyurethane reactive hot melts to hold the insulation in place. Generally, spray and extrusion are the preferred methods of application and often include automation such as robots and X-Y-Z tables. To find out how best we might be able to help you with your specific need, contact one of our specialists today.

Weather stripping and trim assembly applications, such as flocking, require hot melt and cold adhesives to be applied in either automated or manual applications. Adhesives used include pressure sensitive (PSA), polyurethane reactive (PUR) and cold water-based adhesives and may require metering devices to apply the materials. Let us know your specific needs by contacting us today.

Nonwoven materials are becoming widely used in hygiene product manufacturing industries such as in feminine hygiene product manufacturing, diaper and incontinence product manufacturing, as well as medical and surgical product manufacturing. Valco Melton’s complete non-woven system solutions and spare parts apply important market principles to produce a wide variety of patterns and widths for all hot melt adhesive applications associated with these industries. With ongoing efforts in research and development, we take our technology seriously. Each solution has been carefully designed for the high performance and extreme precision required during this delicate manufacturing process. Our equipment solutions include an extensive range of applicators for the construction of sanitary products such as baby diapers, feminine towels, tissues and other hygienic products. These products have been specifically engineered to reduce adhesive costs and improve product quality for lamination, elastic attachment and tape coating. Multiple-pump configurations are available for complex applications. Positive-displacement gear pumps provide constant, uniform adhesive output and include variable-speed motors and drive ratios matched to each specific application. Gear pump units feature several relief valve options, ranging from the simple single-stage relief valve to sophisticated pneumatic relief systems. Piston pump units are also available. To determine which product solution is right for you, contact one of our nonwoven engineer specialists today.

Door Panel Assembly involves adhering sound deadening acoustic foam, shoddy material or insulation to the inside of a door panel with hot melt swirl spray or extrusion beads. Adhesives commonly used in door panel assembly include Pressure Sensitive (PSA) and Polyurethane Reactive (PUR). Valco Melton provides a wide selection of equipment to retrofit your application. To learn more about what we can do for you, contact us today.

Packaging machinery for adhesive dispensing may include enclosing or protecting products for distribution storage, sales and use, with requirements as diverse as carton sealing, tray forming, palletizing or bottle labeling. Valco Melton is a world leader in packaging adhesive dispensing equipment and systems for both hot melt and cold glue applications. From simple hand gluing applicators to the complex micro-processor activated dotting valves, along with a variety of melt tanks, auto-feeders, pumping systems, bracket packages and controls, and compatible replacement parts, we offer a complete selection of equipment specifically designed to provide the flexibility your system requires. Valco Melton has developed complete "off-the-shelf" hot melt or cold glue conversion kits for most popular makes of machines. For a complete list, please inquire. Learn more by contacting us today.

Pinch bottom bags are either gusset or tube style, multi-wall paper bags that have a flap on the open end. A stable bottom is created when filling the bag. Pinch bottom bags are often selected for an attractive product display at the point of sale. Cold glue is applied to the bottom of the bag when a higher resistance to heavy weights and rough transportation conditions is needed. Hot melt is used to glue the bottom of the bag to enclose sift-proof type products by applying the hot melt adhesive in a multi-bead pattern. Hot melt creates a fast, strong bond at the time of application. To find out which solution is right for you, contact us today.

Valco Melton‘s FlexWrapp™ Coating Gun Series is designed for continuous applications that require frequent width changes with maximum precision to reduce adhesive usage. The FlexWrapp Laminating Series offers improved reliability and has been specifically engineered to meet the demanding needs of the woodworking environment. It is suitable to work with special adhesives and features an easy-to-use width regulation system, bilateral, independent and with just one operational side. As an additional option, the FlexWrapp Series is available with a roller bracket and position guide.

Weather stripping and trim assembly applications, such as flocking, require hot melt and cold adhesives to be applied in either automated or manual applications. Adhesives used include pressure sensitive (PSA), polyurethane reactive (PUR) and cold water-based adhesives and may require metering devices to apply the materials. Let us know your specific needs by contacting us today.