Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

SC

Spence Control Engineering Dist. - M & M Control
location United States

Write a Review
Call Now Call Now

Our Products

  1. Industrial Valves 89 Products available
  2. Valves & Valve Fittings 61 Products available
  3. Separators & Strainers 12 Products available
  4. Pet And Farming Animals 12 Products available
  5. Flush Bottom Outlet Valve 5 Products available
  6. Process Control Systems & Equipment 4 Products available
  7. Chemical Reactors & Process Tanks 4 Products available
  8. Measurement Gauges & Fittings 4 Products available
  9. Pipeline Accessories 4 Products available
  10. Commercial Air Conditioner 3 Products available
  11. Others Products 114 Products available

Our Products

Our product range contains a wide range of AE Series Actuators, Panel Mount, Surge Anticipator Valve, Filter Regulator Lubricator and Radiator Traps

AE Series Actuators

AE Series Actuators
  • Duty Cycle 25%
  • Actuator Model AE200
  • Breakaway Torque Output (in.-lbs.) 200 in-lbs
Ruggedly built and designed for easy installation, new Apollo AE Serieselectric actuators deliver the most standard features and performance intheir class. Now CSA listed all sizes as standard.FIVE OUTPUT TORQUES, ONE HOUSING200, 400, 600, 800 and 1, 000 inch-poundsLong Service LifeAnodized die cast aluminum housingFiberglass reinforced nylon cover resists corrosionNitrile gasket and seals cover all penetration points in housing and coverPrecision cut and heat treated alloy spur gearsPermanently lubricated enclosed gear trainNEMA 4, 4X
View Complete Details
Ask Latest Price & Details
Floating Lever Drain Traps

Floating Lever Drain Traps
  • Model 180 LD Series
All-stainless steel for horizontal installation. Armstrong's stainless steel, free-floating guided lever drain traps use the same bodies, caps, lever mechanisms, valves and seats as Armstrong inverted bucket steam traps. The hemispherical valve, seat and leverage of the 180-LD and 181-LD stainless steel traps are identical in design, materials and workmanship to those for saturated steam service up to 570 psig (39 bar), except that the 180 Series traps have a guidepost to ensure a positive leak-tight valve closing under all conditions. The 180 Series is designed for situations where mounting a drainer close to the floor is critical. A back vent connection is required.
View Complete Details
Ask Latest Price & Details
Stonel Quartz Limit Switch

Stonel Quartz Limit Switch
  • Part Number 3T-LS3-02
  • Model No. FMYB-5120
The Quartz is available in explosion proof (QX), nonincendive and intrinsically safe(QN) and general purpose (QG) versions. The robust epoxy coated anodized aluminumconstruction makes this platform extremely durable and well suited for use in corrosive, heavy wash down environments. A broad range of switching, position transmitter andcommunication options may be selected to accommodate most applications.
View Complete Details
Ask Latest Price & Details
Flanged

Flanged
  • Model Number PRHLF
  • Series 36HLF
Lead Free Direct Acting, High Capacity, 12" to 3" NPT, 2-12" & 3" Flanged. (Lead Free: The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average. Complies with CA AB 1953 and VT S.152. ANSI 3rd party certified and listed.)
View Complete Details
Ask Latest Price & Details
Side-mounted Handwheels

Side-mounted Handwheels
  • Series 20-400
Rated: 125 psig @ 350F, 300 psig @ 100FSide-mounted handwheels allow water gauge operation in hard-to-reach places; with all the 20 Series design features.
View Complete Details
Ask Latest Price & Details
Pneumatic Actuators

Pneumatic Actuators
Designed and manufactured for the ultimate in durability and reliability, the new Apollo Pneumatic Rack & Pinion Actuatorsprovide outstanding service life.Apollo Rack & Pinion actuators have replaceable insert drive adapters in all but the largest models, and many units have dual Fseries bolt patterns. The numerous actuator drive and bolt pattern combinations allow direct mounting of several valve styles.
View Complete Details
Ask Latest Price & Details
Hot Water Space Heating Boilers

Hot Water Space Heating Boilers
  • Sizes 1/2"
Balanced piston for closer outlet pressure control regardless of variations in inlet pressure and a rapid fill feature with an improved larger seat for higher capacities and quicker fill. Has an iron body, brass internal parts on the regulator, special heat resistant composition diaphragm and O-rings, brass strainer screen, and stainless steel springs. Relief valve has bronze body, silicone seat disc and stainless steel spring.
View Complete Details
Ask Latest Price & Details
Panel Mount

Panel Mount
  • Series R9000
Fireye offers a number of Series 9000 Flame Amplifiers for use with the Series 9000 Flame Scanners. Each flame amplifier provides a flame relay, marginal alarm relay, adjustable flame threshold, adjustable flame failure response time (FFRT), built-in flame meter, 0-10 VDC output for a remote flame meter, and two separate adjustable gain settings selectable via external contacts.
View Complete Details
Ask Latest Price & Details
Luminescent Scanners

