Russell Electric

INDUSTRYS MOST COMPREHENSIVE LINE OF UL TESTED 30-CYCLE-RATED AUTOMATIC TRANSFER SWITCHES Russelectric RTS Series automatic transfer switches are the most complete line of 480 VAC 30-cycle-rated and 3-cycle-rated UL tested switches available today. Russelectric RTS-30 30 Cycle-Rated Automatic Transfer Switches are available in the following versions: Open-Transition (& Dimensional Details)Closed-Transition (& Dimensional Details)TESTED, LISTED, AND LABELED BY UL UNDER UL-1008 A Before Underwriters Laboratories, Inc. will allow a transfer switch to be listed with a short circuit rating, it requires that the switch be able to close in on the same amount of fault current as it can withstand. All Russelectric RTS Series automatic transfer switches have been fully tested, listed, and labeled for 30-cycle and 3-cycle closing and withstand ratings (A) under UL-1008. In applications where extremely high short circuit current is available, fuse protection is mandatory. When coordinated with current limiting fuses, Russelectric RTS Series transfer switches have UL listed closing and withstand ratings of 200, 000 amperes. RPTCS ATS CONTROL SYSTEM The Russelectric RPTCS microprocessor automatic transfer control system controls all operational functions of the ATS. For complete information on the RPTCS Control, click here. BROCHURE To download a PDF of the RTS-30, 30 Cycle rated Transfer Switch Brochure, click here. USER MANUAL To download a PDF of the RTS-30, 30 Cycle rated User Manual, click here. Note: User manual configured for double sided printing and contains blank pages.

First medium-voltage automatic transfer switch tested, listed, and labeled by UL for use on emergency systemsAvailable at 5-15kV, 1200-Amp and 2000-Amp continuous current ratingsConfigurable for open- or closed-transition transferAdjustable Center-Off Time DelayRusselectric RPTCS programmable microprocessor-based control systemAdjustable center-off time delayUL TESTED, LISTED, AND LABELED Russelectric was the industry leader in obtaining UL listing for its medium-voltage transfer switchgear. All Russelectric RTS Series circuit breaker automatic transfer switches have been fully UL tested, listed, and labeled under UL 1008A. In addition, all Russelectric medium-voltage transfer switchgear (operating above 600 volts and below 15 kV) is listed per UL category Circuit Breakers and Metal-Clad Switchgear Over 600 Volts (DLAH). It is also designed, manufactured, and tested to meet or exceed stringent IEEE, NEMA, and ANSI standards. RUGGED HIGH SPEED SWITCHING DEVICES Russelectric RTS Series Russelectric Medium-Voltage Circuit Breaker type Automatic Transfer Switches are designed to transfer electrical loads from a normal power source to an emergency power source upon reduction or loss of voltage and to retransfer loads when normal power is restored. Supervised by the advanced RPTCS microprocessor control, Russelectric Medium-Voltage Circuit Breaker Automatic Transfer Switches direct the flow of electric power through the carefully timed openingclosing of circuit breakers. START A CONVERSATIONWITH OUR ENGINEERS Name Company Phone Email Project Details SEND AVAILABLE IN AUTOMATIC TRANSFER SWITCH AND BYPASSISOLATION CONFIGURATIONS Automatic Transfer Switch (A) BypassIsolation Switch (B) DESIGNED, FOR MAXIMUM SAFETY AND OPERATING SIMPLICITY Switches are designed to provide maximum protection for operators and maintenance personnel and to minimize the danger of operator error. Drawout modules, metal-clad construction, segregation of controls from power elements, and separately accessible grounded compartments are all part of Russelectrics design safety philosophy. All switches are designed for unattended automatic operation, but include controls for manual operation. Designs provide accessibility for maintenance, trouble-shooting, and component replacement. All switches are factory tested for functionality prior to shipment. Interconnect wiring diagrams enable proper interfacing of switches. DESIGN, MANUFACTURE, AND TESTING All bus is formed, cut, and punched before being insulated with high-dielectric epoxy coating to guarantee the integrity of the insulation and ensure maximum performance. Busbars pass throughtrack-resistant, polyester glass barriers between cubicles. Main bus joints have silver-plated connections and are insulated with preformed boots. All transfer switches are thoroughly inspected and tested both mechanically and electrically under simulated operating conditions before shipment.