Technetics Polymers

United States

Protective Tape & Film for Archival Packaging and Storage RELIC WRAP protective PTFE tape & film is the safe way to package, archive, store and transport fine art, books and artifacts. Made in the USA, RELIC WRAP is available in three forms to allow for complete flexibility in your packaging needs. PTFE is an optimal material to provide the protective layer nearest to valuable art. It is inert, soft, flexible, temperature resistant to 550F (288C), acid-free and will not stick to the objects it is protecting. PTFE is also a thermal insulator. RELIC WRAP is completely unaffected by ultraviolet (UV) radiation, incandescent or fluorescent light exposure. It will not rot or support fungus for mildew.RELIC WRAP Packaging Film Ideal for filling voids around artifacts that are non-uniform in size, RELIC WRAP is also used as a protective layer that can be wrapped around any form of art, providing a nonstick, colorfast, conforming inner layer before additional packaging layers are applied. RELIC WRAP Film is available in rolls up to 10 wide, 0.003 thick, and 1, 000 feet in length. Technetics recommends that our PTFE tapes are stored and maintained in a controlled environment and the shelf life shall not exceed five (5) years. A controlled environment shall be clean and temperature at or below 72F (22C) with relative humidity not to exceed 50%. In addition, all material must be stored in its original condition and shipping containers. Should this become a concern, please contact us to discuss your specific requirements.

Custom PTFE solutions to meet critical needs With a focus on customer responsiveness and short lead times, our AMILON family of custom PTFE products can incorporate a wide range of fillers including glass, graphite, molybdenum disulfide or bronze, and are easily identified by their distinct colors, including the FDA-approved, white AMILON 3. Our applications engineers are available to help you identify the materials that best meets your specific application needs. AMILON PTFE products are useful when high-performance characteristics for thermal conductivity, coefficient of friction, compressive strength, wear rate, creep or cold flow are required. They can withstand temperature extremes from -400F (-240C) to 500F (260C) and offer excellent abrasion and corrosion resistance. We offer a wide range of standard formulations, but sometimes an off the shelf polymer just wont do. In those cases, our applications engineers will work with you to develop a custom compound to meet your critical application needs. Custom compounds can be developed for specific performance characteristics in the areas of thermal conductivity, coefficient of friction, compressive strength, wear rate, creep and cold flow. Available Sizes Molded sheets up to 48 x 48 up to 8 thickSkived sheets up to 62 wide 0.001 to 0.375 thickRod and Cylinders up to 60 O.D.

High Performance, Unsurpassed Cleanliness and Endless Versatility TEXOLON PTFE products deliver uncompromising performance and unsurpassed precision for critical applications. Developed and compounded at our in-house facilities, TEXOLON PTFE products are manufactured under strict quality control standards to ensure exceptional uniformity and consistency in every product. Wide variety of custom fillers available Glass fiberCarbonGraphiteMolybdenum disulphideBronzeVarious pigmentsOur manufacturing processes: Auto Compression and Isostatic molding Auto compression molding, also referred to as auto molding, can create a wide variety of shapes and geometries to close tolerances using part ejection, pressure application and automatic cavity fill techniques. This process is not only more cost-effective, but also eliminates stress cracks and related defects compared to traditional machining. Isostatic molding applies pressure to all sides of the molded part (whereas compression molding applies pressure in only one direction) to create highly consistent material properties and bring a part very close to its final shape. Isostatic molding is ideal for forming unusual shapes, such as cups, buckets, tapered sleeves and closed-end cylinders. Your trusted industry partner No matter the process or material configuration you choose, Technetics PTFE & Polymer Solutions is committed to being a reliable, responsive partner, providing unmatched material and application expertise, and delivering products with exceptional purity, cleanliness and quality.

High-performance PTFE shaped to your specifications TEXOLON brand molded PTFE sheet is available in standard and custom sizes ranging from 0.063" to 8" thick, up to 48" x 48" square. Standard PTFE sheet sizes include 24 x 24, 36 x 36 & 48 x 48. Using our advanced compression molding process, we can make PTFE sheets with a very high quality surface finish, free from stress cracks and close to the dimension of the end product, maximizing economy and reducing material loss. Additional fabrication, machining, and milling are also offered through our in-house machining facility. All molded PTFE can be furnished with one or more surfaces modified by either sodium ammonia or sodium naphthalene etch to ensure excellent bonding ability. Molded PTFE sheets are available in a wide variety of virgin and modified resins as well as PTFE compounds. Style 8764 When you can't afford failure Premium virgin PTFE sheet manufactured from only the highest quality PTFE resins. Style 8764 is ideal for a wide range of applications and especially useful where only the highest mechanical and electrical properties and purity will suffice.

Custom thicknesses for a wide range of applications Our skived PTFE sheets provide unsurpassed precision and cleanliness for a wide range of critical applications, including tank lining in the chemical processing and semiconductor industries, where the prevention of leakage and contamination is vital to material purity and integrity. Skived PTFE sheets and films are available in a wide range of materials and in continuous rolls or cut to your desired length. We offer standard or custom widths to help you reduce scrap and waste. We can also laminate, punch, or die cut all of our skived PTFE sheet and film products. All our skived PTFE sheets and films can be furnished with one or both surfaces etched for adhesive bonding. We also offer a wide range of high performance skived tapes and films for critical applications. You can learn more about those here. Sizes Skived PTFE sheets and films are available from 0.001 to 0.375 thick. Widths up to 60 available.