Lightning Protection Corp.

• Model NumberLPC 10643

Miniature wire pair protector (4-20 ma transmitter protector). 2 lines and ground. 0.50" X 0.68" X 1.25" H. AWG 16 insulated leads. Protection maximum 30 KA, 820 µs line to line and each line to ground. Connections across the lines and to ground at or inside the equipment enclosure. Response less than a nanosecond. After initial breakdown clamping voltage immediately drops to 30V an any surge up to 30 KA of current. Automatic restoration to the line voltage after the surge passes.

• Max. DC Voltage Rating14
• ModelLPC 10643

• Number Of Flowermodify an existing model new model

Designs lightning and surge arresters to suit a customer’s exact application. At no extra charge LPC can design a new model or modify an existing model SPD for AC power, DC power, RF coaxial, communications, signals, critical service, severe surge areas, and all other applications mentioned in our website. Coaxial cable connection surge arrester 1500 VDC, 100, 000 joules Nanosecond response 1, 200, 000 ampere on 820 µs wave

• Model NumberLPC 11895
• Max. DC Voltage Rating15

Two terminal type for bipolar protection between two points, e.g. plus to minus, or plus to ground, or minus to ground. Mounting legs are terminals on 2 38” centers. Also available with top screw terminals. The housing is insulating, 1.6” X 1.0” X 2.0” H.

• 50/60 Hz Voltage120V
• SERIESLPC 2010

AC POWER LIGHTNING AND SURGE PROTECTIVE DEVICES -- 1000 VRMS MAX, 5060 Hz LIGHTNING PROTECTION CORPORATION manufactures 300 models of standard, modified standard, specials, custom, and critical service AC Power SURGE PROTECTIVE DEVICES (SPD). Customer inquiry is invited for advice and recommendations on the proper model choice for the application. The minimum input required is the system voltage and your answers to our few questions will do the rest. Dash numbers are assigned according to customer inputs on details such as : enclosure type N12, N4, N4X; remote alarm relays; light, medium, heavy, and extra heavy duty; other requirements.

• Model NumberLPC 11895
• Max. DC Voltage Rating15

Three terminal type for bipolar protection between three points, e.g. plus to minus, plus to ground, minus to ground. Mounting legs are terminals on 2 38” centers. The center wire is for ground connection. Also available with top screw terminals. The housing is insulating, 1.6” X 1.0” X 2.0” H.

• Max. DC Voltage Rating18
• ModelLPC 11550

• Body0.310” dia. ceramic body, length from 0.250” to 0.500”.
• Surge capacity20 KA on 8/20 µs wave.
• PackageAvailable in 2 electrode and 3 electrode common chamber
• Wire terminations#20 or #18. PC board mount #18
• Breakdown Voltage75VDC to 1000VDC

LIGHTNING PROTECTION CORPORATION manufactures specialty gas-filled, non-radioactive, lightning and surge protective devices. These spark gap arresters come in a variety of surge current capabilities and physical dimensions, with two or three electrodes. The high temperature, ultra-pure electrodes are silver brazed to high alumina ceramics in vacuum and backfilled with inert gas mixtures. The entire cycle is automatically controlled by computer controlled equipment. Surge current ratings are available to 150 KA for 820 µs wave, to 10 KA for 101000 µs wave, and to 50 KA for 10350 µs wave. Breakdown voltage ratings range from 75 VDC minimum to 5000 VDC maximum. Applications include protection of electronics, electrical control, grounding, isolation, railroad, pipeline, military, and any other industrial application where gas tube spark gap device is applicable. Characteristics include bipolar and automatic operation. Device extinguishes on each current zero. Capacitance 0.5 to 5 pico farads. Resistance 10, 000 megohms in non-conducting state. In the arcing state a 15 to 25 volt drop occurs for one ampere to several thousand amperes.