Luminescent Scanners
  • Series C9000
Fireye offers a number of C9000 Series Flame Scanners for use with the R9000 Series Flame Amplifiers. Each scanner incorporates a flame detector (ultraviolet andor infrared detector) with sensitivity adjustment, and a mechanical light blocking chopper assembly (except model C9506). Flame scanners are available with either a military style connector or lead wires. Flame scanners with lead wires provide 12" NPSM tap for electrical fitting unless otherwise noted. The description of each part number lists the replacement components associated with each scanner.
View Complete Details
Ask Latest Price & Details
Line Blinds

Line Blinds
Keckley quick acting fabricated line blinds are designed for applications where positive, visual indications of line closureopening are required. Keckley quick acting line blinds are commonly found in oil and refinery, petrochemical, pulp and paper, and maritime industries. With the Keckley quick acting line blind, one operator can change a 6" line blind in five minutes without the need for special tools as compared to a typical 6" spectacle blind, which takes two maintenance men approximately 1-12 hours to change over.
View Complete Details
Ask Latest Price & Details
Eliminate Water Hammer

Eliminate Water Hammer
Patented thermoplastic gear driven operating nut rotates 360 to achieve a 90 turn of the ball. The result is slow closure and the elimination of water hammer, while maintaining the positive shut- off and reliable service of a ball valve.
View Complete Details
Ask Latest Price & Details
Surge Anticipator Valve

Surge Anticipator Valve
  • Model 52-03 / 652-03
The Cla-Val Model 52-03652-03 Surge Anticipator Valve is indispensable for protecting pumps, pumping equipment and all applicable pipelines from dangerous pressure surges caused by rapid changes of flow velocity within a pipeline. When using this valve, pumping systems are started and stopped gradually preventing harmful surges from occurring.
View Complete Details
Ask Latest Price & Details
Close Nipples

Close Nipples
  • Sizes 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2"
Cash Acme close nipples are designed to connect various products that have NPT threads. Made of brass, with short lay lengths and available in the following sizes: 1.125 (12"), 1.375 (34"), 1.5 (1"), 1.625 (1-14"), 1.75 (1-12") and 2 (2").
View Complete Details
Ask Latest Price & Details
Double Check Valve Assemblies

Double Check Valve Assemblies
  • Series 4A-100 / 4ALF-100
Top Entry Double Check Valve Assembly, Bronze Body, Modular Cartridge Checks with replaceable seats & Reversible Silicone Seat Discs, 12" to 2" with ball valve shutoffs with SS handles + trim.
View Complete Details
Ask Latest Price & Details
Check Valve Assembly:

Check Valve Assembly:
  • Series 4S-100
Double Check Valve Assembly: Domestic Epoxy Ductile Iron Body; Flanged Body Connections, NRS, OS&Y Gate Options; SS Test Cock Handles & Trim. 10" Only.
View Complete Details
Ask Latest Price & Details
Inverted Bucket Drain Traps

Inverted Bucket Drain Traps
  • Model BVSW Series
Armstrong inverted bucket drain traps are designed for systems where heavy oil and dirt may be encountered. The enlarged bucket vent equipped with a scrub wire (BVSW) allows free flow through the bucket vent and discharge through the orifice in the top of the trap.
View Complete Details
Ask Latest Price & Details
Straight

Straight
  • Model RV-4 - Straight / Angle
Armstrong's thermostatic radiator valves are offered in straight, angle and reversed angle patterns. They are ideal for hot water and low-pressure steam-heated convectors, radiators, and thermostatically controlled hydronic or low-pressure heat exchangers.
View Complete Details
Ask Latest Price & Details
Steam Radiator Air Vents

Steam Radiator Air Vents
  • Model SV-12 Straight / Angle
The SV-12 Series has a vent port size for every room location, with the largest size for the coldest rooms and the smallest size for the "too hot" rooms. SV-12 air vents are easy to install on any steam radiator.
View Complete Details
Ask Latest Price & Details
Hose Station Less Hose

Hose Station Less Hose
  • Model 2032
The valve is supplied as standard with 34" inlet union connections, an outlet ball valve for flow control and an outlet dial thermometer. The unit is supplied fully assembled, pressure-tested and installed on a stainless steel hose rack.
View Complete Details
Ask Latest Price & Details
Bibb Faucets

Bibb Faucets
  • Series 35-200
The Apollo HB series compression hose bib has an aluminum handle and proven ASTM Grade bronze body for long term reliability. Features optimum flow capacity and 100% shut-off performance. Features heavy pattern with large flow path.Compression Bibb Faucet, 12" - 34"
View Complete Details
Ask Latest Price & Details
Bronze

