Milspec Earth Anchors

• Impact Energy (Joules)34.9 J
• Impact Energy (ft.lbs.)25.7 ft.lbs.
• Blows Per Minute (variable speed)730 – 1,450 BPM

• Blows Per Minute680 BPM
• No Load Speed2,500 RPM
• Capacity (concrete)4-1/8″

Package of 10 Cable Clips for 18″ Wire Rope Allows for on site termination of cable Size: For 18″ Cable Material: Malleable Iron Coating: Galvanized Wrench Size: 316″ Apply Correctly – U bolt should be on end of Rope- Re- tighten after initial load

our Anchor Set- Storage Building or All Purpose Use A must for wind protection! 4 Anchor Set 12″ Shaft 30″ Long w4″ Helix. A must for wind protection! Easy to install by hand! Removable – Reuseable Set consists of: 4- 30″ Eye Anchors with 4″ Helix – Welded closed loop! Installl by hand or machine – both available under ”Installation tools”

Product Description Contractors Save BIG – Limited Supply! Ideal for Contractors needing to Anchor down installed Sheds etc.! Up to 2, 300 Lb pull out resistance for each Anchor! Lighter that other style Anchors- Save on *Shipping! 4” Ground Anchor Contractor Bulk Set Special- WITH DRIVE ROD! These arrowhead Ground Anchors are designed after our highly successful Mil-Spec anchors which have been proven and tested out in the field for over 40 years.

• Square Shaft:1 1/2 – 1 3/4″
• Helix Sizes:: 6″ – 16″ Larger Diameters Available
• Round shaft:2 7/8″ – 3 1/2″ Larger Diameters Available

Helical Piers come in different designs- Generally speaking: Round Shaft Helical Piers are used for “Compression” applications such as foundation repairs and supports for both Residential and Commercial applications in addition to new construction such as Walkways, Building supports, Light poles, Board Walks, Utility equipment etc. While Square Shaft Helical Piers are used for “Tension” Applications such as Tie Backs, Anchoring Applications, Guying Towers, Tilt Up construction etc.

• Capacity (concrete)4-1/8″
• No Load Speed (variable speed)235 – 480 RPM
• Blows Per Minute (variable speed)1,350 – 2,750 BPM