-
GC-1-02-C
-02
-
GC-1-03-C
-03
Dovetailed grooves are recommended since they hold the gaskets in place and allow the gaskets to expand laterally as they are deflected without constraining the sides. See below for ordering information. Manufacturing Considerations To use the groove properly, care must be exercised during its manufacture. The flatness between the bottom of the groove and top surface must be held flat within .001. This can be easily achieved by taking a fly-cut on the surface prior to milling the groove. Note: do not remove the part from the mill between making the fly-cut and milling the groove. In milling the groove, a regular o-ring groove using the dimensions of "W" and "L" must be made first, then finished up with a dovetail cutter. To deburr use a Scotch Brite pad (a deburring knife will destroy the "W" tolerance). Click to view the Groove Cutter Speed and Feed Data for high speed end mill applications if desired.
Write a Review
(Spira Manufacturing Corp.)
North Hollywood, CA 91605-3522 map, United States
Share us via