Bronze
  • Series 70-100-BC
Combines two functions in a single design: positive shut-off and bubble-tight check capabilities. The BC Series is a unidirectional version of the industry standard Apollo 70 Series ball valve. Sizes: 12"-2"
View Complete Details
Ask Latest Price & Details
Filter Regulator Lubricator

Filter Regulator Lubricator
Marsh Bellofram Filter-Regulator-Lubricators (FRLs) are designed with economy and convenience in mind. Filter Regulators have the same features as the regulators with the addition of polycarbonate bowls, 5 or 50 micron filters, and with manual, semi-automatic or automatic drains. Lubricators feature polycarbonate bowls, with field-settable dials providing variable lubrication between 0 and 90 drips per minute.
View Complete Details
Ask Latest Price & Details
Digital Pressure Indicator

Digital Pressure Indicator
The Marsh Instruments Digital Pressure Indicator is portable, lightweight, hand-held testing and calibrating instrument that indicates pressure to 50 psig at accuracy levels of 0.25% of reading 1 count.
View Complete Details
Ask Latest Price & Details
Radiator Air Vents

Radiator Air Vents
  • Model AV-11/AV-13
The Armstrong RV-4 one-pipe radiator valve is a state-of-the-art thermostatic radiator valve for low-pressure steam service. The valve provides accurate and automatic control of the temperature in individual rooms, through automatic air venting.
View Complete Details
Ask Latest Price & Details
Water Expansion Tank

Water Expansion Tank
  • Model EXT
Expansion Tanks, Hydronic, 2 to 13 gallon. Apollo Model EXT expansion tanks are US made and designed for use in hot water boiler installations for Hydronic heating applications to absorb pressure increases caused by thermal expansion from the heating process. Not for use with potable water systems.
View Complete Details
Ask Latest Price & Details
Armstrong T-Wafer

Armstrong T-Wafer
The T-wafer capsule is a compact, easy-to-install welded wafer element. The capsule is designed so that it can be easily adapted to almost any radiator trap currently in use.
View Complete Details
Ask Latest Price & Details
Orifice Plate Assembly

Orifice Plate Assembly
  • Model X52E
The Cla-Val Model X52E Orifice Plate Assembly is typically used with Cla-Val flow control valves. The orifice plate is an essential component used to generate a specific, predictable pressure drop in the system. The X52E uses a wafer design holder which offers a compact lightweight assembly that is easy to install.
View Complete Details
Ask Latest Price & Details
OSHA Lockout Device

OSHA Lockout Device
The Apollo Lockout Tagout accessory for actuators complies with OSHA1910.147 guidelines. It insures complete lockout capability in both the fullyopen or the fully closed position. Its design prevents accidental or malicioustampering of an automated valves orientation.The housing is constructed in investment cast 316SS, the fasteners, the lockpin, and the coupling are made of 300 Series stainless steel. This ruggedconstruction, plus two acetal bushings located above and below the coupling, assures the strength and support necessary to withstand the torque andtorsion generated by the actuator mounted above.
View Complete Details
Ask Latest Price & Details
electric actuators

Electric Actuators
Conbracos CS and CL electric actuators are split phase reversing AC motorsfor standard duty or brushless DC Motors for continuous duty. Eight sizesare available which produce breakaway torques between 150 and 3000 lbin.They are excellent industrial quality units capable of onoff, fail safe, andmodulating applications. The efficient spur gear drive train is supported bypermanently-lubricated bearings making it very secure while eliminating thepotential for side loading of the output shaft.
View Complete Details
Ask Latest Price & Details
Infrared Flame Scanners

Infrared Flame Scanners
  • Series UVIA
Ultraviolet miniature non self-checking scanners. The UV1A is suitable for fuel gases and no. 2 oil. Non-replaceable tube. Mounting collar 12" NPT. Available with 3 ft (UV1A3), 6 ft. (UV1A6), or 50 ft. (UV1A50) of flexible conduit. Explosion proof housings are available.
View Complete Details
Ask Latest Price & Details
Diaphragm Air Cylinders

Diaphragm Air Cylinders
Marsh Bellofram diaphragm Air Cylinders are actuators made from elastomers, engineered metals and fabrics. They require no lubrication and are virtually frictionless and economical. They can be used to provide lifting, clamping, pushing, coining, turning and other linear force or actuation motions in many applications.
View Complete Details
Ask Latest Price & Details
Pneumatic Relays

Pneumatic Relays
Marsh Bellofram pneumatic relays are designed to provide cost-effective, high-performance air regulation across a variety of applications, and in support of a variety of market requirements. Available versions and types include two-stage, pilot operating 1:1; positive and negative biasing, positive bias booster, high relief, adjustable bias, and ratio high-flow relays, all of which provide highly accurate and reliable output pressure control.
View Complete Details
Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.